Accurate measurement of pedaling kinetics and kinematics is vital for optimizing rehabilitation, exercise training, and understanding musculoskeletal biomechanics. Pedal reaction force, the main external force in cycling, is essential for musculoskeletal modeling and closely correlates with lower-limb muscle activity and joint reaction forces. However, sensor instrumentation like 3-axis pedal force sensors is costly and requires extensive postprocessing. Recent advancements in machine learning (ML), particularly neural network (NN) models, provide promising solutions for kinetic analyses. In this study, an NN model was developed to predict radial and mediolateral forces, providing a low-cost solution to study pedaling biomechanics with stationary cycling ergometers. Fifteen healthy individuals performed a 2 min pedaling task at two different self-selected (58 ± 5 RPM) and higher (72 ± 7 RPM) cadences. Pedal forces were recorded using a 3-axis force system. The dataset included pedal force, crank angle, cadence, power, and participants’ weight and height. The NN model achieved an inter-subject normalized root mean square error (nRMSE) of 0.15 ± 0.02 and 0.26 ± 0.05 for radial and mediolateral forces at high cadence, respectively, and 0.20 ± 0.04 and 0.22 ± 0.04 at self-selected cadence. The NN model’s low computational time suits real-time pedal force predictions, matching the accuracy of previous ML algorithms for estimating ground reaction forces in gait.
Cycling-based rehabilitation is a non-invasive intervention for individuals with lower limb asymmetries. However, current cycling devices lack comprehensive biomechanical feedback and cannot assess asymmetry. Our lab has developed a novel cycle ergometer equipped with three-dimensional force pedals, a seat post and handlebar force sensors, which allow for a comprehensive analysis of asymmetry across a fatiguing task. This study assessed the reproducibility of the cycling kinetics and asymmetry index derived from this device during incremental and constant load cycling tasks to volitional failure. Eighteen participants completed incremental and constant-load tests, each across two identical sessions. Pedal forces and power were analyzed for each leg individually, and handlebar forces and seat post mediolateral sway were recorded during cycling. Normalized symmetry index (NSI), a metric quantifying the degree of asymmetry between limbs, was calculated for each variable. The reproducibility of the device was assessed using repeated measures analysis of variance and intraclass correlation coefficients (ICC). No significant session or interaction effects were found for pedal, handlebar, and seat post measures (all p > 0.05). Time effects were observed for pedal force and power in the incremental test (all p < 0.001). NSI values were reproducible with high ICC values (≥0.70) for force and power. The results suggest that this ergometer offers reproducible cycling kinetics and asymmetry measures across a fatiguing task. The findings support the application of this ergometer in research and rehabilitation settings.
Accurate measurement of pedaling kinetics and kinematics is vital for optimizing rehabilitation, exercise training, and understanding musculoskeletal biomechanics. Pedal reaction force, the main external force in cycling, is essential for musculoskeletal modeling and closely correlates with lower limb muscle activity and joint reaction forces. However, sensor instrumentation like 3-axis pedal force sensors is costly and requires extensive post-processing. Recent advancements in machine learning (ML), particularly neural network (NN) models, provide promising solutions for kinetic analyses. In this study, an NN model was developed to predict radial and mediolateral forces, providing a low-cost solution to study pedaling biomechanics with stationary cycling ergometers. Fifteen healthy individuals performed a 2-minute pedaling task at two different self-selected (58±5 rpm) and higher (72±7 rpm) cadences. Pedal forces were recorded using a 3-axis force system. The dataset included pedal force, crank angle, cadence, power, and participants' weight and height. The NN model achieved an inter-subject normalized root mean square error (nRMSE) of 0.15±0.02 and 0.26±0.05 for radial and mediolateral forces at high cadence, respectively, and 0.20±0.04 and 0.22±0.04 at self-selected cadence. The NN model's low computational time suits real-time pedal force predictions, matching the accuracy of previous ML algorithms for estimating ground reaction forces in gait.
Asymmetry, defined as unequal neuromuscular activation or mechanical performance between contralateral limbs, plays a critical role in cycling efficiency and injury risk. While kinematic and kinetic measures are commonly used to assess asymmetry, surface electromyography (EMG) signals offer an additional perspective on neuromuscular asymmetry. This study evaluated muscle activation asymmetry during cycling using the Normalized Symmetry Index (NSI), a metric that quantifies differences in kinematics and kinetics between limbs, where higher values indicate greater asymmetry. NSI was calculated from EMG recordings of seven lower-limb muscles under two test conditions: step incremental and constant-power cycling to task failure. Twenty recreationally active participants performed both tests on a stationary ergometer while EMG data were collected bilaterally. Step incremental cycling resulted in a significant reduction in NSI for key muscles in the quadriceps group: vastus medialis (from 44% to 21%, p < 0.001), vastus lateralis (from 45% to 22%, p = 0.002), rectus femoris (from 54% to 24%, p < 0.001), and biceps femoris (from 52% to 29%, p = 0.003). No significant changes were observed for the tibialis anterior, soleus, or gastrocnemius medialis. In contrast, under constant-power conditions, NSI values remained unchanged over time for all muscles (all p > 0.05), with average NSI values ranging from 12% to 30%, indicating consistent bilateral activation. These findings highlight the sensitivity of surface EMG in detecting workload-dependent changes in muscle activation asymmetry and suggest that higher cycling intensities, compared to lower ones, may promote more balanced engagement of primary cycling muscles.
Asymmetry in cycling may reduce mechanical efficiency and increase the risk of overuse injuries, particularly as fatigue develops. While asymmetry is often assessed using global power output, analyzing directional force components may reveal biomechanical patterns more relevant to performance and injury. In this study, we investigated the effect of progressive fatigue on bilateral asymmetry in power and pedal force components during a submaximal constant-power cycling test. Twenty healthy recreational participants performed prolonged cycling at 70% of their individual peak power until exhaustion while three-dimensional pedal forces were recorded using an instrumented ergometer. Asymmetry was quantified using the Normalized Symmetry Index (NSI) for power and for tangential, radial, and mediolateral force components, and evaluated at five time points representing progressive fatigue. Fatigue did not significantly alter mean relative interlimb asymmetry in power output or pedal force components as quantified by NSI, nor did it significantly change mean absolute interlimb force or power differences. However, cycle-to-cycle variability of the asymmetry measures and absolute interlimb differences changed across time, suggesting that fatigue influenced variability in limb coordination rather than producing a systematic shift in mean left-right force sharing. Asymmetry also differed significantly between force directions, with mediolateral forces showing the largest NSI range (-10% to 8%) compared to radial (-3% to 6%) and tangential (-7% to 3%) forces. These findings suggest that, in healthy individuals performing seated constant-power cycling, fatigue-related changes may be expressed more strongly through variability and direction-specific force behavior than through systematic changes in mean relative or absolute interlimb asymmetry.