Zhifeng Shu

Prof. Dr. Zhifeng Shu

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 September 2021 in Remote Sensing
Verified
Journal Article
Open access
PDF file
Jinlong YuanJinlong Yuan
Jinlong Yuan
KWKenan Wu
Kenan Wu
Tianwen WeiTianwen Wei
Tianwen Wei
LWLu Wang
Lu Wang
Zhifeng ShuZhifeng Shu
Zhifeng Shu
HXHaiyun Xia
Haiyun Xia
Evaluation of the cloud seeding effect is a challenge due to lack of directly physical observational evidence. In this study, an approach for directly observing the cloud seeding effect is proposed using a 1548 nm coherent Doppler wind lidar (CDWL). Normalized skewness was employed to identify the components of the reflectivity spectrum. The spectrum detection capability of a CDWL was verified by a 24.23-GHz Micro Rain Radar (MRR) in Hefei, China (117°15′ E, 31°50′ N), and different types of lidar spectra were detected and separated, including aerosol, turbulence, cloud droplet, and precipitation. Spectrum analysis was applied as a field experiment performed in Inner Mongolia, China (112°39′ E, 42°21′ N ) to support the cloud seeding operation for the 70th anniversary of China’s national day. The CDWL can monitor the cloud motion and provide windshear and turbulence information ensuring operation safety. The cloud-precipitation process is detected by the CDWL, microwave radiometer (MWR) and Advanced Geosynchronous Radiation Imager (AGRI) in FY4A satellites. In particular, the spectrum width and skewness of seeded cloud show a two-layer structure, which reflects cloud component changes, and it is possibly related to cloud seeding effects. Multi-component spectra are separated into four clusters, which are well distinguished by spectrum width and vertical velocity. In general, our findings provide new evidence that the reflectivity spectrum of CDWL has potential for assessing cloud seeding effects.

11 June 2022 in Remote Sensing
Verified
Journal Article
Open access
PDF file
Jinlong YuanJinlong Yuan
Jinlong Yuan
YWYunbin Wu
Yunbin Wu
Zhifeng ShuZhifeng Shu
Zhifeng Shu
LSLian Su
Lian Su
DTDawei Tang
Dawei Tang
HXHaiyun Xia
Haiyun Xia
The monitoring and tracking of urban air pollution is a challenging environmental issue. The approach of synchronous 3-D detection of wind and pollution using a solo coherent Doppler wind lidar (CDWL) is developed and demonstrated. The 3-D distribution of pollutant is depicted by the backscatter coefficient based on signal intensity of CDWL. Then, a high-resolution wind field is derived to track the local air pollution source with its diffusion and to analyze transboundary air pollution episodes. The approach is experimentally implemented in a chemical industry park. Smoke plumes caused by point source pollutions are captured well using plan position indicator (PPI) scanning with low elevation. A typical source of pollution is located, combining the trajectory of the smoke plume and the horizontal wind vector. In addition, transboundary air pollution caused by the transport of dust storms is detected in a vertical profile scanning pattern, which is consistent with the results of national monitoring stations and backward trajectory models. Our present work provides a significant 3-D detection approach to air pollution monitoring with its sources, paths, and heights by using a solo-CDWL system.

20 January 2025 in Photonics
Verified
Journal Article
Open access
PDF file
FSFahua Shen
Fahua Shen
Zhifeng ShuZhifeng Shu
Zhifeng Shu
JDJihui Dong
Jihui Dong
GJGuohua Jin
Guohua Jin
LYLiangliang Yang
Liangliang Yang
HXHua Xu
Hua Xu
To suppress the influence of aerosols scattering on the double-edge detection technique and achieve high-accuracy measurement of the wind field throughout the troposphere to the lower stratosphere, an ultraviolet 355 nm Rayleigh–Brillouin Doppler lidar technology based on a dual-pass dual Fabry–Perot interferometer (FPI) is proposed. The wind speed detection principle of this technology is analyzed, and the formulas for radial wind speed measurement error caused by random noise and wind speed measurement bias caused by Mie scattering signal contamination are derived. Based on the detection principle, the structure of the lidar system is designed. Combining the wind speed measurement error and measurement bias on both sides, the parameters of the dual-pass dual-FPI are optimized. The free spectral range (FSR) of the dual-pass dual-FPI is selected as 12 GHz, the bandwidth as 1.8 GHz, and the peak-to-peak spacing as 6 GHz. Further, the detection performance of this new type of Rayleigh–Brillouin Doppler lidar with the designed system parameters is simulated and analyzed. The simulation results show that at an altitude of 0–20 km, within the radial wind speed dynamic range of ±50 m/s, the radial wind speed measurement bias caused by aerosol scattering signal is less than 0.17 m/s in the cloudless region; within the radial wind speed dynamic range of ±30 m/s, the bias is less than 0.44 m/s and 0.91 m/s in the simulated cumulus cloud at 4 km where aerosol backscatter ratio Rβ = 3.8 and cirrus cloud at 9 km where Rβ = 2.9, respectively; using a laser with a pulse energy of 350 mJ and a repetition frequency of 50 Hz, a 450 mm aperture telescope, setting the detection zenith angle of 30°, vertical resolution of 26 m@0–10 km, 78 m@10–20 km, and 260 m@20–30 km, and a time resolution of 1 min, with the daytime sky background brightness taking 0.3 WSr−1m−2nm−1@355 nm, the radial wind speed measurement errors of the system during the day and night are below 2.9 m/s and 1.6 m/s, respectively, up to 30 km altitude, below 0.28 m/s at 10 km altitude, and below 0.91 m/s at 20 km altitude all day.

11 February 2025 in Atmosphere
Verified
Journal Article
Open access
PDF file
HWHui Wang
Hui Wang
HYHaifeng Yu
Haifeng Yu
HWHao Wen
Hao Wen
Zhifeng ShuZhifeng Shu
Zhifeng Shu
Lightning rod configuration is crucial in radar stations. With widespread application of dual-polarisation technology, lightning rods have a significant impact on radar differential reflectivity, particularly for X-band radars with shorter wavelengths. Quantitative analyses and methods for reducing the impact of lightning rods on radar data quality have become particularly important. In this study, lightning rods of two different sizes were configured on Beijing’s Fangshan X-band radar to perform antenna far-field tests and precipitation process comparative observation tests, and to conduct a quantitative impact assessment of the antenna electrical performance parameters and radar differential reflectivity. First, far-field tests were conducted on the impact of small- and original-diameter lightning rods on the Fangshan X-band radar. The results showed that the horizontal polarisation beam width was reduced by 0.081 and 0.08°, while the vertical polarisation beam width was reduced by 0.02 and 0.11°, respectively. Second, light rain or snowfall with a signal-to-noise ratio greater than 15 dB, and a correlation coefficient greater than 0.985, were selected for comparative observation. When other environmental influences could not be isolated, the original lightning rod showed a maximum ZDR value of 1.32 dB and a maximum azimuth span of 35°. The maximum ZDR value of the small-diameter lightning rod was 0.18 dB and the maximum azimuth span was 20°; however, its deviation from the theoretical maximum value is only 0.05 dB. Therefore, once the system configuration is determined, the design of an appropriate lightning rod scheme can effectively improve radar data quality.

4 December 2023 in Remote Sensing
Verified
Journal Article
Open access
PDF file
SZShuai Zhang
Shuai Zhang
YCYubao Chen
Yubao Chen
Zhifeng ShuZhifeng Shu
Zhifeng Shu
HYHaifeng Yu
Haifeng Yu
HWHui Wang
Hui Wang
LLLu Li
Lu Li
Parameter estimation is important in weather radar signal processing. Time-domain processing (TDP) and frequency-domain processing (FDP) are two basic parameter estimation methods used in the weather radar field. TDP is widely used in operational weather radars because of its high efficiency and robustness; however, it must be assumed that the received signal has a symmetrical or Gaussian power spectrum, which limits its performance. FDP does not require assumptions about its power spectrum model and has a seamless connection to spectrum analysis; however, its application performance has not been fully validated to ensure its robustness in an operational environment. In this study, we introduce several technical details in FDP, including window function selection, aliasing correction, and noise correction. Additionally, we evaluate the performance of FDP and compare the performance of FDP and TDP based on simulated and measured weather in-phase/quadrature (I/Q) data. The results show that FDP has potential for operational applications; however, further improvements are required, e.g., windowing processing for signals mixed with severe clutter.

16 January 2026 in Remote Sensing
Verified
Journal Article
Open access
PDF file
CLChen Liu
Chen Liu
Zhifeng ShuZhifeng Shu
Zhifeng Shu
LYLu Yang
Lu Yang
HWHui Wang
Hui Wang
CCChang Cao
Chang Cao
SWShenghuan Wen
Shenghuan Wen
Understanding the evolution of the atmospheric boundary layer height (BLH) is essential for characterizing air–surface exchange and air pollution processes. This study investigates the consistency and applicability of three BLH retrieval methods based on multi-source remote sensing observations at Beijing Southern Suburb station during autumn–winter 2023. Using Doppler wind lidar (DWL) and microwave radiometer (MWR) data, the Haar wavelet covariance transform (HWCT), vertical velocity variance (Var), and parcel methods were applied, and 10 min averages were used to suppress short-term fluctuations. Statistical analysis shows good overall consistency among the methods, with the strongest correlation between HWCT and Var method (R = 0.62) and average systematic positive bias of 0.4–0.6 km for the parcel method. Case studies under clear-sky, cloudy, and hazy conditions reveal distinct responses: HWCT effectively captures aerosol gradients but fails under cloud contamination, the Var method reflects turbulent dynamics and requires adaptive thresholds, and the Parcel method robustly describes thermodynamic evolution. The results demonstrate that the three methods are complementary in capturing the material, dynamic, and thermodynamic characteristics of the boundary layer, providing a comprehensive framework for evaluating BLH variability and improving multi-sensor retrievals under diverse meteorological conditions.