Yusuf Guzel

Dr. Yusuf Guzel

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 April 2024 in Sustainability
Verified
Journal Article
Open access
PDF file
ASAli Sinan Soğancı
Ali Sinan Soğancı
YYYavuz Yenginar
Yavuz Yenginar
IÖIlyas Özkan
Ilyas Özkan
YGYusuf Guzel
Yusuf Guzel
AOAdnan Ozdemir
Adnan Ozdemir
Red mud (RM) is a waste material obtained during the production of aluminum from bauxite minerals. RM causes environmental pollution due to its high alkaline properties. Therefore, RM materials are stored in waste reservoirs. As production continues, the number of required waste reservoirs increases day by day. This study aims to utilize RM waste material in construction structures to contribute to the economy. The research investigates the potential use of RM waste material as road fill material. RM was improved using another waste material of fly ash (FA) since RM has low strength. Atterberg limit tests, compaction tests, unconfined compression tests, CBR tests, and SEM analyses were conducted on stabilized RM samples. In the physical properties of stabilized RM, Atterberg limits and optimum moisture content increase and density decreases since FA content increases. In the mechanical properties of stabilized RM, unconfined compressive strength, initial and secant modulus of elasticity, and California bearing ratio increase and maximum peak strain decreases since FA content and curing period increase. SEM images prove the increase in mechanical properties due to the cementation products (CSH and CAH gels) formed in the microstructure of stabilized RM. The results showed that RM waste stabilized with FA can be used as road subgrade material.

3 October 2023 in Geotechnical and Geological Engineering
Verified
Journal Article
Closed access
PDF file
YGYusuf Guzel
Yusuf Guzel



6 January 2023 in Geosciences
Verified
Journal Article
Open access
PDF file
YGYusuf Guzel
Yusuf Guzel
GEGaetano Elia
Gaetano Elia
MRMohamed Rouainia
Mohamed Rouainia
GFGaetano Falcone
Gaetano Falcone
A key issue for the estimation of ground shaking is the proper selection of input motions at the seismic bedrock. At the same time, the effect of the input motion scaling strategy on structural response is typically studied disregarding the presence of the soil deposit. In this work, different soft soil deposits are selected by varying the shear wave velocity profiles and the depth to the seismic bedrock, modelling the soil behaviour through a nonlinear constitutive model implemented into a fully coupled FE code. Seven input motions are retrieved for several selection strategies in conjunction with two seismic intensity levels. Hence, more than 300 one-dimensional ground response analyses are performed. The results of the analysed cases, which are presented in terms of spectral response at ground surface and amplification factors, indicate that: (i) the use of an advanced elasto-plastic soil constitutive model accounts for nonlinear ground response effects, including higher site amplification in the mid-period range and deamplification of the peak ground accelerations; (ii) the different scaling strategies lead to comparable mean values of the amplification factors, and (iii) the variability of the amplification factors is significantly reduced when the scaling strategy seeks the compatibility with the target spectrum over a specified period range. The research will aid the prediction of local seismic site response over large areas, particularly in the absence of the fundamental period of a structure and facilitate its use in general recommendation for quantifying and reducing uncertainty.

19 October 2024 in Sustainability
Verified
Journal Article
Open access
PDF file
ASAli Sinan Soğancı
Ali Sinan Soğancı
IÖIlyas Özkan
Ilyas Özkan
YYYavuz Yenginar
Yavuz Yenginar
YGYusuf Guzel
Yusuf Guzel
AOAdnan Ozdemir
Adnan Ozdemir
This study provides a comprehensive evaluation of red mud as a sustainable material for road base construction, particularly in combination with bottom ash. Red mud, a by-product of the Bayer process used in alumina extraction, is known for its high alkalinity and heavy metal content. For this reason, this waste material causes environmental challenges. Red mud sourced from the Eti Aluminum Factory in Seydişehir, Konya (Turkey), was stabilized with bottom ash. Then, these waste materials were tested through a number of experiments, such as in relation to their Atterberg limits, compaction characteristics, unconfined compressive strength (UCS), California bearing ratio (CBR), and microstructure through a scanning electron microscopy (SEM) analysis. The results highlight that the UCS of stabilized red mud samples significantly improved with the addition of bottom ash and longer curing periods. Specifically, the UCS values increased from 0.5 MPa to 2.5 MPa after 28 days of curing. Moreover, RM specimens stabilized with 25% bottom ash achieved a CBR value of 146.64% after 28 days, far exceeding Turkey’s road fill material requirement, which mandates a minimum unsoaked CBR value of 15%. These findings indicate that red mud stabilized with bottom ash not only meets but exceeds the structural requirements for road base materials. This approach provides a sustainable solution for the environmental management of red mud while contributing to infrastructure development. Through the recycling of these industrial by-products, this study presents a viable method to reduce waste and support economic and environmental sustainability in road construction projects.