High-sensitivity avalanche photodiodes (APDs) are used to amplify weak optical signals in a wide range of applications, including telecommunications, data centers, spectroscopy, imaging, light detection and ranging, medical diagnostics, and quantum applications. This paper reports antimony-based separate absorption, charge, and multiplication structure APDs on InP substrates. Al0.7In0.3As0.79Sb0.21 is used for the multiplier region, and InGaAs is used as the absorber. The excess noise is comparable to that of silicon APDs; the k-value is more than one order of magnitude lower than that of APDs that use InP or InAlAs for the gain region. The external quantum efficiency without an anti-reflection coating at 1550 nm is 57%. The gradient of the temperature coefficient of avalanche breakdown voltage is 6.7 mV/K/μm, which is less than one-sixth that of InP APDs, presenting the potential to reduce the cost and complexity of receiver circuits. Semi-insulating InP substrates make high-speed operation practical for widely reported AlxIn1−xAsySb1−y-based APDs.
For short-wavelength infrared (SWIR) avalanche photodiodes, a separate absorption, charge, and multiplication design is widely used. AlInAsSb on an InP substrate is a potential multiplication layer with a lattice match to absorber candidates across the SWIR. Our new measurements demonstrate that AlInAsSb on InP is a promising multiplier candidate with a relatively low dark current density of 10−4 A/cm2 at a gain of 30; a high gain, measured up to 245 in this study; and a large differentiation of electron and hole ionization leading to a low excess noise, measured to be 2.5 at a gain of 30. These characteristics are all improvements over commercially available SWIR detectors incorporating InAlAs or InP as the multiplier. We measured and analyzed gain for multiple wavelengths to extract the ionization coefficients as a function of an electric field over the range 0.33–0.6 MV/cm.
Background doping polarity is a critical design parameter for the performance of many optoelectronic devices, including avalanche photodiodes. We have applied a technique by using capacitance–voltage (CV) measurements on double mesa structures with a p-i-n or n-i-p homojunction to determine the background polarity type of the unintentionally doped intrinsic region. Because CV measurements scale with the size of the mesa, they support design flexibility in producing variable-sized top and bottom mesa diameters. In this work, we grew, fabricated, and tested AlGaAsSb and AlInAsSb random alloy double mesa p-i-n structures and undertook CV measurements at 295, 150, and 77 K. It was found that the capacitance varied with the top mesa diameter for both material systems, and not the bottom mesa diameter, indicating that the unintentionally doped intrinsic region is n-type in nature.