Marketa Petova

Dr. Marketa Petova

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 June 2023 in Foods
Verified
Journal Article
Open access
PDF file
Zuzana LazárkováZuzana Lazárková
Zuzana Lazárková
AKAlena Kratochvilova
Alena Kratochvilova
Richardos Nikolaos SalekRichardos Nikolaos Salek
Richardos Nikolaos Salek
ZPZdeněk Polášek
Zdeněk Polášek
SSSiska Siska
Siska Siska
František BuňkaFrantišek Buňka
František Buňka
The novelty of this study is the investigation of the effect of different heat treatments and, simultaneously, the effect of different fat levels on the quality of pork liver pâtés. Hence, this study aimed to evaluate the effect of heat treatment and fat content on selected properties of pork liver pâté. For this purpose, four batches of pâtés with two different fat contents (30 and 40% (w/w)) and two different heat treatments (pasteurisation: target temperature 70 °C, holding time of 10 min; sterilisation: target temperature 122 °C, holding time of 10 min) were manufactured. Chemical (pH, dry matter, crude protein, total lipid, ammonia, and thiobarbituric acid reactive substances (TBARS)), microbiological, colour, textural, rheological, and sensory analyses were performed. Both different heat treatment and fat content affected most of the parameters observed. Sterilisation ensured the commercial sterility of the manufactured pâtés, resulting in elevated TBARS values, hardness, cohesiveness, gumminess and springiness, and increased rheological parameters (G′, G″, G*, and η*), as well as colour changes (decrease in L* and increase in a*, b*, and C* values) and deterioration of appearance, consistency, and flavour also being detected (p < 0.05). Higher fat content caused similar variations in the textural and viscoelastic properties, i.e., the increase in hardness, cohesiveness, gumminess and springiness, and also in G′, G″, G*, and η* (p < 0.05). However, the colour and sensorial parameters changed in different ways compared to the changes induced by the sterilisation effect. Overall, the observed changes might not be desirable for some consumers and further research would be appropriate to improve especially the sensorial attributes of sterilised pork liver pâtés.

19 September 2024 in Animals
Verified
Journal Article
Open access
PDF file
SSSiska Siska
Siska Siska
Robert GalRobert Gal
Robert Gal
FŠFrantišek Štefunko
František Štefunko
ZPZdeněk Polášek
Zdeněk Polášek
Zuzana LazárkováZuzana Lazárková
Zuzana Lazárková
Richardos Nikolaos SalekRichardos Nikolaos Salek
Richardos Nikolaos Salek
Hydrocolloids are used in spreadable meat or poultry products to improve consistency, emulsion stability and water retention, resulting in products with desired functional and organoleptic properties. The scope of the work was to evaluate the addition of three divergent algal hydrocolloids (κ-carrageenan, ι-carrageenan, furcellaran) at four different concentrations (0.25, 0.50, 0.75, and 1.00% w/w) on the physicochemical, textural, rheological and organoleptic properties of model chicken liver pâté (CLP) samples. Overall, the highest hardness and viscoelastic moduli values of the CLP samples were reported when κ-carrageenan and furcellaran were utilized at a concentration of 0.75% w/w (p < 0.05). Furthermore, increasing the concentrations of the utilized hydrocolloids led to increase in the viscoelastic moduli and hardness values of CLP. Compared to the control sample, an increase in spreadability was reported in the CLP samples with the addition of hydrocolloids. Finally, the use of algal hydrocolloids proved to be an effective way to modify the techno-functional properties of CLP.

11 December 2023 in LWT
Verified
Journal Article
Open access
MPMarketa Petova
Marketa Petova
ZPZdenek Polášek
Zdenek Polášek
BLBarbora Lapčíková
Barbora Lapčíková
LLLubomir Lapčík
Lubomir Lapčík
LBLeona Buňková
Leona Buňková
František BuňkaFrantišek Buňka
František Buňka

15 April 2025 in Foods
Verified
Journal Article
Open access
PDF file
AVAnna Vincová
Anna Vincová
MPMartina Polaskova
Martina Polaskova
MSMartin Stěnička
Martin Stěnička
KŠKristýna Šantová
Kristýna Šantová
VKVendula Kůrová
Vendula Kůrová
Richardos Nikolaos SalekRichardos Nikolaos Salek
Richardos Nikolaos Salek
The current study investigated the impact of two-stage water addition on the selected properties of processed cheese (PC). In particular, the above-mentioned novel approach involved adding water in two stages during the PC manufacturing process. The effects of this process on the physicochemical, viscoelastic, textural, tribological, thermal, and organoleptic properties of PC were evaluated. For all examined PC samples, the elastic modulus consistently dominated over the viscous modulus (G′ > G″) across the entire frequency range. Moreover, it was observed that a smaller amount of initial water addition during the melting process resulted in a slight increase in the values of both viscoelastic moduli. The control sample exhibited the lowest lightness values, while it also showed the highest level of yellow coloring, suggesting that the two-stage addition of water affected the color of the PC samples. The results showed that the two-stage addition of water significantly influenced the physicochemical, viscoelastic, textural, tribological, thermal, and organoleptic properties of PC, leading to a modified texture, and thermal stability. Moreover, firmer PC products were obtained when a greater initial water level (first dosage; in the range of 60 to 90%) was utilized. This study could provide valuable information on the development of high-quality PC products with tailored functional properties, which can be important for the dairy industry.

20 March 2025 in Foods
Verified
Journal Article
Open access
Zuzana LazárkováZuzana Lazárková
Zuzana Lazárková
Eva LorencováEva Lorencová
Eva Lorencová
MPMarketa Petova
Marketa Petova
MNMartin Novotný
Martin Novotný
Richardos Nikolaos SalekRichardos Nikolaos Salek
Richardos Nikolaos Salek
Sterilized processed cheese is a dairy product with prolonged shelf life compared to regular processed cheese. The extension of durability is made possible by the thermosterilization of processed cheese, while regular processed cheese is submitted to pasteurization process during manufacturing. Sterilized processed cheese can be classified as long-life foods and their shelf life may reach up to 24 months, if stored at ambient temperature (approx. 25 ± 1 °C). This fact is an advantage over regular processed cheese, which has a shelf life of only around 6 months. Sterilized processed cheese finds application in everyday life when refrigeration facilities are not available; i.e., it is intended for regular retail. However, their most important use is for storage in state material reserves and, moreover, for catering for members of the armed forces and/or members of the integrated rescue system. This review aimed to gather general information on sterilized processed cheeses, their characterization, usage and production. Furthermore, the review discusses the principles of sterilization and factors affecting the course of sterilization focusing on the setting the sterilization limits and sterilization parameters in order to maximize end-product quality. Moreover, last part of the review is devoted to the effect of sterilization and long-term storage on the qualitative parameters of sterilized processed cheese.

12 November 2025 in Foods
Verified
Journal Article
Open access
PDF file
ARAnita Rejdlová
Anita Rejdlová
VKVendula Kůrová
Vendula Kůrová
Eva LorencováEva Lorencová
Eva Lorencová
Zuzana LazárkováZuzana Lazárková
Zuzana Lazárková
LCLucie Cmajdálková
Lucie Cmajdálková
Richardos Nikolaos SalekRichardos Nikolaos Salek
Richardos Nikolaos Salek
The effect of the high-pressure homogenization (HPH) process (one-stage; applied pressure of 10 MPa and 20 MPa) and furcellaran addition (0.25% and 0.50%, w/w) on the physicochemical and rheological properties of chocolate milk drinks was evaluated. Non-homogenized samples and the milk sample used to produce all model chocolate milk drink samples were also evaluated for comparison. The addition of furcellaran and the HPH process significantly influenced the monitored characteristics of the model samples. In particular, the addition of furcellaran caused an increase in shear stress and viscosity, and HPH also had a noticeable effect on these rheological properties. From the results obtained, it can be concluded that the model samples of chocolate milk drinks exhibited a pseudoplastic behavior. Furthermore, the results of the physicochemical analyses showed a slight increase in dry matter and total soluble solids contents due to furcellaran addition. The solid particle sedimentation values of the tested samples decreased due to furcellaran addition (up to 11.99%.). In addition to the effect on rheological properties, the HPH regime slightly increased the sample’s pH values (6.80–6.81). The application of HPH and furcellaran addition may appear advantageous in manufacturing chocolate milk drinks (or dairy-based suspensions) with enhanced physical, flow and sensory properties.