Saptarsi Ghosh

Dr. Saptarsi Ghosh


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 February 2023 in Semiconductor Science and Technology
Verified
Journal Article
Open access
PDF file
SGSaptarsi Ghosh
Saptarsi Ghosh
AHAlexander M Hinz
Alexander M Hinz
MFMartin Frentrup
Martin Frentrup
SASaiful Alam
Saiful Alam
DWDavid J Wallis
David J Wallis
RORachel Oliver
Rachel Oliver
For the growth of low-defect crack-free GaN heterostructures on large-area silicon substrates, compositional grading of AlGaN is a widely adapted buffer technique to restrict the propagation of lattice-mismatch induced defects and balance the thermal expansion mismatch-induced tensile stress. So far, a consolidation of the design strategy of such step-graded buffers has been impaired by the incomplete understanding of the effect of individual buffer design parameters on the mechanical and microstructural properties of the epilayers. Herein, we have analyzed a series of metal-organic chemical vapor deposition grown GaN/graded-AlGaN/AlN/Si heterostructures through in situ curvature measurements and post-growth x-ray diffraction (XRD). Our results reveal that in such epi structures, the GaN layer itself induces more compressive stress than the AlGaN buffer, but the underlying AlGaN layers dictate the magnitude of this stress. Furthermore, for a fixed AlGaN buffer thickness, the mean-stress accumulated during the GaN growth is found to be correlated with its structural properties. Specifically, one µm thick GaN layers that acquire 1.50 GPa or higher compressive mean-stress are seen to possess 20 2 ˉ 1 XRD ω-FWHM values less than 650 arc-sec. Also, the evolution of instantaneous stresses during the growth of the AlGaN layers is found to be a valuable indicator for buffer optimization, and composition difference between successive layers is established as a crucial criterion. The results also show that increasing the total buffer thickness (for a fixed number of steps) or increasing the number of steps (for a fixed total buffer thickness) may not always be beneficial. Irrespective of the buffer thickness, optimized high electron mobility transistor structures show similarly low sheet-resistance (∼350 Ω □)−1 and high mobility (∼2000 cm2 V−1 s −1) at room temperature.

25 January 2021 in ACS Applied Electronic Materials
Verified
Journal Article
Open access
SGSaptarsi Ghosh
Saptarsi Ghosh
AHAlexander Hinz
Alexander Hinz
SFSimon M. Fairclough
Simon M. Fairclough
BSBogdan F. Spiridon
Bogdan F. Spiridon
AEAbdalla Eblabla
Abdalla Eblabla
DWDavid J. Wallis
David J. Wallis
The performance of transistors designed specifically for high-frequency applications is critically reliant upon the semi-insulating electrical properties of the substrate. The suspected formation of a conductive path for radio frequency (RF) signals in the highly resistive (HR) silicon substrate itself has been long held responsible for the suboptimal efficiency of as-grown GaN high electron mobility transistors (HEMTs) at higher operating frequencies. Here, we reveal that not one but two discrete channels distinguishable by their carrier type, spatial extent, and origin within the metal-organic vapor phase epitaxy (MOVPE) growth process participate in such parasitic substrate conduction. An n-type layer that forms first is uniformly distributed in the substrate, and it has a purely thermal origin. Alongside this, a p-type layer is localized on the substrate side of the AlN/Si interface and is induced by diffusion of group-III element of the metal-organic precursor. Fortunately, maintaining the sheet resistance of this p-type layer to high values (∼2000 Ω/□) seems feasible with particular durations of either organometallic precursor or ammonia gas predose of the Si surface, i.e., the intentional introduction of one chemical precursor just before nucleation. It is proposed that the mechanism behind the control actually relies on the formation of disordered AlSiN between the crystalline AlN nucleation layer and the crystalline silicon substrate.

23 January 2025 in Advanced Materials
Verified
Journal Article
Open access
SGSaptarsi Ghosh
Saptarsi Ghosh
MFMartin Frentrup
Martin Frentrup
AHAlexander M. Hinz
Alexander M. Hinz
JPJames W. Pomeroy
James W. Pomeroy
DFDaniel Field
Daniel Field
RORachel A. Oliver
Rachel A. Oliver
Thick metamorphic buffers are considered indispensable for III‐V semiconductor heteroepitaxy on large lattice and thermal‐expansion mismatched silicon substrates. However, III‐nitride buffers in conventional GaN‐on‐Si high electron mobility transistors (HEMT) impose a substantial thermal resistance, deteriorating device efficiency and lifetime by throttling heat extraction. To circumvent this, a systematic methodology for the direct growth of GaN after the AlN nucleation layer on six‐inch silicon substrates is demonstrated using metal‐organic vapor phase epitaxy (MOVPE). Crucial growth‐stress modulation to prevent epilayer cracking is achieved even without buffers, and threading dislocation densities comparable to those in buffered structures are realized. The buffer‐less design yields a GaN‐to‐substrate thermal resistance of (11 ± 4) m 2 K GW −1 , an order of magnitude reduction over conventional GaN‐on‐Si and one of the lowest on any non‐native substrate. As‐grown AlGaN/AlN/GaN heterojunctions on this template show a high‐quality 2D electron gas (2DEG) whose room‐temperature Hall‐effect mobility exceeds 2000 cm 2 V −1 s −1 , rivaling the best‐reported values. As further validation, the low‐temperature magnetoresistance of this 2DEG shows clear Shubnikov‐de‐Haas oscillations, a quantum lifetime > 0.180 ps, and tell‐tale signatures of spin‐splitting. These results could establish a new platform for III‐nitrides, potentially enhancing the energy efficiency of power transistors and enabling fundamental investigations into electron dynamics in quasi‐2D wide‐bandgap systems.

22 July 2024 in Journal of Applied Physics
Verified
Journal Article
Open access
PDF file
SGSaptarsi Ghosh
Saptarsi Ghosh
MSM. Sarkar
M. Sarkar
MFM. Frentrup
M. Frentrup
MKM. J. Kappers
M. J. Kappers
RORachel Oliver
Rachel Oliver
Distributed Bragg reflectors (DBRs) based on alternating layers of porous and non-porous GaN have previously been fabricated at the wafer-scale in heteroepitaxial GaN layers grown on sapphire substrates. Porosification is achieved via the electrochemical etching of highly Si-doped layers, and the etchant accesses the n+-GaN layers through nanoscale channels arising at threading dislocations that are ubiquitous in the heteroepitaxial growth process. Here, we show that the same process applies to GaN multilayer structures grown on silicon substrates. The reflectance of the resulting DBRs depends on the voltage at which the porosification process is carried out. Etching at higher voltages yields higher porosities. However, while an increase in porosity is theoretically expected to lead to peak reflectance, in practice, the highest reflectance is achieved at a moderate etching voltage because etching at higher voltages leads to pore formation in the nominally non-porous layers, pore coarsening in the porous layers, and in the worst cases layer collapse. We also find that at the high threading dislocation densities present in these samples, not all dislocations participate in the etching process at low and moderate etching voltages. However, the number of dislocations involved in the process increases with etching voltage.

30 August 2023 in ACS Photonics
Verified
Journal Article
Open access
XCXingrui Cheng
Xingrui Cheng
NWNils Kolja Wessling
Nils Kolja Wessling
SGSaptarsi Ghosh
Saptarsi Ghosh
AKAndrew R. Kirkpatrick
Andrew R. Kirkpatrick
MKMenno J. Kappers
Menno J. Kappers
Michael StrainMichael Strain
Michael Strain
Effective light extraction from optically active solid-state spin centers inside high-index semiconductor host crystals is an important factor in integrating these pseudo-atomic centers in wider quantum systems. Here, we report increased fluorescent light collection efficiency from laser-written nitrogen-vacancy (NV) centers in bulk diamond facilitated by micro-transfer printed GaN solid immersion lenses. Both laser-writing of NV centers and transfer printing of micro-lens structures are compatible with high spatial resolution, enabling deterministic fabrication routes toward future scalable systems development. The micro-lenses are integrated in a noninvasive manner, as they are added on top of the unstructured diamond surface and bonded by van der Waals forces. For emitters at 5 mu m depth, we find approximately 2x improvement of fluorescent light collection using an air objective with a numerical aperture of NA = 0.95 in good agreement with simulations. Similarly, the solid immersion lenses strongly enhance light collection when using an objective with NA = 0.5, significantly improving the signal-to-noise ratio of the NV center emission while maintaining the NV's quantum properties after integration.

5 April 2024 in Microscopy and Microanalysis
Verified
Journal Article
Open access
PDF file
MSMaruf Sarkar
Maruf Sarkar
FAFrancesca Adams
Francesca Adams
SDSidra A Dar
Sidra A Dar
JPJordan Penn
Jordan Penn
YJYihong Ji
Yihong Ji
RORachel Oliver
Rachel Oliver
In this article, porous GaN distributed Bragg reflectors (DBRs) were fabricated by epitaxy of undoped/doped multilayers followed by electrochemical etching. We present backscattered electron scanning electron microscopy (BSE-SEM) for sub-surface plan-view imaging, enabling efficient, non-destructive pore morphology characterization. In mesoporous GaN DBRs, BSE-SEM images the same branching pores and Voronoi-like domains as scanning transmission electron microscopy. In microporous GaN DBRs, micrographs were dominated by first porous layer features (45 nm to 108 nm sub-surface) with diffuse second layer (153 nm to 216 nm sub-surface) contributions. The optimum primary electron landing energy (LE) for image contrast and spatial resolution in a Zeiss GeminiSEM 300 was approximately 20 keV. BSE-SEM detects porosity ca. 295 nm sub-surface in an overgrown porous GaN DBR, yielding low contrast that is still first porous layer dominated. Imaging through a ca. 190 nm GaN cap improves contrast. We derived image contrast, spatial resolution, and information depth expectations from semi-empirical expressions. These theoretical studies echo our experiments as image contrast and spatial resolution can improve with higher LE, plateauing towards 30 keV. BSE-SEM is predicted to be dominated by the uppermost porous layer’s uppermost region, congruent with experimental analysis. Most pertinently, information depth increases with LE, as observed.