Oily wastewater is a major environmental issue resulting from different industrial and manufacturing activities. Contaminated water with oil represents a significant environmental hazard that can harm numerous life forms. Several methodologies have been tested for the removal of oily wastewater from aqueous solutions, and adsorption in a flow-through reactor is an effective mechanism to reduce these effluents. This study focuses on evaluating the ability of Fe3O4/Bent material to adsorb gasoline emulsion from a solution using a fixed-bed column, and it involves analyzing the resulting breakthrough curves. The FT-IR, SEM, EDX, and XRD techniques were used to characterize Fe3O4/Bent. Various ranges of variables were examined, including bed height (2–4 cm), flow rate (3–3.8 mL/min), and initial concentration (200–1000 mg/L), to determine their impacts on the mass transfer zone (MTZ) length and the adsorption capacity (qe). It was shown that a higher bed height and a lower flow rate contributed to a longer time of breakthrough and exhaustion. At the same time, it was noted that under high initial gasoline concentrations, the fixed-bed system rapidly reached breakthrough and exhaustion. Models like the Yoon–Nelson and Thomas kinetic column models were employed to predict the breakthrough curves. Thomas and Yoon–Nelson’s breakthrough models provided a good fit for the breakthrough curves with a correlation coefficient of R2 > 0.95. Furthermore, with a fixed-bed system, the Thomas and Yoon–Nelson models best describe the breakthrough curves for gasoline removal.
Rapid industrial development has led to the discharge of significant amounts of untreated industrial wastewater into the environment, resulting in substantial effects on natural ecosystems and human health. Consequently, there is a need to develop new environmentally friendly alternatives for water remediation. In this regard, chitosan (CS) aerogels possess high porosity, low density, and biodegradability, and act as effective sorbents for the removal of various ionic pollutants from water, air, and soil. The presence of numerous amino (–NH2) and hydroxyl (OH) groups enhances the adsorption of ionic pollutants via electrostatic interactions, hydrogen bonding, and chelation mechanisms. This review provides an overview of the use of chitosan-based aerogels as eco-friendly gels to remove different contaminants from water such as dyes, heavy metals, microorganisms, and pharmaceuticals, by improving the mechanical strength, decreasing hydrophilicity, and increasing acid stability. These improvements are accomplished using different modification methods, such as blending with nanofillers, chemical and/or ionic crosslinkers, and designing composite aerogels. The modified aerogel exhibits excellent adsorption ability against different contaminants, as well as antibacterial properties, making it promising candidates for a wide range of applications.
In this paper, swarm intelligence optimisation algorithms are used to estimate the optimal size of the glass fibre of circular cross section of a glass-epoxy composite. Finding the best fibre size in a composite material has significant benefits on cost reduction. A comparative study was done to select optimal fibre diameter that can satisfy the optimal longitudinal tensile strength. Particle swarm optimisation algorithm PSO and artificial bee colony algorithm ABC are proposed for this comparative study.