Yuna Wu

Prof. Yuna Wu


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 April 2022 in Metallurgical and Materials Transactions A
Verified
Journal Article
Closed access
PDF file
HLHengcheng Liao
Hengcheng Liao
YWYuna Wu
Yuna Wu
HCHao Chen
Hao Chen
LQLongjie Qian
Longjie Qian

28 March 2019 in Metals
Verified
Journal Article
Open access
PDF file
YYYuchun Yuan
Yuchun Yuan
QGQingfang Guo
Qingfang Guo
JSJiapeng Sun
Jiapeng Sun
HLHuan Liu
Huan Liu
QXQiong Xu
Qiong Xu
AMAibin Ma
Aibin Ma
Mechanical properties usually take precedence for wrought magnesium alloy when it would be used as a structure material. This paper proposed an approach that achieved high strength in AZ91 Mg alloy. The main procedure combined solution heat treatment, equal channel angular pressing (ECAP), and the subsequent low temperature rolling. After solution heat treatment and ECAP, the alloy had fine grains and excellent ductility, which benefited the following rolling at low temperature. By the following rolling (at 150 °C), the strength was further increased to ~432 MPa with a moderate ductility. This approach was proved effective in refining the grains and accumulating dislocations. The ultrahigh strength was attributed to the high density of dislocations and fine structure. The uniformly distributed fine precipitates also supplied precipitate hardening. Recrystallization that happened during rolling and annealing was the main reason for the moderate ductility.

5 October 2019 in Materials
Verified
Journal Article
Open access
PDF file
ZZzhou zhikai
zhou zhikai
DSDan SONG
Dan SONG
Ningning LiangNingning Liang
Ningning Liang
HJHaiyang Jiang
Haiyang Jiang
BGBo Gao
Bo Gao
XMXiaolong Ma
Xiaolong Ma
In this paper, the effect of the equal-channel-angular-pressed (ECAPed) substrate on the coating formation and anticorrosion performance of the anodized Al–11Si alloy was systematically investigated. The ECAP process dramatically refines both Al and Si phases of the alloy. The parallel anodizing circuit is designed to enable a comparative study of anodizing process between the cast and the ECAPed alloys by tracking their respective anodizing current quota. The optimum coatings of both alloys were obtained after anodization for 30 min. The ECAPed alloy attained a thicker, more compact, and more uniform coating. Energetic crystal defects in the fine Al grains of the ECAPed substrate promote the anodizing reaction and lead to the thicker coating. Fragmented and uniformly distributed fine Si particles in the ECAPed alloy effectively suppress the coating cracks, enhancing the compactness of the coating. Overall, the ECAP-coated sample exhibits the best anticorrosion performance, which is evidenced by the concurrently enhanced prevention of coating and improved corrosion resistance of the substrate.

16 October 2024 in Coatings
Verified
Journal Article
Open access
PDF file
XFXuefei Fang
Xuefei Fang
YYYuchun Yuan
Yuchun Yuan
QWQiuyue Wang
Qiuyue Wang
CJChengwei Ji
Chengwei Ji
YWYuna Wu
Yuna Wu
AMAibin Ma
Aibin Ma
Graphene oxide (GO) is considered an ideal material for applications involving corrosion resistance due to its excellent properties. However, the structure, surface functional groups, and distribution of GO in zinc-rich coatings (ZRCs) have a remarkable influence on coating properties. GO was reduced in a hydrochloric acid environment using spherical zinc powder, and the resulting products were subsequently dried and incorporated into waterborne inorganic ZRCs. Results show that zinc powder effectively reduces oxygen-containing functional groups on the GO surface, and reduced GO (rGO) is deposited on the surface of zinc powder. This improves the electron migration efficiency of rGO and decreases its surface energy. The electrochemical impedance spectroscopy (EIS) and salt spray test results demonstrate that among the coatings, the ZRC containing 0.2 wt.% rGO (40Zn–0.2rGO) exhibits the highest impedance modulus at the low frequency end. Its impedance modulus reaches 1 × 104 Ω∙cm2 after 216 h immersion. Furthermore, 40Zn–0.2rGO exhibits no signs of corrosion at the marked areas even after 216 h of the salt spray test. The good dispersion effect of the added 0.2 wt.% rGO in the coating, coupled with its exceptional electrical conductivity, facilitates the enhanced contribution of zinc powder to cathodic protection, thereby mitigating the matrix erosion caused by corrosive media. Following zinc powder corrosion, the surface of the coating can still be adorned with insoluble corrosion products such as ZnO or Zn5(OH)8Cl2, thereby offering shielding protection to the substrate.

17 July 2025 in Metallurgical and Materials Transactions A
Verified
Journal Article
Closed access
PDF file
YWYuna Wu
Yuna Wu
CHChengcheng Han
Chengcheng Han
ZLZonghan Li
Zonghan Li
YHYitong Hu
Yitong Hu
CCChen Chen
Chen Chen
Yonghao ZhaoYonghao Zhao
Yonghao Zhao

6 September 2024 in Acta Metallurgica Sinica (English Letters)
Verified
Journal Article
Closed access
PDF file
CHChengcheng Han
Chengcheng Han
YWYuna Wu
Yuna Wu
HHHao Huang
Hao Huang
CCChen Chen
Chen Chen
HLHuan Liu
Huan Liu
HLHengcheng Liao
Hengcheng Liao