This paper reviews research on vehicle driving state estimation research. Based on the discussion of the importance, development history, and application fields of this topic of research, it focuses on analyzing vehicle state estimation techniques from different perspectives, namely (1) from the perspective of the estimation objects, including vehicle attitude and driving state estimations, chassis component key dynamic parameter estimations, and vehicle driving environment state estimations; (2) from the perspective of vehicle characteristics, including vehicle dynamics coupling characteristics, vehicle multi-source information redundancy characteristics, and vehicle state transition characteristics; (3) from the perspective of key estimation algorithms, including model-based Kalman filtering algorithms, data-driven machine learning algorithms, and optimization estimation algorithms combining mechanism-based and data-driven approaches. This manuscript helps interested readers to comprehensively understand the research progress, technical features, and future trends of vehicle state estimation technology from the perspective of overall architecture and subdomains.
Permanent magnet synchronous motors (PMSMs) have been widespread used in high-performance automation due to their superior control precision and energy efficiency. With the development of digital processors, deadbeat predictive control (DPC) has promising control strategy for PMSM drive systems. However, the performance of DPC is highly sensitive to inaccuracies in system parameters, while the system delay and total harmonic distortion can also significantly affect its control effectiveness. This paper presents a comprehensive review of the advantages of DPC strategies applied to PMSMs, as well as their limitations in practical applications. Several improvement approaches are also discussed, including parameter identification methods, robust control methods, and delay compensation methods. Finally, the paper explores future research trends in this field, highlighting potential directions for the development of predictive control in PMSM drive systems.
Shark skin grooves, known to reduce hydrodynamic drag, have inspired riblet structures for flow control. This study investigates their application to airfoils, where flow separation at high angles of attack (AOA) compromises aerodynamic stability and wind turbine performance. Numerical simulations were conducted using the SST k–ω model in ANSYS Fluent to analyze riblets placed on the suction surface (SS) of an airfoil. The riblets—oriented perpendicular to the flow—have a fixed height and width of 1 mm, with total lengths varying from 0.1, 0.2, 0.5, and 0.7 of the chord length. The influence of riblet geometry on trailing-edge (TE) vortex shedding and drag reduction under stall conditions is examined in detail. The results indicate that appropriately sized riblets suppress secondary vortex formation and extend the 2S vortex-shedding regime. Conversely, poorly dimensioned riblets can advance Hopf bifurcation in the wake. Analysis of the transient boundary layer structure reveals that the suppression of vortex shedding is primarily due to riblets attenuating fluid pulsation and Reynolds stresses caused by turbulent bursts.