Eduardo Alfredo Anselmi Palma

Dr. Eduardo Alfredo Anselmi Palma

orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 April 2014 in Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
Verified
Journal Article
Closed access
WCWilliam Camilleri
William Camilleri
EPEduardo Alfredo Anselmi Palma
Eduardo Alfredo Anselmi Palma
BSBobby Sethi
Bobby Sethi
PLPanagiotis Laskaridis
Panagiotis Laskaridis
ARAndrew Rolt
Andrew Rolt
PCPedro Cobas
Pedro Cobas
Intercooled turbofan cycles allow higher overall pressure ratios to be reached, which gives rise to improved thermal efficiency. In addition, intercooling allows for the size, weight and exhaust jet velocity of the core to be reduced. For an optimum jet velocity ratio and fixed thrust, the fan pressure ratio and specific thrust are also reduced, which benefits propulsive efficiency. A new intercooled core concept is proposed in this paper, which promises to alleviate limitations identified in previous intercooled turbofan designs. This concept facilitates the installation of the intercooler and reduces core losses at high overall pressure ratios. This engine concept takes advantage of intercooling and the arrangement of the high pressure spool to reach and exceed overall pressure ratios of 80. In addition, given the reduction in core size, bypass ratios beyond 14 have been considered. In order to identify efficiency gains and performance characteristics which are due to the novel arrangement alone, the geared intercooled reversed flow core engine has been compared with a geared intercooled engine with a more conventional core. Finally an optimisation exercise has been carried out to identify the best configuration for both the geared intercooled reversed flow core concept and the conventional core concept. In this paper, it is demonstrated that the geared intercooled reversed flow core concept allows for a 2.3% reduction in block fuel burn. The reductions are due to the improved core efficiency, higher overall pressure ratio as well as efficiency gains from the use of a mixed exhaust. The sensitivity analysis shows that the improvements are highly dependent on pressure losses in the core and bypass stream and that careful design of the mixer chutes and intercooler headers to achieve low losses is essential if the concept gains are to be realised.

20 November 2014 in Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
Verified
Journal Article
Closed access
WCWilliam Camilleri
William Camilleri
EPEduardo Alfredo Anselmi Palma
Eduardo Alfredo Anselmi Palma
BSBobby Sethi
Bobby Sethi
PLPanagiotis Laskaridis
Panagiotis Laskaridis
TGTomas Grönstedt
Tomas Grönstedt
PCPedro Cobas
Pedro Cobas
Intercooled turbofan cycles allow higher overall pressure ratios to be reached which gives rise to improved thermal efficiency. Intercooling also allows core mass flow rate to be reduced which facilitates higher bypass ratios. A new intercooled core concept is proposed in this paper which promises to alleviate limitations identified with previous intercooled turbofan designs. Specifically, these limitations are related to core losses at high overall pressure ratios as well as difficulties with the installation of the intercooler. The main features of the geared intercooled reversed flow core engine are described. These include an intercooled core, a rear-mounted high-pressure spool fitted rearwards of the low-pressure spool as opposed to concentrically as well as a mixed exhaust. In these studies, the geared intercooled reversed flow core engine has been compared with a geared intercooled straight flow core engine with a more conventional core layout. This paper compares the mechanical design of the high-pressure spools and shows how different high-pressure compressor and high-pressure turbine blade heights can affect over-tip leakage losses. In the reversed configuration, the reduction in high-pressure spool mean diameter allows for taller high-pressure compressor and turbine blades to be adopted which reduces over-tip leakage losses. The implication of intercooler sizing and configuration, including the impact of different matrix dimensions, is assessed for the reversed configuration. It was found that a 1-pass intercooler would be more compact although a 2-pass would be less challenging to manufacture. The mixer performance of the reversed configuration was evaluated at different levels of mixing effectiveness. This paper shows that the optimum ratio of total pressure in the mixing plane for the reversed flow core configuration is about 1.02 for a mixing effectiveness of 80%. Lower mixing effectiveness would result in a higher optimum ratio of total pressure in the mixing plane and fan pressure ratio.

1 May 2019 in Thermal Science and Engineering Progress
Verified
Journal Article
Open access
BCBjorn Cleton
Bjorn Cleton
EPEduardo Alfredo Anselmi Palma
Eduardo Alfredo Anselmi Palma
APAlvise Pellegrini
Alvise Pellegrini
VPVassilios Pachidis
Vassilios Pachidis
Panagiotis LaskaridisPanagiotis Laskaridis
Panagiotis Laskaridis

25 August 2023 in E3S Web of Conferences
Verified
Conference Paper
Open access
PDF file
LBLapo Bufalari
Lapo Bufalari
EPEduardo Alfredo Anselmi Palma
Eduardo Alfredo Anselmi Palma
MRMirko Rinchi
Mirko Rinchi
KHKevin Howard
Kevin Howard
LTLorenzo Talluri
Lorenzo Talluri
DFDaniele Fiaschi
Daniele Fiaschi
This paper describes the current efforts to develop and manufacture a first prototype for a boundary layer pump as a mean to assess future and more complex designs. Following an approach of “learning by doing”, a previous design was re-assessed from a mechanical/workshop point of view. Budget constraints and in-house manufacturing capabilities were taken into consideration to deliver a new design, suitable for quick production. Challenges such as disc holding, gap spacing, pump intake, discharge nozzles, and tolerances were addressed. Structural analysis has been conducted; where every single component has been modelled and sized accordingly to standard practices. As a support of structural analysis, FEM analysis was also performed with the aim of identifying, discussing, and fixing any potentially critical issues, particularly regarding the bolts holding together the discs into the power shaft. Finally, modal analysis was performed in order to test the dynamic response of the rotor: its critical frequencies would be far from the working range of the machine. This paper gives an overview of the critical issues to be taken into account during the mechanical design of boundary layer pump prototypes for different working fluids in the field of power generation and thermal management.

3 February 2023 in Designs
Verified
Journal Article
Open access
PDF file
RFRosa Freschi
Rosa Freschi
ABAgapi Bakogianni
Agapi Bakogianni
DRDavid John Rajendran
David John Rajendran
EPEduardo Alfredo Anselmi Palma
Eduardo Alfredo Anselmi Palma
Lorenzo TalluriLorenzo Talluri
Lorenzo Talluri
IOANNIS ROUMELIOTISIOANNIS ROUMELIOTIS
IOANNIS ROUMELIOTIS
Boundary layer pumps, although attractive due to their compactness, robustness and multi-fluid and phase-handling capability, have been reported to have low experimental efficiencies despite optimistic predictions from analytical models. A lower-order flow-physics-based analytical model that can be used as a 1D design code for sizing and predicting pump performance is described. The rotor component is modelled by means of the Navier–Stokes equations as simplified using velocity profiles in the inter-disk gap, while the volute is modelled using kinetic-energy-based coefficients inspired by centrifugal pumps. The code can predict the rotor outlet and overall pump pressure ratio with an around 3% and 10% average error, respectively, compared to the reference experimental data for a water pump. Moreover, 3D RANS flow-field explorations of the rotor are carried out for different inter-disk gaps to provide insights concerning the improvement of the 1D design code for the better prediction of the overall pump performance. Improvements in volute loss modelling through the inclusion of realistic flow properties at the rotor outlet rather than the detailed resolution of the velocity profiles within the rotor are suggested as guidelines for improved predictions. Such improved design codes could close the gap between predictions and experimental values, thereby paving the way for the appropriate sizing of boundary layer pumps for several applications, including aircraft thermal management.

Verified
Journal Article
Open access
PDF file
JSJon Ander Serna
Jon Ander Serna
EPEduardo Alfredo Anselmi Palma
Eduardo Alfredo Anselmi Palma
SRStefania Macarena Romero Renteria
Stefania Macarena Romero Renteria
DFDIMITRIOS FOUFLIAS
DIMITRIOS FOUFLIAS
Pericles PilidisPericles Pilidis
Pericles Pilidis
Nuclear power continues to hold great promise in the green revolution, however public opinion regarding its deployment is mixed. A submersible nuclear power station concept is presented here that is expected to allay many concerns that are holding back the growth of nuclear power. This submersible can move under its own power during emergencies and routine maintenance. Being stationed at sea it is earthquake proof. In the case of a tsunami it could decouple from the coast and sail to a location several miles to deeper waters in less than 30 min. Furthermore, it could be built, commissioned, maintained, refueled and scrapped in a country like the UK. This makes it proliferation-proof, a key concern with the wider deployment of nuclear power. In the present evaluation the philosophy and the electric power generation capability of the submersible power station are investigated. This includes a pre-feasibility visualization of the design. An evaluation is carried out into fitting it in a submersible of a size similar to the largest existing nuclear submarines. These designs may enable it to deliver 0.6 to 1 GW of electrical power.