The utilization of enzyme-induced calcium carbonate precipitation (EICP) to consolidate aeolian sand has received significant attention in recent years. However, urease activity is directly affected by temperature, which varies greatly from day to night, especially in desert areas. To investigate the effect of alternating temperature on aeolian sand cementation by EICP, three experimental groups were designed to simulate the sunrise-to-sunset cycle in a natural desert environment: T1 (a process from heating to constant temperature to cooling), T2 (a process from cooling to constant temperature to heating), and T3 (a process of constant temperature throughout) as a control group. The differences in calcium carbonate content, precipitation rate of calcium carbonate, permeability coefficients, and shear wave velocity were compared and analyzed. Meanwhile, scanning electron microscopy (SEM) was conducted to observe the external cementation states by mineralization. The results showed that T2 had the highest calcium carbonate content, followed by T3 and, finally, T1, which were also confirmed by permeability coefficient and shear wave velocity tests. In addition, different alternating temperature processes would affect the survival time of the urease, and T2 showed the longest reaction time as the urease stayed active for the longest time in this process. The results provide a scientific reference for the selection of construction periods in which EICP can be optimally applied for the on-site aeolian sand cementation.
In subsurface irrigation systems in desert areas, the wetting front transport pattern allows the determination of irrigation flow and timing. In this study, an indoor subsurface irrigation experiment on aeolian sandy soil is designed, and the vertical and horizontal wetting front movement distances under different irrigation flows are obtained. The dimensional analysis method was used to perform a dimensional analysis on the experimental data. An empirical setting front distance estimation model, which only considers three parameters, saturated hydraulic conductivity Ks, irrigation flow Q, and total irrigation volume V, was proposed. The model’s accuracy was statistically evaluated with the observed data and verified by a numerical simulation using HYDRUS-2D/3D. The mean absolute error (MAE) and root mean square error (RMSE) of the proposed model in the horizontal and downward directions were 0.80 and 0.95 cm, respectively, with a percentage bias (PBIAS) of −3.47 ≤ ±10 and a Nash–Sutcliffe efficiency (NSE) of 0.98, which is close to 1. Thus, this model can contribute to the selection of the appropriate depth and spacing of subsurface laterals.
Landslides represent the most destructive and prevalent geological hazards along mountainous highways, severely imperiling the construction and maintenance of road infrastructure. To mitigate risks associated with high slopes during construction, a systematic evaluation of landslide susceptibility is imperative. This study introduces an assessment method developed over three years of engineering practice, integrating ten parameters that are intricately linked to construction scale, geological conditions, and engineering design. The method innovatively employs the Index Complexity Algorithm (ICA) to ascertain the weight distribution of the parameters, thereby diminishing the impact of subjective biases in qualitative assessments and enhancing the objectivity and precision of the evaluation. Utilizing the slope in China as a case study, the paper meticulously demonstrates the application of the assessment method. A comprehensive evaluation of the slope’s geological context, construction scale, and design rationality by the ICA algorithm yields a quantified risk score for the slope’s potential hazards. The findings indicate that the slope is classified as high risk (Grade III) during highway construction, necessitating the implementation of risk mitigation measures such as prestressed anchor cables and grouting anchorage. Beyond offering a novel methodological approach to landslide risk assessment, the method significantly contributes to the sustainable construction and operation of mountainous highways. Anticipated refinements in the assessment process and the parameter are poised to augment the method’s efficacy in slope engineering safety management, thereby bolstering the long-term stability and environmental sustainability of mountain highways.
The objective of this study is to investigate the potential risks posed by snowdrifts, a prevalent cause of natural disasters in northern China, on railway subgrades, and to assess their risk level. As a wind-driven process of snow migration and redeposition, snowdrifts pose a significant threat to the safety of transportation infrastructures. This study focuses on the Afu Railway in Xinjiang, situated on the northern slopes of the Eastern Tianshan Mountains, where it experiences periodic snowdrifts. We employed a combination of the Analytic Hierarchy Process (AHP) and fuzzy comprehensive evaluation (FCE) to construct an integrated evaluation system for assessing the risk of snowdrift to railway subgrades. The results indicate that subgrade design parameters and regional snowfield conditions are two key metrics affecting the extent of snowdrift disasters, with topography, vegetation coverage, and wind speed also exerting certain impacts. The evaluation method of this study aligns with the results of on-site observations, verifying its accuracy and practicality, thereby providing a solid risk assessment framework for snowdrifts along the railway. The scientific and systematic hazard assessment method of railway subgrades developed in this research provides basic data and theoretical support for future research, and provides a scientific basis for relevant departments to formulate countermeasures, so as to improve the safety and reliability of railway operations.
Bridge resilience assessment enables bridges to maintain their structural integrity and functionality in the face of loads and disasters, improves their reliability and recovery capability, and ensures the smooth flow of transportation. This study focuses on the assessment methods and indicator selection for the seismic resilience of bridges, summarizing the latest research progress in this field. It reviews the development history of commonly used bridge resilience assessment methods and frequently used assessment methods, and comparatively analyzes the advantages and disadvantages of experimental research and numerical simulation. Several bridge resilience assessment frameworks and evaluation models are introduced, including those for single bridges as well as for entire bridge networks, to assist researchers in selecting appropriate models and frameworks based on actual conditions. The key indicators for the seismic resilience assessment of bridges are reviewed, including structural strength, deformation capacity, durability, and reparability. Finally, future directions for research are proposed. The research indicates that assessment methods for bridge resilience under the coupled effects of multiple hazards are not yet mature and require further investigation. The close integration of intelligent algorithms with bridge resilience assessment is an important future research direction. This review aims to further promote the research and application of seismic resilience assessment for bridges.