Underground mining is a difficult area for miners to work. Miners must go to the working faces by walking, which is not only time consuming but also physically demanding. In mines, a man-rider chair lift system (MRCL) has been developed to alleviate the strain stresses caused by walking lengthy and uneven distances up to the working faces. All parameters, including horizontal and vertical distances, variation and inclination of underground mines, slope forces considering the weight of persons and chair, forces acting towards return and drive unit, curves angles, power to operate, and rope safety factor, are calculated mathematically while modelling a man-rider chair lift system for both the installation and extension phases. We analyzed the analytical approach in conjunction with practical installation of the man-rider chair lift system to establish if the installation and extension of MRCL is genuinely feasible in the current scenario. We also created a simulation model of steel wire rope in Creo 8.0 for analyzing the various stresses on it with the Ansys R 16.2 software. In both phase I and phase II, the factor of safety is above that recommended, and the system is a hundred percent reliable, risk-free, and safe for operation.
In underground mining, ventilation systems account for a significant portion of total power consumption. In this study, axial fans have been considered a primary target for energy-saving strategies. Affinity laws have been applied to analyze the energy-saving potential of axial fan speed reduction in underground mining ventilation systems. Real-time data monitoring was conducted to assess fan performance, energy consumption, and mechanical behaviour. Mathematical models were developed to evaluate the effects of speed reduction on mechanical wear, bearing life, and motor longevity. The results demonstrate that reducing fan speed by 10 and 50% save approximately 30.59 and 97.03 kW of power respectively and annual savings range from Rs 368,456 to Rs 2,337,453, depending on operational hours. Additionally, reducing fan speed improves mechanical wear performance, nearly doubles bearing life at 20% speed reduction, and significantly extends motor lifespan. By reducing fan speed using VFDs, substantial energy savings, improved equipment longevity, and lower operational costs can be achieved, contributing to both economic and environmental goals in mining operations.
1 August 2022 in Arabian Journal for Science and Engineering