At the heart of a flight simulator resides the mathematical representation of aircraft behaviour in response to control inputs, atmospheric disturbances and system inputs including failures and malfunctions. While this mathematical model can never be wholly accurate, its fidelity, in comparison with real world behaviour, underpins the usefulness of the flight simulator. The present paper examines the state of the art achieved in validating mathematical models for helicopter simulators, addressing the strengths and weaknesses of the present European standard for the qualification of helicopter flight simulators, JAR FSTD-H (previously JAR-STD-1H/2H/3H). Essential questions are examined, such as: What is the required model fidelity to guarantee a simulation is sufficiently representative to be fit for purpose? Are the tolerances set in the current standards fine enough that they lead to only minor changes in handling qualities? What is an acceptable tuning process for the simulation? What is the effect of modelling fidelity on the overall pilot control strategy? What is the relationship between the settings of the simulator cueing environment and the behaviour of the pilot? What is the industrial experience on qualification of flight simulators that might usefully inform developments? Many of these questions were addressed in Europe in a previous GARTEUR Action Group (AG) HC/AG-12 the results of which are documented in this paper. Solutions are proposed for improving the current JAR-FSTD standard with respect to validation of mathematical models.
The ‘Ornicopter’ is a single-rotor helicopter without anti-torque rotor developed since 2002 at Delft University of Technology in The Netherlands. The Ornicopter’s principle is similar to the movement of a bird’s wing and is based on actively flapping the blades up and down while rotating them around a shaft to generate both the required lift and the propulsive force. The shaft torque is no longer needed and thus the anti-torque rotor is redundant. The present paper describes the basic principles of the Ornicopter’s forced flapping, discussing the feasibility of the Ornicopter concept with respect to the power required, performance, stability, and vibratory loads. On the one side it is shown that the Ornicopter has a similar power requirement to a conventional helicopter, as well as very similar longitudinal and lateral stability and controllability characteristics to a conventional helicopter. On the other side, the Ornicopter generates higher vibratory loads than in a conventional helicopter, and its performance is strongly limited by the stall effect.
This paper analyzes the effects of the helicopter dynamics on pilots’ learning process and transfer of learned skills during autorotation training. A quasi-transfer-of-training experiment was perfo...
In the present paper, a flight dynamics model is adopted to represent the trim and stability characteristics of a side-by-side helicopter in hovering conditions. This paper develops a numerical representation of the rotorcraft behavior and proposes a set of guidelines for trimming and linearizing the highly coupled rotor dynamics derived by the modeling approach. The trim algorithm presents two nested loops to compute a solution of the steady-state conditions averaged around one blade’s revolution. On the other hand, a 38-state-space linear representation of the helicopter and rotor dynamics is obtained to study the effects of flap, lead–lag, and inflow on the overall stability. The results are compared with an analytical framework developed to validate the rotorcraft stability and compare different modeling approaches. The analysis showed that non-uniform inflow modeling led to a coupled longitudinal inflow–phugoid mode which made the vehicle prone to dangerous instabilities. The flap and lead–lag dynamics introduced damping in the system and can be considered beneficial for rotor dynamics.
Evaluation of the power required in level flight is essential to any new or modified helicopter performance flight-testing effort. The conventional flight-test method is based on an overly simplification of the induced and profile power components required for a helicopter in level flight. This simplistic approach incorporates several drawbacks that not only make execution of flight sorties inefficient and time consuming, but also compromise the level of accuracy achieved. This paper proposes an alternative flight-test method for evaluating the level-flight performance of a conventional helicopter while addressing and rectifying all identified deficiencies of the conventional method. The proposed method, referred to as the corrected-variables screening using dimensionality reduction (CVSDR), uses an original list of 36 corrected variables derived from basic dimensional analysis principles. This list of 36 corrected variables is reduced using tools of dimensionality reduction to keep only the most effective level-flight predictors. The CVSDR method is demonstrated and tested in this paper using flight-test data from a MBB BO-105 helicopter. It is shown that the CVSDR method predicts the power required for level flight about 21% more accurately than the conventional method while reducing the required flight time by an estimate of at least 60%. Unlike the conventional method, the CVSDR is not bounded by the high-speed approximation associated with the induced power estimation, therefore it is also relevant to the low airspeed regime. This low-airspeed relevancy allows the CVSDR method to bridge between the level-flight regime and the hover. Although demonstrated in this paper for a specific type of helicopter, the CVSDR method is applicable for level-flight performance flight testing of any type of conventional helicopter.