Weather radar is an active remote sensing device used to monitor the full lifecycle changes in severe convective weather with high spatial and temporal resolution. Effective radar calibration is a crucial foundation for ensuring the high-quality application of observational data. This paper utilizes a UAV platform equipped with a high-precision RTK system and standard metal spheres to study the principles and methods of metal sphere calibration, constructing a complete calibration process and calibration accuracy evaluation metrics. Additionally, a collocated radar comparison observation experiment was conducted for cross-validation, and metal sphere calibration tests were performed on problematic radars. The experimental results indicate the following: (1) The combined application of a high-precision RTK system and a laser range camera can provide real-time position information on the metal sphere, improving the efficiency of radar target acquisition. (2) The calibration method based on UAV-suspended metal spheres can periodically conduct the quantitative calibration of Z and Z_DR, achieving calibration accuracies within 0.5 dB and 0.2 dB, respectively, and supports the qualitative inspection of key parameters such as beamwidth and pulse width. (3) During field tests, a high success rate “coarse adjustment + fine adjustment + staring” sphere-finding technique was established, based on automatic switching between RHI, PPI, and FIX scanning modes. This method directs the UAV to adjust the metal sphere to the center of the radar distance bin, reducing the impact of uneven beam filling and bin crossing, ensuring the accuracy of scattering characteristic measurements.

Lightning rod configuration is crucial in radar stations. With widespread application of dual-polarisation technology, lightning rods have a significant impact on radar differential reflectivity, particularly for X-band radars with shorter wavelengths. Quantitative analyses and methods for reducing the impact of lightning rods on radar data quality have become particularly important. In this study, lightning rods of two different sizes were configured on Beijing’s Fangshan X-band radar to perform antenna far-field tests and precipitation process comparative observation tests, and to conduct a quantitative impact assessment of the antenna electrical performance parameters and radar differential reflectivity. First, far-field tests were conducted on the impact of small- and original-diameter lightning rods on the Fangshan X-band radar. The results showed that the horizontal polarisation beam width was reduced by 0.081 and 0.08°, while the vertical polarisation beam width was reduced by 0.02 and 0.11°, respectively. Second, light rain or snowfall with a signal-to-noise ratio greater than 15 dB, and a correlation coefficient greater than 0.985, were selected for comparative observation. When other environmental influences could not be isolated, the original lightning rod showed a maximum ZDR value of 1.32 dB and a maximum azimuth span of 35°. The maximum ZDR value of the small-diameter lightning rod was 0.18 dB and the maximum azimuth span was 20°; however, its deviation from the theoretical maximum value is only 0.05 dB. Therefore, once the system configuration is determined, the design of an appropriate lightning rod scheme can effectively improve radar data quality.

Lightning rods, while essential for protecting weather radars from direct lightning strikes, act as persistent non-meteorological scatterers that can interfere with signal transmission and reception and thereby degrade detection accuracy and product quality. Existing studies have mainly focused on X-band and C-band systems, and robust, measurement-based quantitative assessments for S-band dual-polarization radars remain scarce. In this study, a controllable tilting lightning rod, a high-precision Far-field Antenna Measurement System (FAMS), and an S-band dual-polarization weather radar (SAD radar) are jointly employed to systematically quantify lightning-rod impacts on antenna electromagnetic parameters under different rod elevation angles and azimuth configurations. Typical precipitation events were analyzed to evaluate the influence of the lightning rods on dual-polarization parameters. The results show that the lightning rod substantially elevates sidelobe levels, with a maximum enhancement of 4.55 dB, while producing only limited changes in the antenna main-beam azimuth and beamwidth. Differential reflectivity ($Z_{DR}$) is the most sensitive polarimetric parameter, exhibiting a persistent positive bias of about 0.24–0.25 dB in snowfall and mixed-phase precipitation, while no persistent azimuthal anomaly is evident during freezing rain; the co-polar correlation coefficient (${\rho }_{hv}$) is only marginally affected. Collectively, these results provide quantitative, far-field evidence of lightning-rod interference in S-band dual-polarization radars and provide practical guidance for more reasonable lightning-rod placement and configuration, as well as useful references for $Z_{DR}$-oriented polarimetric quality-control and correction strategies.

Parameter estimation is important in weather radar signal processing. Time-domain processing (TDP) and frequency-domain processing (FDP) are two basic parameter estimation methods used in the weather radar field. TDP is widely used in operational weather radars because of its high efficiency and robustness; however, it must be assumed that the received signal has a symmetrical or Gaussian power spectrum, which limits its performance. FDP does not require assumptions about its power spectrum model and has a seamless connection to spectrum analysis; however, its application performance has not been fully validated to ensure its robustness in an operational environment. In this study, we introduce several technical details in FDP, including window function selection, aliasing correction, and noise correction. Additionally, we evaluate the performance of FDP and compare the performance of FDP and TDP based on simulated and measured weather in-phase/quadrature (I/Q) data. The results show that FDP has potential for operational applications; however, further improvements are required, e.g., windowing processing for signals mixed with severe clutter.