Developing alternative, industrially viable ethylene production routes has received important research attention. One chemical pathway of interest is the oxidative dehydrogenation (ODH) of ethane, although issues such as product selectivity, combustion hazards, and oxidizer supply have hindered the practical scale-up of this technology. The presented work describes the use of a solid oxide fuel cell (SOFC) platform employing lanthanum-strontium-iron oxide perovskite (La1-xSrxFeO3-δ, or LSFx) electrocatalysts to perform electrochemical-ODH (e-ODH), a process design that has the potential to address the challenges of ODH implementation. The effects of La and Sr stoichiometry, operating temperature, and current density are reported. The highest performance was observed using a La:Sr ratio of 0.50 (LSF0.50) at 750 °C and a current density of 0.50 A·cm−2, achieving an ethane conversion of 18.7 ± 0.3%, ethylene selectivity of 91.4 ± 1.9%, and ethylene yield of 17.1 ± 0.1%. These results demonstrate several potential advantages for utilizing a SOFC platform to perform e-ODH of ethane to ethylene.
The oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are two processes that occur during the operation of the cathodic electrode in Zn–Air batteries, which enable the integration of alternative energy sources into electrical energy distribution systems. Transition metal oxides, such as perovskites based on LaNiO3, are promising electrocatalysts for the ORR and OER in alkaline medium due to their versatile structure, allowing for the substitution of certain atoms with dopants, which enhances the catalytic activity for both reactions. This work reports an electrochemical study of the catalytic activity toward ORR and OER of perovskite catalysts (LaNiO3 doped with transition metals (Fe, Mn, or Pd)) in the presence of carbon-based materials as supports (multiwalled carbon nanotubes (MWCNT), graphene oxide nanosheets (GO), and graphitic carbon (C)). The results revealed interesting catalytic properties in both reactions, particularly La(Ni0.9Pd0.1)O3/MWCNT, which showed an ORR activation potential of 0.87 V vs. RHE, comparable to that of the commercial Pt/C catalyst (0.99 V vs. RHE), while the overpotential for OER was lower than that of the Pt/C catalyst (1.68 V vs. RHE for La(Ni0.9Pd0.1)O3/MWCNT and 1.79 V vs. RHE for the commercial Pt/C).