Haidar Hasan Mohammed

Dr. Haidar Hasan Mohammed

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 July 2025 in RSC Advances
Verified
Journal Article
Open access
PDF file
YYYusur Yahia
Yusur Yahia
Khalid Turki RashidKhalid Turki Rashid
Khalid Turki Rashid
Mohammed Ahmed ShehabMohammed Ahmed Shehab
Mohammed Ahmed Shehab
AAAdnan A. AbdulRazak
Adnan A. AbdulRazak
MGMaryam Y Ghadhban
Maryam Y Ghadhban
Mahmood ALHAFADHIMahmood ALHAFADHI
Mahmood ALHAFADHI
The environment and human health are greatly suffering as a result of pollution. The textile sector is a significant generator of dyes, which are colored chemicals that are among the most significant water pollutants. In order to produce and optimize green mixed matrix membranes (MMMs) for the treatment of wastewater discharged from the textile industry, propolis (bee glue) was used as an additive to improve the performance of the PES membrane. This work utilized analysis of variance (ANOVA) and response surface methodology (RSM) to optimize the ultrafiltration (UF) process for the treatment of wastewater contaminated with Congo red. Specifically, the primary and interrelated effects of three preparation and operating parameters, additive content, transmembrane pressure, dye feed concentration on the membrane permeate flux, and CR dye rejection using the PES/PRS membrane were examined to optimize the UF process. Transmembrane pressure (1–5 bar), dye concentration (100–300 ppm), and PRS NP content (0–88 mg) were among the factors examined. Optimization results showed that PES/PRS MMMs were the most efficient, with a dye rejection rate of 99.8% and a flux of 48.44 kg m−2 h−1, at a PRS content of 64.43 mg, operating pressure of 5 bar and CR dye feed concentration of 210.08 ppm. Overall, this research not only shows that innovative PES/PRS UF membranes have the potential to treat wastewater containing dyes very well, but it also offers a useful comprehension of the dye-rejection process, which may direct the logical design of UF membranes. This work showed that the PES/PRS membrane would be a viable option for wastewater industrial applications in terms of its CR dye removal effectiveness under ideal operating circumstances.

10 September 2024 in Chemengineering
Verified
Journal Article
Open access
PDF file
MSMohammed Ahmed Sarran
Mohammed Ahmed Sarran
AAAdnan A. AbdulRazak
Adnan A. AbdulRazak
MAMohammed F. Abid
Mohammed F. Abid
AAALAA Dhari JAWAD AL-BAYATI
ALAA Dhari JAWAD AL-BAYATI
Khalid Turki RashidKhalid Turki Rashid
Khalid Turki Rashid
MAMohammed Alktranee
Mohammed Alktranee
Oily wastewater is a major environmental issue resulting from different industrial and manufacturing activities. Contaminated water with oil represents a significant environmental hazard that can harm numerous life forms. Several methodologies have been tested for the removal of oily wastewater from aqueous solutions, and adsorption in a flow-through reactor is an effective mechanism to reduce these effluents. This study focuses on evaluating the ability of Fe3O4/Bent material to adsorb gasoline emulsion from a solution using a fixed-bed column, and it involves analyzing the resulting breakthrough curves. The FT-IR, SEM, EDX, and XRD techniques were used to characterize Fe3O4/Bent. Various ranges of variables were examined, including bed height (2–4 cm), flow rate (3–3.8 mL/min), and initial concentration (200–1000 mg/L), to determine their impacts on the mass transfer zone (MTZ) length and the adsorption capacity (qe). It was shown that a higher bed height and a lower flow rate contributed to a longer time of breakthrough and exhaustion. At the same time, it was noted that under high initial gasoline concentrations, the fixed-bed system rapidly reached breakthrough and exhaustion. Models like the Yoon–Nelson and Thomas kinetic column models were employed to predict the breakthrough curves. Thomas and Yoon–Nelson’s breakthrough models provided a good fit for the breakthrough curves with a correlation coefficient of R2 > 0.95. Furthermore, with a fixed-bed system, the Thomas and Yoon–Nelson models best describe the breakthrough curves for gasoline removal.

18 August 2025 in RSC Advances
Verified
Journal Article
Open access
PDF file
Mohammed Ahmed ShehabMohammed Ahmed Shehab
Mohammed Ahmed Shehab
MAMunaf Al-lami
Munaf Al-lami
MTMohammad A. Taher
Mohammad A. Taher
HMHaidar Hasan Mohammed
Haidar Hasan Mohammed
AAAdnan A. AbdulRazak
Adnan A. AbdulRazak
SASaad Jabber Alsarayefi
Saad Jabber Alsarayefi
Rapid industrial development has led to the discharge of significant amounts of untreated industrial wastewater into the environment, resulting in substantial effects on natural ecosystems and human health. Consequently, there is a need to develop new environmentally friendly alternatives for water remediation. In this regard, chitosan (CS) aerogels possess high porosity, low density, and biodegradability, and act as effective sorbents for the removal of various ionic pollutants from water, air, and soil. The presence of numerous amino (–NH2) and hydroxyl (OH) groups enhances the adsorption of ionic pollutants via electrostatic interactions, hydrogen bonding, and chelation mechanisms. This review provides an overview of the use of chitosan-based aerogels as eco-friendly gels to remove different contaminants from water such as dyes, heavy metals, microorganisms, and pharmaceuticals, by improving the mechanical strength, decreasing hydrophilicity, and increasing acid stability. These improvements are accomplished using different modification methods, such as blending with nanofillers, chemical and/or ionic crosslinkers, and designing composite aerogels. The modified aerogel exhibits excellent adsorption ability against different contaminants, as well as antibacterial properties, making it promising candidates for a wide range of applications.

24 April 2026 in RSC Advances
Verified
Journal Article
Open access
SASaba Ahmed Abdulkareem
Saba Ahmed Abdulkareem
Khalid Turki RashidKhalid Turki Rashid
Khalid Turki Rashid
AAAdnan A. AbdulRazak
Adnan A. AbdulRazak
Mohammed Ahmed ShehabMohammed Ahmed Shehab
Mohammed Ahmed Shehab
MAMohammed Al-Mandalawi
Mohammed Al-Mandalawi
HMHaidar Hasan Mohammed
Haidar Hasan Mohammed
Green functional resource for tailoring membrane features and performance in wastewater treatment.