Vagner Medeiros

Mr. Vagner Medeiros

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 October 2024 in Metals
Verified
Journal Article
Open access
PDF file
Francisco Cavilha NetoFrancisco Cavilha Neto
Francisco Cavilha Neto
VMVagner Medeiros
Vagner Medeiros
Vicente SalinasVicente Salinas
Vicente Salinas
EPEdgar Ivan Pio
Edgar Ivan Pio
Claudio AguilarClaudio Aguilar
Claudio Aguilar
CBCristiano Binder
Cristiano Binder
Highly porous titanium foams are great candidates for replacing bone structures with a low elastic modulus owing to their ability to avoid the stress shielding effect. However, the production of highly porous foams (>70 vol.%) with well-distributed, stable, and predictable porous architectures using powder compaction and space holders is challenging. In this study, pure titanium powder and mechanically alloyed Ti-13Ta-6Sn were mixed with 50, 70, and 80 vol.% KCl powders as a space holder, cold-compacted, and sintered in a plasma-assisted sintering reactor to produce highly porous foams. The space holder was completely removed using heat and plasma species collisions prior to sintering. A Ti-13Ta-6Sn alloy powder with α, β, and metastable FCC-γ phases was synthesized. The characteristics of the alloyed powder, mixing step, and the resulting sintered samples were compared to those of CP-Ti. After sintering, the alloy exhibited α and β phases and a reduced elastic modulus. Foams with an elastic modulus in the range of the cortical and trabecular bones were obtained. The results showed the effects of the space holder volume fractions on the volume fraction, size, distribution, interconnectivity, and shape of the pores. The Ti-13Ta-6Sn foams exhibited a uniform open-celled porous architecture, lower elastic modulus, higher yield strength, and higher passivation resistance than CP-Ti. Ti-13Ta-6Sn exhibited a nontoxic effect for the mouse fibroblast cell line.

15 October 2026 in SSRN Electronic Journal
Verified
Preprint
Open access
VMVagner Medeiros
Vagner Medeiros
LELeandro Lima Evangelista
Leandro Lima Evangelista
SBS. C. Bevilaqua
S. C. Bevilaqua
AFAntonio Itamar Ramos Filho
Antonio Itamar Ramos Filho
CBCristiano Binder
Cristiano Binder
This work addresses the development of a soft magnetic composite (SMC) by applying a double-layer hybrid electrical insulating coating of graphene oxide (GO) and boric acid on iron powder. During heat treatment, boric acid decomposes into a continuous glassy boron oxide barrier that effectively suppresses eddy currents. The coating architecture relies on a minimal, strictly controlled GO concentration (0.1 g/L) to provide interfacial anchoring, alongside boric acid, which thermally decomposes into a continuous glassy boron oxide barrier to suppress eddy currents. The study found that higher concentrations of GO are detrimental, as the agglomeration and partial thermal reduction of GO to a conductive state (rGO) form electrical percolation paths that drastically increase dynamic losses. Ultimately, combining this optimal minimal carbon fraction with boric acid and a 450 °C heat treatment yielded a double-layer SMC with total core losses of 49.36 W/kg (at 1.0 T and 400 Hz). This represents a 15% reduction in total core losses compared to previous studies, yielding a competitive soft magnetic composite for electrical applications.