Bruno Di Buò

Dr. Bruno Di Buò


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 May 2020 in Geosciences
Verified
Journal Article
Open access
PDF file
MSMarta Di Sante
Marta Di Sante
BBBruno Di Buò
Bruno Di Buò
EFEvelina Fratalocchi
Evelina Fratalocchi
TLTim Länsivaara
Tim Länsivaara
This paper presents the results of research aimed at studying the hydraulic and mechanical behavior of Finnish soft clays treated by quicklime. This research investigated the effect of water content and curing time on the characteristics of the compacted soil treated with 7% lime, with the aim of verifying the effectiveness of lime treatment and evaluating its possible re-use, thus avoiding landfill disposal. A laboratory-testing program was carried out both on treated and untreated soil, supported by microstructural investigation. Results have shown a general increase of the hydraulic conductivity due to the addition of lime, reduction of compressibility, and increase in the soil shear strength for a wide range of water contents (10%–40%), proving the effectiveness of the lime treatment. Lime addition to the compacted clay at high water contents (90%–130%) turned out to improve the mechanical characteristics to a lesser extent, while fractionated lime supply did not significantly improve the mechanical performance. The results of this research demonstrate that the re-use of sensitive clays, typically of high water contents, by lime addition require a drying process. Different drying procedures can be adopted (proposed in the paper) depending on the specific site conditions. However, the soil treatment is generally economically convenient in comparison to the disposal in waste landfills, which would represent the only alternative solution.

1 January 2019 in AIMS Geosciences
Verified
Journal Article
Open access
PDF file
BBBruno Di Buò
Bruno Di Buò
MDMarco D’iGnazio
Marco D’iGnazio
JSJuha Selänpää
Juha Selänpää
MHMarkus Haikola
Markus Haikola
TLTim Länsivaara
Tim Länsivaara
MSMarta Di Sante
Marta Di Sante
Understanding the behavior of soft sensitive clays is a key aspect of geotechnical design, especially in those regions where constructions are planned in marine clay areas. In Finland, one of the major geotechnical issues is the stability and deformation of the railway embankments located on soft soil deposits. The Tampere University of Technology (TUT) and the Finnish Transport Agency (FTA) have been carrying out a research project aiming to a better understanding of strength and deformation properties of Finnish soft clays. As a part of this project, a detailed site investigation was conducted at Perniö site in Western Finland. This paper presents the details of the geotechnical investigation, including field testing, sampling operations, and the laboratory testing program. In particular, an open drive tube sampler with 132 mm diameter, designed at TUT, was used to collect high quality samples. For comparison, samples were also taken using the conventional piston samplers and Sherbrooke Mini-block sampler. Field testing included piezocone, vane shear, and seismic piezocone. Laboratory testing consisted of index, consolidation, triaxial and simple shear tests. A comprehensive study of all these data is presented in a framework to describe Perniö soft clay.

1 November 2020 in Canadian Geotechnical Journal
Verified
Journal Article
Closed access
BBBruno Di Buò
Bruno Di Buò
MDMarco D’ignazio
Marco D’ignazio
JSJuha Selänpää
Juha Selänpää
TLTim Länsivaara
Tim Länsivaara
PMPaul W. Mayne
Paul W. Mayne
A well-established analytical model based on spherical cavity expansion and critical state soil mechanics theories is applied to piezocone soundings for profiling the yield stress and overconsolidation ratio of five soft sensitive test sites located in Finland. Yield stress is related to three piezocone parameters: net cone resistance, excess porewater pressure, and effective cone resistances. Input geoparameters include the effective stress friction angle, defined at both peak strength and at maximum obliquity, and the model directly provides the operational value of the undrained rigidity index. The piezocone-evaluated profiles compare favorably with results from laboratory constant-rate-of-strain consolidation tests for all the investigated sites. Based on the obtained experimental results, simplified correlations valid for Finnish soil conditions are derived. Their validity is assessed based on the bias factor, coefficient of variation, and coefficient of determination, showing a fairly good agreement between the predicted and the target values.

14 December 2024 in Minerals
Verified
Journal Article
Open access
PDF file
MSMarta Di Sante
Marta Di Sante
EFEVELINA FRATALOCCHI
EVELINA FRATALOCCHI
FMFRANCESCO Mazzieri
FRANCESCO Mazzieri
BBBruno Di Buò
Bruno Di Buò
TLTim Länsivaara
Tim Länsivaara
The paper analyses physico-chemical and geotechnical characteristics of four Scandinavian sensitive soils formed under different environmental depositional conditions, with the main aims to contribute to the knowledge of sensitive soils and assess the potassium sorption capacity among the investigated soils, as a basic characteristic to evaluate the effectiveness of treatment with KCl and to analyse potassium migration in such soils. The results show that, although the chemical composition of the four soils is very similar, their sensitivity is significantly different. The correlation from literature linking the specific surface, mineralogy, and plasticity in sensitive clays of Eastern Canada, was found to be qualitatively valid for the investigated Scandinavian sensitive clays, too. The highest value of the sensitivity index among the tested soils was found to be related to the lowest cation exchange capacity and to a limited amount of amorphous minerals. These characteristics contribute to explaining the highly sensitive behaviour of that soil affecting the structure formation during the deposition stage. The potassium sorption capacity has been experimentally investigated through batch tests specifically performed on the sensitive soils, as the first step to quantify the maximum sorption capacity and identify the main factors affecting it. The maximum potassium sorption capacity was always lower than that estimated by the cation exchange capacity, and it increased with the cation exchange capacity, plasticity index, and activity of the soils, as well as with the amount of phyllosilicates and amorphous minerals.

17 September 2024
Verified
Book Chapter
Open access
PDF file
BBBruno Di Buò
Bruno Di Buò
PMP.W. Mayne
P.W. Mayne
PPP. Paniagua
P. Paniagua
SAS.S. Agaiby
S.S. Agaiby
Evaluating undrained shear strength in clayey soils, especially soft sensitive clays in Finland, is crucial for several geotechnical engineering applications. In-situ investigation methods, including field vane and piezocone testing, offer versatile methodologies to assess the soil parameters, overcoming issues related to undisturbed soil sampling. Challenges in using the field vane in soft sensitive clays are discussed, as well as the improvements offered by piezocone testing. However, evaluating cone factors to assess the undrained shear strength is not straightforward, owing to soil strength anisotropy and overconsolidation effects. The paper focuses on assessing the undrained and remoulded shear strength in Finnish soft sensitive clays based on an extensive experimental program conducted at four different test sites, comparing the results obtained from piezocone, field vane, and fall cone tests. Discrepancies among these methods are highlighted, as well as possible improvements in devices and test interpretation to assess the soil parameters correctly. <!----> <!----> <!----> <!---->