Jun Zhang

Jun Zhang


Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 November 2024 in Energies
Verified
Journal Article
Open access
PDF file
DBDaorina Bao
Daorina Bao
ZSZhongyu Shi
Zhongyu Shi
JZJun Zhang
Jun Zhang
AJAoxiang Jiang
Aoxiang Jiang
QHQingsong Han
Qingsong Han
SZShaohua Zhang
Shaohua Zhang
This paper introduces a novel pitch adjustment device applicable to small wind turbines. To validate its feasibility under high wind speeds and analyze the impact of pitch angle on the power output characteristics of small wind turbines, a prototype model was manufactured for wind tunnel experiments. Additionally, we conducted simulations to analyze the stress and displacement responses of key components under uniform airflow, shear airflow, and Extreme Operated Gust conditions. The numerical simulation results were compared with experimental results based on actual measurement points in the wind tunnel experiment, demonstrating that the simulation data accurately reflect the experimental test results, with an overall discrepancy of around 10%, thereby validating the accuracy of the load and constraint settings in the transient dynamics analysis. This study found that, as the pitch angle increased, the structural dynamic response of key wind turbine components under uniform airflow conditions exhibited a decreasing trend, which was proportional to wind speed. Under shear airflow conditions, the response of key components was positively correlated with the shear index, while Extreme Operated Gust significantly increased the amplitude of the response fluctuations. Furthermore, this research revealed that, with an increase in pitch angle, the maximum stress value of the gear under uniform airflow conditions decreased from 27.42 MPa to 7.64 MPa, a reduction of 72.1%. Under shear airflow conditions, the root stress of the gear decreased from 14.441 MPa to 8.879 MPa, a reduction of 49.60%. Under Extreme Operated Gust conditions, the maximum stress of the gear decreased from 17.82 MPa to 15.18 MPa, a reduction of 22.99%.

23 April 2026 in Energies
Verified
Journal Article
Open access
PDF file
DBDaorina Bao
Daorina Bao
PLPeng Li
Peng Li
JZJun Zhang
Jun Zhang
ZSZhongyu Shi
Zhongyu Shi
YLYongshui Luo
Yongshui Luo
XGXiaodong Guo
Xiaodong Guo
Under turbulent wind conditions, rapid wind speed fluctuations can markedly increase the fatigue loads borne by wind turbine blades and towers. In practice, conventional PID pitch control based on speed feedback often struggles to deliver satisfactory load mitigation, mainly because the wind turbine system is highly nonlinear, strongly coupled, and subject to time-delay effects. To overcome these limitations, this paper proposes a load-predictive pitch control strategy built on a Long Short-Term Memory (LSTM) network. Specifically, the LSTM model is first employed to predict the hub-fixed tilt and yaw moments ahead of time. These predicted values are then introduced as feedforward signals and combined with the conventional speed-based pitch control signal as well as a proportional feedback term. After that, the inverse Coleman transformation is used to generate the individual pitch commands for each blade. To verify the effectiveness of the proposed method, co-simulations were carried out in FAST and MATLAB/Simulink on a 5000 KW distributed pitch-controlled wind turbine under IEC Kaimal spectrum wind conditions, with a mean wind speed of 18 m/s and Class B turbulence intensity. The results show that the LSTM prediction model achieves an R² of 0.998 on the test dataset, with an RMSE as low as 0.0051. Compared with the conventional pitch-based power control strategy, the proposed approach maintains the same average power output while significantly reducing fatigue loads, thereby contributing to a longer service life for the wind turbine.