Daorina Bao

Prof. Dr. Daorina Bao


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 December 2023 in Energies
Verified
Journal Article
Open access
PDF file
YLyuanyuan Li
yuanyuan Li
XXXu Xiaoyu
Xu Xiaoyu
DBDaorina Bao
Daorina Bao
BRBakhramzhan Rasakhodzhaev Rasakhodzhaev
Bakhramzhan Rasakhodzhaev Rasakhodzhaev
AJAkhadov Jobir
Akhadov Jobir
Zhao MingzhiZhao Mingzhi
Zhao Mingzhi
Solar hydrogen production technology is a key technology for building a clean, low-carbon, safe, and efficient energy system. At present, the intermittency and volatility of renewable energy have caused a lot of “wind and light”. By combining renewable energy with electrolytic water technology to produce high-purity hydrogen and oxygen, which can be converted into electricity, the utilization rate of renewable energy can be effectively improved, while helping to improve the solar hydrogen production system. This paper summarizes and analyzes the research status and development direction of solar hydrogen production technology from three aspects. Energy supply mode: the role of solar PV systems and PT systems in this technology is analyzed. System control: the key technology and system structure of different types of electrolytic cells are introduced in detail. System economy: the economy and improvement measures of electrolytic cells are analyzed from the perspectives of cost, consumption, efficiency, and durability. Finally, the development prospects of solar hydrogen production systems in China are summarized and anticipated. This article reviews the current research status of photovoltaic-photothermal coupled electrolysis cell systems, fills the current research gap, and provides theoretical reference for the further development of solar hydrogen production systems.

4 December 2023 in Energies
Verified
Journal Article
Open access
PDF file
Zhao MingzhiZhao Mingzhi
Zhao Mingzhi
1Y1 Yu
1 Yu
Chun ChangChun Chang
Chun Chang
DBDaorina Bao
Daorina Bao
AMAohan Mei
Aohan Mei
NWNingbo Wang
Ningbo Wang
Photovoltaic power generation is rapidly developing as a kind of renewable energy that can protect the ecological environment. The establishment of photovoltaic power stations in desertification areas can play a very important role in desert windbreaks and sand fixation as well as improve the ecological environment. The realization of the effective integration of photovoltaics and deserts can have multiple benefits for the economy, society, and ecology. However, the deposition of sand and dust caused by environmental factors in desertification areas can seriously affect the power generation efficiency of PV modules. In this study, the output characteristics of photovoltaic modules were tested under three wind speed conditions (5 m/s, 10 m/s, and 15 m/s), with different sand densities, sand particle sizes, and inclination angles. The experimental study showed that the module’s output power gradually decreased with an increase in the density of accumulated sand; the sand accumulation density on the surface of the photovoltaic module increased from 0 to 40 g/m2, and the maximum output power decreased by 32.2%. As the sand particle size increased, the maximum output power of the module rose and was gradually stabilized in the three wind speed groups. As the sand particle size increased, the maximum output power of the module increased and gradually stabilized in the three wind speed groups. When the wind speed was 15 m/s, the component output power of the angle had the largest drop; the tilt angle was 60° when the relative output power rate reached the minimum (i.e., 86.5%); that is, there was electrical energy loss of approximately 13.7%. The sand particle size and accumulated sand density were the control variables related to the module temperature and the transmittance of the proportion of the impact of the module filling factor differences. According to the curve analysis of the filling factor in different sand accumulation densities, the filling factor first increased and then decreased. In this test, the filling factor at the sand accumulation density of 35 g/m2 (module temperature valley) reached the peak value. The change trend for the component filling factor under different sand particle sizes fluctuated.

20 August 2023 in Buildings
Verified
Journal Article
Open access
PDF file
YDYanqiang Di
Yanqiang Di
CZChen Zhao
Chen Zhao
XLXueli Lian
Xueli Lian
XLXiaolong Li
Xiaolong Li
DBDaorina Bao
Daorina Bao
JLJinxing Liu
Jinxing Liu
Low air temperature and frosting have been reported as the critical factors that greatly attenuate the efficiency and performance of the ASHP in cold regions. In order to ensure the potential prevalence of the ASHP in cold regions of China, a new ultra-low temperature ASHP unit was developed, and the field measurement was carried out in an office building where these ASHP units were installed in Shanxi Province. Results showed that a coefficient of performance (COP) of 1.83 was obtained at the ultra-low environmental temperature of −25 °C. Meanwhile, measured results indicated significant frosting suppression and improved heating performance under three typical frosting conditions. In addition, long-term measurement results revealed that the mean COP and COPsys reached up to 3.34 and 2.63, respectively, indicating a higher performance in the cold regions of China. Consequently, the corresponding CO2 emission reached 11.3 kg per year and per square meter, and the annual total cost on the unit reduced by 15.8% compared with the conventional ASHP, which meant that the total investment could be covered in the second year. The reduced CO2 emission and the annual cost implied that the ASHP unit could produce better environmental and economic benefits. Findings of this study revealed that this ultra-low temperature ASHP unit had a better performance under cold environment, which offered a possibility for the prevailing of the ASHP in cold or extremely cold regions, as well as could contribute to the carbon peaking and neutralization.

15 August 2024 in Energies
Verified
Journal Article
Open access
PDF file
DBDaorina Bao
Daorina Bao
AJAoxiang Jiang
Aoxiang Jiang
CLChengze Li
Chengze Li
ZSZhongyu Shi
Zhongyu Shi
QHQingsong Han
Qingsong Han
SZShaohua Zhang
Shaohua Zhang
To ensure the safe and stable operation of small and medium-sized wind turbine generators within distributed energy systems, a new active pitch adjustment method for a 1.5 kW distributed pitch wind turbine generator is proposed in this article. The stress and displacement responses of blades under uniform inflow and extreme operating gust inflow conditions were calculated and analyzed using a two-way fluid–structure coupling method. The results showed that under the two different flow conditions, as the pitch angle increased, the stress and displacement responses of the wind turbine blades both significantly decreased, and the decrease was greater with increasing wind speed. The feasibility of the proposed variable-pitch adjustment for blade load reduction under different inflow conditions was further illustrated. The peak of the blade stress response was located at the leading-edge position in the middle of the blades (0.55R) for the different inflow conditions, while the displacement response of the blades was mainly along the waving direction. Through comparative analysis of the blade stress and displacement responses at the same wind speed under different flow conditions, it was found that the maximum mean ratio of the blade displacement and stress responses reached 1.66 and 1.67, respectively.

19 September 2023 in Energies
Verified
Journal Article
Open access
PDF file
PWPeng Wang
Peng Wang
DBDaorina Bao
Daorina Bao
MZMingzhi Zhao
Mingzhi Zhao
ZSZhongyu Shi
Zhongyu Shi
FGFan Gao
Fan Gao
FHFeng Han
Feng Han
This article proposes and designs a novel variable pitch adjustment device for small wind turbines. The generator spindle is designed to be hollow so that the drive rod passes through it and connects the pitch drive mechanism to the pitch actuator. The article introduces the basic structure and working principle of the pitch mechanism and verifies the feasibility of the pitch device by using 3D printing technology to produce a small-scale model. The stress analysis of the wind turbine was carried out using the unidirectional fluid–structure coupling method. The results show that the maximum equivalent stress of the pitch mechanism is 27.42 MPa, the maximum tooth surface contact stress of the gear is 38.40 MPa, and the maximum tooth root bending stress is 18.13 MPa. The rack synchronous disk, blade handle, and gear rack mechanism were designed with light weight using various optimization schemes. The results of the optimization showed that the overall mass of the pitch mechanism was reduced by 33.2%, improving the applicability of the new pitch mechanism.

7 November 2023 in Preprints.org
Verified
Preprint
Open access
PDF file
Zhao MingzhiZhao Mingzhi
Zhao Mingzhi
RYRong Yu
Rong Yu
Chun ChangChun Chang
Chun Chang
DBDaorina Bao
Daorina Bao
AMAohan Mei
Aohan Mei
NWNingbo Wang
Ningbo Wang
In the natural environment, sand accumulation and desertification can influence the efficiency of photovoltaic arrays. In this study, PV module output characteristics were examined under different sand particle size, varying sand densities and inclination angles, and at wind speeds of 5m/s, 10m/s, and 15m/s. Both theoretical and experimental results showed that the output power of the module declines with increasing sand density. As the sand particle size increases, the module maximum output power rises and then stabilizes. The two control variables, namely sand density and sand particle size, influence the module temperature and light transmittance distinctly. Contrary to the impact of sand density on the module filling factor curve, the module filling factor exhibits varying trends under different sand particle sizes. Additionally, the pattern of the module filling factor as a function of sand density contrasts with that of the module temperature under analogous conditions. Specifically, when the sand density on the PV module surface increases from 0 to 40g/m², there is a 32.2% reduction in maximum output power. At a wind speed of 15m/s, this reduction was found consistent across all wind speed categories. Furthermore, the trend of the module filling factor rel-ative to sand accumulation density contrasts with the module temperature trend under analogous conditions. Notably, the filling factor reached its apex at a sand accumulation density of 35g/m², which corresponded to the module temperature's nadir during the experiment.