ALAA Dhari  JAWAD AL-BAYATI

Dr. ALAA Dhari JAWAD AL-BAYATI

orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 September 2024 in Chemengineering
Verified
Journal Article
Open access
PDF file
MSMohammed Ahmed Sarran
Mohammed Ahmed Sarran
AAAdnan A. AbdulRazak
Adnan A. AbdulRazak
MAMohammed F. Abid
Mohammed F. Abid
AAALAA Dhari JAWAD AL-BAYATI
ALAA Dhari JAWAD AL-BAYATI
Khalid Turki RashidKhalid Turki Rashid
Khalid Turki Rashid
MAMohammed Alktranee
Mohammed Alktranee
Oily wastewater is a major environmental issue resulting from different industrial and manufacturing activities. Contaminated water with oil represents a significant environmental hazard that can harm numerous life forms. Several methodologies have been tested for the removal of oily wastewater from aqueous solutions, and adsorption in a flow-through reactor is an effective mechanism to reduce these effluents. This study focuses on evaluating the ability of Fe3O4/Bent material to adsorb gasoline emulsion from a solution using a fixed-bed column, and it involves analyzing the resulting breakthrough curves. The FT-IR, SEM, EDX, and XRD techniques were used to characterize Fe3O4/Bent. Various ranges of variables were examined, including bed height (2–4 cm), flow rate (3–3.8 mL/min), and initial concentration (200–1000 mg/L), to determine their impacts on the mass transfer zone (MTZ) length and the adsorption capacity (qe). It was shown that a higher bed height and a lower flow rate contributed to a longer time of breakthrough and exhaustion. At the same time, it was noted that under high initial gasoline concentrations, the fixed-bed system rapidly reached breakthrough and exhaustion. Models like the Yoon–Nelson and Thomas kinetic column models were employed to predict the breakthrough curves. Thomas and Yoon–Nelson’s breakthrough models provided a good fit for the breakthrough curves with a correlation coefficient of R2 > 0.95. Furthermore, with a fixed-bed system, the Thomas and Yoon–Nelson models best describe the breakthrough curves for gasoline removal.

1 March 2016 in Engineering and Technology Journal
Verified
Journal Article
Open access
PDF file
AAALAA Dhari JAWAD AL-BAYATI
ALAA Dhari JAWAD AL-BAYATI
The effect of type of fixative material and the perfume formulation parameters (Concentration of ethyl alcohol, percentage of perfume and the percentage of the fixative used) were studied to determine the optimum conditions give perfume with high retention time (fixative), also the fixation time was compared with brand perfumes. Four fixative materials were studied; Sandal oil, Musk oil, Glycerin and benzyl benzoate. Design of experiments (DOE) with Minitab 15 software was done and leaded to minimum 20 runs necessary for this study. For the four fixatives the runs were eighty .The maximum fixation time of all the fixation materials are 6.3, 6.1, 5.9 and 5.9 h/g for Glycerin, Musk, Sandalwood and benzyl benzoate respectively with formulation parameters of (75% alcohol concentration, 30% perfume addition and 0.1% fixative material) for Musk, Glycerin and benzyl benzoate fixative materials and (85% alcohol concentration, 17.5% perfume addition and 0.55% fixative material) for Sandalwood as fixative material. The brand perfumes as Channel give 2h/g fixation time and for many other brand perfumes give fixation time in the range of 2.2-2.9h/g.

30 December 2025 in Journal of Studies in Science and Engineering
Verified
Journal Article
Open access
PDF file
AAALAA Dhari JAWAD AL-BAYATI
ALAA Dhari JAWAD AL-BAYATI
QAQusay Al-Obaidi
Qusay Al-Obaidi
Buthainah Ali AL-TimimiButhainah Ali AL-Timimi
Buthainah Ali AL-Timimi
QAQusay Al-Obaidi
Qusay Al-Obaidi
ZAZainab J. Abdul-Zahra
Zainab J. Abdul-Zahra
Rashed RasheedRashed Rasheed
Rashed Rasheed
Industrial wastewater treatment techniques for pollutant removal have restrictions due to their high cost and low efficiency. The objective of this recent work is to develop high-performance nanocomposites to remove the bromothymol blue dye (BTB) from industrial wastewater. The nanocomposites developed and tested are composed of manganese oxide-titanium dioxide/Multi-walled carbon nanotubes (Mn/Ti/MWCNTs) nanoparticles of various concentrations. The synthesized nanocomposites have been characterized using X-ray diffraction (XRD), Energy-dispersive X-ray spectroscopy (EDX), and Field Emission Scanning Electron Microscopy (FESEM) techniques. Results show that the addition of metal oxide nanoparticles to the MWCNTs matrix significantly enhanced removal efficiency. The developed Mn/Ti/MWCNTs nanocomposite achieved 78% removal of BTB from industrial wastewater. The Mn-Ti/CNTs nanocomposite exhibits a removal enhancement of MWCNTs alone was 45% and 32% over TiO₂:MnO₂ nanocomposite. The results of the current study demonstrate that the hybrid nanocomposite offers efficient removal of BTB from dye industrial wastewater compared to nano elements alone.

16 May 2026 in Catalysts
Verified
Journal Article
Open access
PDF file
SFSEERAT FATIMA
SEERAT FATIMA
MAMuhammad Azriel Irfan Bin Azhar
Muhammad Azriel Irfan Bin Azhar
AAALAA Dhari JAWAD AL-BAYATI
ALAA Dhari JAWAD AL-BAYATI
SASarah R. Al-Karkhi
Sarah R. Al-Karkhi
ZSZainab Y. Shnain
Zainab Y. Shnain
BABamidele Victor Ayodele
Bamidele Victor Ayodele
The interest in more sustainable energy sources has necessitated research in hydrogen production from various reliable pathways. This study investigates the potential of hydrogen production by ethanol-assisted CO2 reforming over Al-MCM-41-supported Ni catalysts considering the effect on the catalytic performance and stability. The Ni/Al-MCM-41 catalysts were synthesized via wet impregnation method and characterized using different instruments and techniques. Evidence of the formation of well-crystallized Ni nanoparticles dispersed on the Al-MCM-41 support was confirmed by X-ray diffraction analysis and field emission scanning electron microscopy. The amount of Ni loading, which varied from 5 to 15%, was confirmed using energy-dispersive analysis, while the mesoporous nature of the Ni/Al-MCM-41 was ascertained using N2 physisorption analysis. The performance of the Ni/Al-MCM-41 catalyst as a function of the ethanol conversion, CO2 conversion, hydrogen and CO yield is strongly corrected with Ni loading and reaction temperature. The ethanol conversion and hydrogen yield increase with the increase in reaction temperature. At a reaction temperature of 550 °C the lowest ethanol conversion and hydrogen yield of 32.3% and 33.7% were obtained over the 5 wt% Ni/Al-MCM-41 catalyst, while the highest ethanol conversion of 87.4% and hydrogen yield of 75.5% were obtained over the 15% Ni/Al-MCM-41 at 700 °C. The 15 wt% catalyst achieves the most balanced syngas profile at 700 °C, where the H2 and CO yields are optimized through the synergistic consumption of both ethanol and CO2. It can be inferred that the reaction follows a bifunctional pathway whereby the Ni active sites are responsible for the ethanol dissociation while the CO2 adsorption and activation are enhanced by the Al-MCM-41 support.