The current work presents the first experimental demonstration of real-time Ethernet (ETH) trial services and 4K-Ultra High Definition (UHD) video application transmission over a 2λ Wavelength Division Multiplexing (WDM) analog Fiber-Wireless (FiWi) mmWave X-haul network, supporting dynamic flexible capacity allocation through an integrated silicon photonic Si ₃ N ₄ Reconfigurable Optical Add Drop Multiplexer (ROADM) and 60 GHz wireless transmission across a 7 m V-band link distance, while controlled by a Software Defined Network (SDN) controller based on Open Daylight. Analog X-haul transport of the radio signals is based on an Intermediate Frequency over Fiber (IFoF) scheme centered at 1.5 GHz using an Orthogonal Frequency Division Multiplexing (OFDM) radio-waveform with a bandwidth of 204 MHz, generated by a Field Programmable Gated Array (FPGA)-based RF System-on-Chip (SoC) processor that converts on-the-fly the real-time ETH downlink traffic to analog radio and vice-versa for the uplink. Dynamic allocation of the X-haul traffic capacity is handled through the use of the 802.1Q Virtual Local Area Network (VLAN) tag-mechanism, which controls the forwarding operation to the proper DAC and InP EML for optical modulation using Intensity Modulation/Direct Detection (IM/DD) schemes, while the wavelength routing operation is handled by the low-loss four-port Si ₃ N ₄ ROADM featuring only 2.5 dB fiber-to-fiber losses based on a cascaded MZI-interleaver design on the TriPleX platform, routing the real-time traffic to a second mmWave antenna site. Detailed measurements and traffic statistics indicate end-to-end latency of less than 260 μs and a packet loss less than 0.0054% across a dynamic range of at least 6.5 dB in the optical domain, while the high user bandwidth and signal quality are validated by an uninterrupted 4K-UHD video transmission across the FiWi X-haul mmWave transport network. The current work aims to shape a complete technology roadmap for Point-to-Multipoint FiWi transport network architectures with high spectral efficiency X-haul transport for dense areas and 5G/6G hotspots of future mmWave Centralized Radio Access Networks (C-RANs).

Analog fronthauling is currently promoted as a bandwidth and energy-efficient solution that can meet the requirements of the Fifth Generation (5G) vision for low latency, high data rates and energy efficiency. In this paper, we propose an analog optical fronthaul 5G architecture, fully aligned with the emerging Centralized-Radio Access Network (C-RAN) concept. The proposed architecture exploits the wavelength division multiplexing (WDM) technique and multicarrier intermediate-frequency-over-fiber (IFoF) signal generation per wavelength in order to satisfy the demanding needs of hotspot areas. Particularly, the fronthaul link employs photonic integrated circuit (PIC)-based WDM optical transmitters (Txs) at the baseband unit (BBU), while novel reconfigurable optical add-drop multiplexers (ROADMs) cascaded in an optical bus are used at the remote radio head (RRH) site, to facilitate reconfigurable wavelength switching functionalities up to 4 wavelengths. An aggregate capacity of 96 Gb/s has been reported by exploiting two WDM links carrying multi-IF band orthogonal frequency division multiplexing (OFDM) signals at a baud rate of 0.5 Gbd with sub-carrier (SC) modulation of 64-QAM. All signals exhibited error vector magnitude (EVM) values within the acceptable 3rd Generation Partnership Project (3GPP) limits of 8%. The longest reach to place the BBU away from the hotspot was also investigated, revealing acceptable EVM performance for fiber lengths up to 4.8 km.

In order to meet the ever-increasing traffic demands, the combination of fiber and Millimeter Wave (mmWave) is expected to play a key role for 5G Centralized-Radio Access Networks (C-RANs). Due to the inefficiency of the Common Public Radio Interface for the Baseband Unit (BBU)-Remote Radio Head (RRH) communication, analog-Radio-over-Fiber (a-RoF) technology is considered a promising solution, mainly due to the RRH simplification and lower fronthaul requirements it imposes. In such mmWave a-RoF C-RANs, efficient Medium Transparent-Medium Access Control (MT-MAC) protocols are needed able to meet the challenging 5G requirements. To this end, in this paper, we propose a gated service MT-MAC protocol which authorizes each user to transmit the amount of data it requested. A detailed delay model is proposed, which is validated through simulations for different fiber lengths, network load conditions and number of available optical wavelengths. Moreover, the proposed protocol is compared with the state-of-the-art (SoA) and is shown to achieve up to 20 times higher throughput, 2 times lower delay with 100% lower blocking probability and 5 times higher data wavelength utilization, while being able to adapt to varying network traffic conditions. Our proposal also attains sub-ms latency in most cases, constituting it a promising candidate for next generation mmWave a-RoF C-RANs.

We study the problem of downlink Coordinated Beamforming for dense fixed-wireless millimeter wave (mmWave) networks under a Centralized/Cloud Radio Access Network (C-RAN) setting. To compensate for the increased mmWave path loss, we consider directional transmissions via antenna array analog beamforming, which leads to a discrete set of available beams. We apply the Lyapunov optimization framework to propose a throughput-optimal policy which explicitly accounts for stochastic traffic and channel fluctuations and dynamically performs joint Base Station-to-user association and analog beam selection. Our model makes minimal assumptions and considers realistic mmWave antenna radiation patterns, while it can be easily extended to include additional MAC and PHY layer controls. Since this flexibility comes at the cost of high computational complexity, we also propose two heuristic policies offering reduced complexity. Their performance is compared against a baseline Round-Robin (RR)-based policy, while a theoretical worst-case performance bound is derived. Extensive simulations show the optimal Lyapunov policy achieving a stable throughput increase of more than 2X per user compared to the RR policy, while the proposed heuristics incur only a 20-30% performance penalty with respect to the optimal Lyapunov policy with 60X-900X computational time savings.

In order to cope with the ever-increasing traffic demands and stringent latency constraints, next generation, i.e., sixth generation (6G) networks, are expected to leverage Network Function Virtualization (NFV) as an enabler for enhanced network flexibility. In such a setup, in addition to the traditional problems of user association and traffic routing, Virtual Network Function (VNF) placement needs to be jointly considered. To that end, in this paper, we focus on the joint network and computational resource allocation, targeting low network power consumption while satisfying the Service Function Chain (SFC), throughput, and delay requirements. Unlike the State-of-the-Art (SoA), we also take into account the Access Network (AN), while formulating the problem as a general Mixed Integer Linear Program (MILP). Due to the high complexity of the proposed optimal solution, we also propose a low-complexity energy-efficient resource allocation algorithm, which was shown to significantly outperform the SoA, by achieving up to 78% of the optimal energy efficiency with up to 742 times lower complexity. Finally, we describe an Orchestration Framework for the automated orchestration of vertical-driven services in Network Slices and describe how it encompasses the proposed algorithm towards optimized provisioning of heterogeneous computation and network resources across multiple network segments.