Duygu Yeşiltepe Özçelik

Mrs. Duygu Yeşiltepe Özçelik

ORCID
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 January 2022 in Metals
Verified
Journal Article
Open access
PDF file
Duygu Yeşiltepe ÖzçelikDuygu Yeşiltepe Özçelik
Duygu Yeşiltepe Özçelik
Burcak EbinBurcak Ebin
Burcak Ebin
Srecko StopicSrecko Stopic
Srecko Stopic
SGSebahattin Gürmen
Sebahattin Gürmen
Bernd FriedrichBernd Friedrich
Bernd Friedrich
Mixed oxides have received remarkable attention due to the many opportunities to adjust their interesting structural, electrical, catalytic properties, leading to a better, more useful performance compared to the basic metal oxides. In this study, mixed oxides NiO/ZnO/Al2O3 were synthesized in a single step via the ultrasonic spray pyrolysis method using nitrate salts, and the temperature effects of the process were investigated (400, 600, 800 °C). The synthesized samples were characterized by means of scanning electron microscopy, energy-dispersive spectroscopy, X-ray diffraction and Raman spectroscopy analyses. The results showed Al2O3, NiO–Al2O3 and ZnO–Al2O3 systems with spinel phases. Furthermore, the Raman peaks supported the coexistence of oxide phases, which strongly impact the overall properties of nanocomposite.

25 July 2025 in Minerals
Verified
Journal Article
Open access
PDF file
Furkan NazlıFurkan Nazlı
Furkan Nazlı
IHIşıl Hasdemir
Işıl Hasdemir
EUEmircan Uysal
Emircan Uysal
HDHalide Nur Dursun
Halide Nur Dursun
UGUtku Orçun Gezici
Utku Orçun Gezici
SGSebahattin Gürmen
Sebahattin Gürmen
Lithium-ion batteries (LiBs) are utilized in numerous applications due to advancements in technology, and the recovery of end-of-life (EoL) LiBs is imperative for environmental and economic reasons. Pyrometallurgical and hydrometallurgical methods have been used in the recovery of metals such as Li, Co, and Ni in the EoL LiBs. Hydrometallurgical methods, which have been demonstrated to exhibit higher recovery efficiency and reduced energy consumption, have garnered increased attention in recent research. Inorganic acids, including HCl, HNO3, and H2SO4, as well as organic acids such as acetic acid and citric acid, are employed in the hydrometallurgical recovery of these metals. It is imperative to acknowledge the environmental hazards posed by these acids. Consequently, solvometallurgical processes, which involve the use of organic solvents with minimal or no water, are gaining increasing attention as alternative or complementary techniques to conventional hydrometallurgical processes. In the context of solvent systems that have been examined for a range of solvometallurgical methods, deep eutectic solvents (DESs) have garnered particular interest due to their low toxicity, biodegradable nature, tunable properties, and efficient metal recovery potential. In this study, the leaching process of black mass containing graphite, LCO, NMC, and LMO was carried out in a short time using the ternary DES system. The ternary DES system consists of choline chloride (ChCl), glycolic acid (GLY), and ascorbic acid (AA). As a result of the leaching process of cathode powders in the black mass without any pre-enrichment process, Li, Co, Ni, and Mn elements passed into solution with an efficiency of over 95% at 60 °C and within 1 h. Moreover, the kinetics of the leaching process was investigated, and Density Functional Theory (DFT) calculations were used to explain the leaching mechanism.

28 October 2021 in Reaction Kinetics, Mechanisms and Catalysis
Verified
Journal Article
Closed access
PDF file
SASemih Ates
Semih Ates
DTDoğaç TARI
Doğaç TARI
ŞSŞerzat Safaltın
Şerzat Safaltın
BKBurak Küçükelyas
Burak Küçükelyas
Duygu Yeşiltepe ÖzçelikDuygu Yeşiltepe Özçelik
Duygu Yeşiltepe Özçelik
SGSebahattin Gürmen
Sebahattin Gürmen

23 May 2025 in Journal of Sol-Gel Science and Technology
Verified
Journal Article
Open access
PDF file
Duygu Yeşiltepe ÖzçelikDuygu Yeşiltepe Özçelik
Duygu Yeşiltepe Özçelik
UBUtku Burgun
Utku Burgun
FKFaruk Kaya
Faruk Kaya
EUEmircan Uysal
Emircan Uysal
BDBora Derin
Bora Derin
SGSebahattin Gürmen
Sebahattin Gürmen
CO2 levels in the atmosphere are increasing as a result of human activities such as industrial activities, fossil fuel usage, and deforestation. The CO2 methanation reaction, which converts CO2 into methane, may play a crucial role in addressing this issue. Like most commercial syntheses, the CO2 methanation process requires a catalyst. Spinel catalysts, particularly magnesium aluminate (MgAl2O4), have gained attention for their potential in CO2 methanation. In this study, MgAl2O4 nanoparticles were synthesized using a sol–gel method with a molar ratio of Mg:Al = 1:2, and calcined at temperatures ranging from 700 to 900 °C. The structural properties of the nanoparticles were characterized using differential scanning calorimetry, thermogravimetric analysis, Fourier transform infrared spectroscopy, Brunauer-Emmett-Teller analysis, X-ray diffraction, field emission scanning electron microscopy, energy dispersive X-ray spectroscopy, and transmission electron microscopy. The results showed that the particles had nearly spherical morphology, with agglomeration occurring at higher temperatures. The surface area decreased with increasing calcination temperature, from 188 m²/g at 700 °C to 94 m²/g at 900 °C. NiCo-MgAl2O4 catalysts were prepared by impregnation and characterized by CO2 temperature-programmed desorption and hydrogen temperature-programmed reduction. Catalytic performance tests revealed that the NiCo-MgAl2O4 catalyst calcined at 800 °C achieved the highest CO2 conversion (~85%) and methane selectivity. Spent catalyst analysis showed that carbon deposition negatively affected catalyst performance over time. This study emphasizes the role of strong basic sites in CO2 activation and methane formation, suggesting future improvements in catalyst stability. Graphical Abstract

21 February 2026 in Mining, Metallurgy & Exploration
Verified
Journal Article
Open access
PDF file
Duygu Yeşiltepe ÖzçelikDuygu Yeşiltepe Özçelik
Duygu Yeşiltepe Özçelik
EUEmircan Uysal
Emircan Uysal
SGSebahattin Gürmen
Sebahattin Gürmen
In this study, MgAl2O4 spinel supports were synthesized via the solution combustion synthesis (SCS) method and subsequently calcined at 700, 800, and 900 °C to investigate the effect of calcination temperature on their structural and physicochemical properties. Thermogravimetric analysis (TGA) revealed the multi-step decomposition behavior of the precursor, while Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) confirmed the progressive formation and crystallization of the spinel phase with increasing temperature. Textural properties obtained from Brunauer-Emmett-Teller (BET) surface area measurements, together with morphological observations from field-emission scanning electron microscopy coupled with energy dispersive X-ray spectroscopy (FESEM-EDS) and transmission electron microscopy (TEM), demonstrated significant variations in particle size, morphology, and surface area across the calcination series. Among the examined temperatures, the support calcined at 800 °C exhibited the most favorable balance between crystallinity, particle size, and textural properties. These findings highlight the tunability of MgAl2O4 spinel supports through thermal treatment and provide essential insights for their use as robust support materials in catalytic CO2 conversion and methanation processes. Graphical Abstract

24 February 2026 in Mining, Metallurgy & Exploration
Verified
Journal Article
Open access
PDF file
Duygu Yeşiltepe ÖzçelikDuygu Yeşiltepe Özçelik
Duygu Yeşiltepe Özçelik
UBUtku Burgun
Utku Burgun
EUEmircan Uysal
Emircan Uysal
GGGamze Gümüşlü-Gür
Gamze Gümüşlü-Gür
ASAlper Sarıoğlan
Alper Sarıoğlan
SGSebahattin Gürmen
Sebahattin Gürmen
In this study, Ni-based catalysts (Ni, NiFe, and NiCo) were synthesized via wet impregnation method using MgAl 2 O 4 spinel supports calcined at 700, 800, and 900 °C. These supports, previously synthesized and optimized by the solution combustion method, enabled investigation of thermal treatment and bimetallic promotion affect catalytic performance in CO 2 methanation. Structural, morphological, and redox properties were characterized using XRD, BET, FT-IR, SEM-EDS, TEM, H 2 -TPR, CO 2 -TPD, and TGA analyses. Catalytic activity tests under atmospheric pressure revealed that the NiCo catalyst supported on MgAl 2 O 4 calcined at 800 °C exhibited the highest CO 2 conversion and CH 4 selectivity. This enhancement was attributed to improved metal dispersion, stronger metal–support interaction, and synergistic effects between Ni and Co species. These results demonstrate dual impact of support calcination temperature and bimetallic design on methanation efficiency. This work offers valuable insight into the rational design of thermally stable and highly active Ni-based catalysts for efficient CO 2 utilization in methane production. Graphical Abstract