Xuehao He

Dr. Xuehao He


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 December 2021 in ACS Omega
Verified
Journal Article
Open access
XHXuehao He
Xuehao He
ZYZhiwen Yu
Zhiwen Yu
YGYujiong Gu
Yujiong Gu
ZZZiliang Zhao
Ziliang Zhao
LZLei Zheng
Lei Zheng
SLShuyin Lu
Shuyin Lu
A screw expander-based heating system is proposed based on a 330 MW combined heat and power unit to recover the extraction steam pressure energy. EBSILON Professional software was applied to model the proposed system, and the thermal performance of the traditional system and the new system was compared under different operating conditions. The results show that under the designed heating condition, the standard coal consumption rate of the new system is reduced by 4.74 g/kWh, and the exergy efficiency of the heating process is increased by 17.29%. When the extraction steam pressure changes with the load within a range greater than 0.1 MPa, there is an optimal operating range for the new system, which is related to the built-in pressure ratio of the screw expander and the extraction steam pressure difference, and the distribution of the optimal operating range varies with the supply-water temperature. The heating process exergy efficiency of the two systems shows opposite trends under off-design conditions. Additionally, under the condition of meeting the extraction steam pressure, the method for increasing the output power of the screw expander by adjusting the butterfly valve to increase the extraction steam pressure only increases the standard coal consumption rate of the system. Furthermore, through an application case study, the annual economic benefit of the new system is expected to be ¥ 4.15 million, and the payback period is 5.02 years.

30 September 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
WZWenjie Zhu
Wenjie Zhu
FHfaping hu
faping hu
XHXuehao He
Xuehao He
Luping DongLuping Dong
Luping Dong
HYHaixinYv Yv
HaixinYv Yv
HTHai Tian
Hai Tian
Detecting small split pins on transmission lines poses significant challenges, including low accuracy in complex backgrounds and slow inference speeds. To address these limitations, this study proposes a novel two-stage collaborative detection framework. The first stage utilizes a Yolo11x-based model to localize and crop components containing split pins from high-resolution images. This procedure transforms the difficult small-object detection problem into a more manageable, conventional detection task on a simplified background. For the second stage, a new high-performance detector, Mamba-YOLO-SPDC, is introduced. This model enhances the Yolo11 backbone by incorporating a Vision State Space (VSS) block, which leverages Mamba—a State Space Model (SSM) with linear computational complexity—to efficiently capture global context. Furthermore, a Space-to-Depth Convolution (SPD-Conv) module is integrated into the neck to mitigate the loss of fine-grained feature information during downsampling. Experimental results confirm the efficacy of the two-stage strategy. On the cropped dataset, the Mamba-YOLO-SPDC model achieves a mean Average Precision (mAP) of 61.9%, a 238% improvement over the 18.3% mAP obtained by the baseline Yolo11s on the original images. Compared to the conventional SAHI framework, the proposed method provides superior accuracy with a substantial increase in inference speed. This work demonstrates that the ‘localize first, then detect’ strategy, powered by the Mamba-YOLO-SPDC model, offers an effective balance between accuracy and efficiency for small object detection.

9 August 2024 in Energies
Verified
Journal Article
Open access
PDF file
YLYuan Li
Yuan Li
SSShi Su
Shi Su
FHfaping hu
faping hu
XHXuehao He
Xuehao He
BLBotong Li
Botong Li
FCFahui Chen
Fahui Chen
As the demand for power supply stability and reliability in the active distribution network (ADN) increases, the primary and secondary integrated intelligent switch (PSIIS) has become the primary choice for smart grid transformation in many weak infrastructure areas. However, the number of PSIISs that can be configured is often limited. It is necessary to comprehensively utilize the measurement data and sectional capabilities of PSIISs through the optimal configuration method to find the optimal configuration scheme. Therefore, fault observability-related indexes (FORIs) are proposed based on the functional characteristics of PSIISs. These indexes include fault type observability, fault location observability, fault current distribution characteristics observability, transition resistance observability, and weak infrastructure area observability. An optimization configuration model of PSIISs considering the comprehensive fault observability (CFO) is constructed. The adaptive genetic algorithm (AGA) is selected as the model-solving method. Subsequently, an optimal configuration method of PSIISs considering CFO is proposed. Finally, an example analysis is conducted in MATLAB to verify the effectiveness and feasibility of the proposed method. This optimal configuration method aims to maximize the use of a limited number of PSIISs by considering CFO, and the AGA proves to be an effective tool in solving the optimal configuration scheme.

28 January 2026 in Energies
Verified
Journal Article
Open access
PDF file
SSShi Su
Shi Su
YLYuan Li
Yuan Li
XHXuehao He
Xuehao He
FHfaping hu
faping hu
YGYingwei Guo
Yingwei Guo
JZJing Zhang
Jing Zhang
The widespread integration of inverter-based distributed generators (IIDGs) severely limits the adaptability of conventional three-step overcurrent protection in distribution networks (DNs). To address weak rural infrastructure and incomplete post-fault data, this paper proposes a dynamic adaptive current protection strategy for active distribution networks (ADNs) against two-phase short-circuit faults (TPSCFs), using local sequence components. First, we derive analytical expressions for positive/negative-sequence current/voltage at feeder outlet protection devices during TPSCFs, analyzing how the IIDG fault output affects these components. Based on this, an adaptive scheme is developed using only local measurements, with feeder head voltage/current sequence components as criteria. Leveraging line impedance and topology, the scheme ensures selective, accurate fault section identification under incomplete measurements, requiring only feeder head sequence data. A high-IIDG-penetration DN model is built in PSCAD/EMTDC, and TPSCFs under various conditions are simulated. Results show the scheme provides rapid, reliable full-line protection for TPSCFs in IIDG-penetrated ADNs, enhancing protection effectiveness.

10 September 2026 in Algorithms
Verified
Journal Article
Open access
PDF file
ZLZihan Li
Zihan Li
Bo YangBo Yang
Bo Yang
HZHuanming Zhang
Huanming Zhang
XZXiangyu Zhao
Xiangyu Zhao
YHYuanweiji Hu
Yuanweiji Hu
XHXuehao He
Xuehao He
The increasing penetration of electric vehicles (EVs) creates new challenges for coordinated planning of charging and battery-swapping infrastructure. This study aims to develop a joint location and capacity planning framework for electric vehicle charging stations (EVCSs) and electric vehicle swapping stations (EVSSs) in an electric–traffic coupled system, considering infrastructure cost, user service requirements, and distribution-network performance. A multi-objective planning model is established based on spatial-temporal energy replenishment demand and traffic–grid coupling. To improve computational efficiency, a random forest surrogate-assisted NSGA-III (RF-SA-NSGA-III) is proposed, in which expensive user-service and voltage-related objective evaluations are selectively approximated by random forest models, combined with periodic true-model correction and final verification. Case studies show that the proposed method obtains competitive Pareto-optimal solutions and replaces 89.38% of expensive evaluations, reducing computational time from 45,706.3 s to 4689.4 s. The framework provides practical support for coordinated EVCS–EVSS siting and capacity allocation while balancing investment, user service quality, and voltage performance.