Tomographic imaging of catalysts allows non‐invasive investigation of structural features and chemical properties by combining large fields of view, high spatial resolution, and the ability to probe multiple length scales. Three complementary nanotomography techniques, (i) electron tomography, (ii) focused ion beam—scanning electron microscopy, and (iii) synchrotron ptychographic X‐ray computed tomography, were applied to render the 3D structure of monolithic nanoporous gold doped with ceria, a catalytically active material with hierarchical porosity on the nm and μm scale. The resulting tomograms were used to directly measure volume fraction, surface area and pore size distribution, together with 3D pore network mapping. Each technique is critically assessed in terms of approximate spatial resolution, field of view, sample preparation and data processing requirements. Ptychographic X‐ray computed tomography produced 3D electron density maps with isotropic spatial resolution of 23 nm, the highest so far demonstrated for a catalyst material, and is highlighted as an emerging method with excellent potential in the field of catalysis.
In solution processed electronic devices it is crucial that the deposited inks are properly aligned and that all post‐processing steps are compliant with each other. Moreover, shorter channel lengths are highly beneficial to increase the device performance. Herein, laser printing of metals and polymer reservoirs allows to print sub‐micrometer sized channel lengths while confining functional inks into these small gaps. Therefore, a manufacturing concept and optimized material stack, suitable for combined inkjet and laser printing are proposed. A nanoparticulate indium oxide (In2O3) semiconductor is inkjet printed into and constrained by a 3D laser written polymer (pentaerythritol triacrylate, PETA) reservoir. Inside the 3D printed polymer reservoir, platinum (Pt) electrodes, that are further routed over the reservoir walls, are laser printed by a metal reduction process. The transistor fabrication is completed by a second inkjet printed layer of composite solid polymer electrolyte and an organic top‐gate layer (PEDOT:PSS). This concept does not exceed annealing temperatures higher than 100 °C, and is compatible with a range of substrates. The characterized electrolyte‐gated field‐effect transistor show a reasonable on/off‐ratio in the range of 104 with negligible leakage currents. This materials and hybrid device manufacturing scheme has believed great potential for bioelectronics, lab‐on‐a‐chip applications and others.