Graphite is a critical material used as the negative electrode in lithium-ion batteries. Both natural and synthetic graphites are utilized, with the latter obtained from a range of carbon raw materials. In this paper, efforts to synthesize graphite from coal as a domestic feedstock for synthetic graphite are reported. Domestic coal-derived graphite could address national security and energy issues by standing up domestic supply chains for battery critical materials. The performance in lithium-ion coin cells of this coal derived graphite is compared to a commercial battery-grade graphite. For the first time, a multi-species, multi-reaction (MSMR) modeling technique is applied to synthetic graphite derived from coal. Key thermodynamic, transport, and kinetic parameters are obtained for the coal derived graphite and compared to the same parameters for commercial battery-grade graphite. Modeling of synthetic graphites will allow for virtual evaluation of these materials toward production of domestically sourced graphite.
The use of nicotinamide cofactors in cell-free biocatalytic systems is necessitated by the high specificity that these enzymes show for their natural redox mediators. Unfortunately, isolation and use of natural cofactors is costly, which suggests that enhancing their stability is key to enabling their use in industrial processes. This study details NAD+ and NADH stability in three buffer systems (sodium phosphate, HEPES, and Tris) at 19 °C and 25 °C and for up to 43 d. In Tris, both NADH and NAD+ were found to be highly stable. NADH degradation rates of 4 μM/d (19 °C) and 11 μM/d (25 °C) were observed in Tris buffer, corresponding to >90% and 75% remaining after 43 d, respectively. Higher degradation rates (up to 34 μM/d) were observed when sodium phosphate or HEPES buffers were used. The effect of a mild increase in temperature was determined to be significant for long-term stability, and it was shown that degradation under these conditions can be easily monitored via UV–Vis, because the degradation proceeds via the oxidation/de-aromatization of the dihydropyridine ring. Overall, this work emphasizes that the choice of buffer system is consequential for bioreactor systems employing natural nicotinamide cofactors for extended periods of time.
1 October 2023 in Journal of the Electrochemical Society
Developing alternative, industrially viable ethylene production routes has received important research attention. One chemical pathway of interest is the oxidative dehydrogenation (ODH) of ethane, although issues such as product selectivity, combustion hazards, and oxidizer supply have hindered the practical scale-up of this technology. The presented work describes the use of a solid oxide fuel cell (SOFC) platform employing lanthanum-strontium-iron oxide perovskite (La1-xSrxFeO3-δ, or LSFx) electrocatalysts to perform electrochemical-ODH (e-ODH), a process design that has the potential to address the challenges of ODH implementation. The effects of La and Sr stoichiometry, operating temperature, and current density are reported. The highest performance was observed using a La:Sr ratio of 0.50 (LSF0.50) at 750 °C and a current density of 0.50 A·cm−2, achieving an ethane conversion of 18.7 ± 0.3%, ethylene selectivity of 91.4 ± 1.9%, and ethylene yield of 17.1 ± 0.1%. These results demonstrate several potential advantages for utilizing a SOFC platform to perform e-ODH of ethane to ethylene.