Raw earth is a construction material unknown to most people. Nowadays, raw-earth constructions are an area of growing interest, both for rescuing the heritage and for a rediscovered environmentally friendly building and eco-sustainability material. However, because raw-earth constructions are a forgotten technique, we find problems of a lack of skilled people at all levels in this area, from designers to masons, as well as problems of how to carry out compatible conservation works on earthen heritage. This paper tries to fill the gap for a peculiar historic earthen building technology, namely cob (or bauge), which is present in Macerata in the center of Italy. Results are presented on regaining possession of the material and constructional aspects and their initial structural resources, and guidelines are given on how to improve the manufacturing process to reuse the cob technique for construction and for how to accurately work on it for a compatible and sustainable conservation.
The aim of the present note is to contribute to the search for sustainable binders to be used for soil stabilization purposes. Fly ash and quicklime are added to a clayey soil of low plasticity in different proportions; samples were prepared by wet mixing and Standard Proctor compaction of the soil–water–binder mixture. Permeability tests were carried out for the first 28 days of curing, varying the moulding water content of the investigated samples. Compressibility was evaluated through one-dimensional consolidation tests performed after 7 days of curing and shear strength was investigated at the same curing time. Reactions development was successfully monitored by measuring pH and small strain shear modulus by means of bender elements testing for the first 28 days of curing. Microstructural investigation through scanning electron microscope and Energy dispersive X-Ray Spectroscopy revealed the presence of pozzolanic products in the mixture, reflecting the reduction in compressibility and the improvement in the mechanical characteristics of the soil of concern, after the treatment. The addition of the combination of fly ash and quicklime allowed to enhance the draining capability of the mixtures, especially when the mixture is compacted at optimum water content.
The paper analyses physico-chemical and geotechnical characteristics of four Scandinavian sensitive soils formed under different environmental depositional conditions, with the main aims to contribute to the knowledge of sensitive soils and assess the potassium sorption capacity among the investigated soils, as a basic characteristic to evaluate the effectiveness of treatment with KCl and to analyse potassium migration in such soils. The results show that, although the chemical composition of the four soils is very similar, their sensitivity is significantly different. The correlation from literature linking the specific surface, mineralogy, and plasticity in sensitive clays of Eastern Canada, was found to be qualitatively valid for the investigated Scandinavian sensitive clays, too. The highest value of the sensitivity index among the tested soils was found to be related to the lowest cation exchange capacity and to a limited amount of amorphous minerals. These characteristics contribute to explaining the highly sensitive behaviour of that soil affecting the structure formation during the deposition stage. The potassium sorption capacity has been experimentally investigated through batch tests specifically performed on the sensitive soils, as the first step to quantify the maximum sorption capacity and identify the main factors affecting it. The maximum potassium sorption capacity was always lower than that estimated by the cation exchange capacity, and it increased with the cation exchange capacity, plasticity index, and activity of the soils, as well as with the amount of phyllosilicates and amorphous minerals.
The hydraulic performance and migration parameters of cementitious mixtures are currently under investigation by an experimental study. The main aim of the research is to investigate the diffusion coefficient and sorption capacity of the mixtures and their interaction with inorganic sulphate solutions at different concentrations, as a function of their composition and curing time. The paper shows and discusses the results related to the hydraulic performance and the sorption capacity as a function of the mixtures composition. Simulations of solute migration through cut-offs made by the different mixtures investigated show the importance of taking into account their sorption capacity to optimize the design.
Risk assessment is a key issue for contaminated sites and requires modeling the migration of contaminants from the soil source towards the targets. For that purpose, analytical models and site-specific model parameters are commonly used. Some widely used volatilization models may significantly overestimate the emission of vapors from soil, and, therefore, the exposure of human targets to pollutants. The present note describes the results of measurements of mercury vapor emission from soil at an actual contaminated site. The surveys were carried out measuring both the vapor flux from soil by means of open dynamic flux chambers and the concentration in open air through direct measurements. Four surveys were carried out over one year, in order to take into account seasonal variations. For a given investigation point, the measurements were compared with the predictions of volatilization models, pointing out that the actual emissions were lower than those estimated by the models.