Inductor-capacitor (LC) passive wireless sensors are implemented by loose coupling between an external read-out coil and an inductor that receives power through this inductive coupling. They allow for continuous real-time detection in harsh or sealed environments where physical access is difficult. Changes in the sensors are wirelessly and remotely detected by the read-out coil. For implanted medical devices or sealed package applications, however, geometrical constraints such as small and noninvasive coils reduce the inductive coupling, turning the remote distance into a fundamental challenge. Here we propose theoretically and demonstrate experimentally that a parity-time (PT) symmetry breaking regime can be utilized to extend the remote distance of the LC passive wireless sensors. In our prototypes, a capacitive humidity sensor is fabricated with graphene oxide (GO) as a sensing material. The variable capacitance in the external read-out coil is cyclic scanned so as to keep the PT-symmetric configuration. Our results show that the read-out distance of the sensors with the PT-symmetric configuration is approximately 4 times as long as that with conventional methods while keeping the same for their sensitivity. The use of PT-symmetry-breaking regimes for the LC passive wireless sensors should enable the interrogation of applications in the implanted or sealed fields.
Inductor–capacitor (LC) wireless sensors are highly useful in applications that require them to be powered remotely and operated in rotating parts or harsh environments. Recent advances in the fields of parity-time (PT) symmetry proposed in the context of quantum mechanics have revealed that the performance of the LC wireless sensors can be improved. The basic sensing principle is to detect changes of the sensing capacitance, i.e., perturbation in PT- symmetry, through monitoring the frequency shift, i.e., eigenvalues in PT-symmetry. Here, we have analyzed and compared the sensitivity of the LC wireless sensors biased under an exact phase and near an exceptional point (EP). The frequency splitting responses of the PT-symmetric LC wireless sensors with the symmetric gain-loss arrangement are presented under asymmetric and symmetric perturbation, respectively. It shows that the asymmetric perturbation breaks PT-symmetry, leading to complex eigenvalues. In the exact phase, the high frequency response of two normal mode frequencies to symmetric perturbation shows the optimum sensitivity. The resulting eigenvalues splitting is proportional to the square root of perturbation near the EPs for both asymmetric and symmetric perturbation. The sensitivity to asymmetric perturbation is higher than that to symmetric perturbation. Finally, a capacitive humidity sensor was used to demonstrate the analysis.
With the rapid development in sensor network technology, the complexity and diversity of application scenarios have put forward more and more new requirements for inductor–capacitor (LC) sensors, for instance, multi-parameter simultaneous monitoring. Here, the parity–time (PT) symmetry concept in quantum mechanics is applied to LC passive wireless sensing. Two or even three parameters can be monitored simultaneously by observing the frequency response of the reflection coefficient at the end of the readout circuit. In particular, for three-parameter detection, a novel detection method is studied to extract the three resonant frequencies of the system through the phase–frequency characteristics of the reflection coefficient, which has never appeared in the previous literature on PT symmetry. The changes in three resonant frequencies are in response to changes in the three parameters in the environment. We show theoretically and demonstrate experimentally that the PT-symmetric LC sensor can realize multi-parameter measurement using a series LCR circuit as the sensor and a symmetric adjustable LCR circuit as the readout circuit. Our work paves the way for applying PT symmetry in multi-parameter detection.