Xiaoben Qi

Dr. Xiaoben Qi


Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 January 2025 in Nanomaterials
Verified
Journal Article
Open access
PDF file
YWYing Wang
Ying Wang
XWXu Wang
Xu Wang
HSHailong Shang
Hailong Shang
XLXiaotong Liu
Xiaotong Liu
YQYu Qi
Yu Qi
NZNing Zhong
Ning Zhong
The TiB2 film exhibits exceptional hardness and chemical stability due to its unique crystal structure and robust covalent bonds, but it also demonstrates high brittleness and poor toughness, which restricts its practical applications in engineering. By appropriately incorporating metal dopants, the toughness of the ceramic matrix can be enhanced without compromising its inherent hardness. In this study, TiB2 films with different nickel contents (0–32.22 at.%) were fabricated through radio frequency magnetron sputtering. The microstructure, chemical composition, phase structure, and mechanical properties were analyzed using scanning electron microscopy, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy and nanoindentation tester. The pure TiB2 film exhibited (0001) and (0002) peaks; however, the addition of nickel resulted in broadening of the (0001) peak and disappearance of the (0002) peak, and no crystalline nickel or other nickel-containing phases could be identified. It was found that the incorporation of nickel refines the grain structure of titanium diboride, with nickel present in an amorphous form at the boundaries of titanium diboride, thereby forming a wrapped structure. The enrichment of nickel at the grain boundary becomes more pronounced as the nickel content is further increased, which hinders the growth of TiB2 grains, resulting in the thinning of columnar crystals and formation of nanocrystalline in the film, and the coating hardness remains above 20 GPa, when the nickel content is less than 10.83 at.%. With the increase in nickel content, titanium diboride exhibited a tendency to form an amorphous structure, while nickel became increasingly enriched at the boundaries, and the coating hardness and elastic modulus decreased. The wrapped microstructure could absorb the energy generated by compressive shear stress through plastic deformation, which should be beneficial to improve the toughness of the coatings. The addition of nickel enhanced the adhesion between the film and substrate while reducing the friction coefficient of the film. Specifically, when the nickel content reached 4.26 at.%, a notable enhancement in both nanohardness and toughness was observed for nanocomposite films.

7 November 2025 in Nanomaterials
Verified
Journal Article
Open access
PDF file
XQXiaoben Qi
Xiaoben Qi
XWXu Wang
Xu Wang
LTlina tang
lina tang
RMRukeye Maimaititaji
Rukeye Maimaititaji
MSMiaoling Shi
Miaoling Shi
YWYing Wang
Ying Wang
A series of TiB2-Ni multilayer films with different Ni layer thicknesses was prepared by magnetron sputtering technology. The effect of Ni layer thickness on the microstructure and mechanical properties of the multilayer films was investigated, and the deformation and fracture mechanisms underlying the observed behavior were analyzed in detail. The results show that all multilayer films exhibit a well-defined layered architecture with sharp interfacial boundaries. Specifically, the Ni layers grow as columnar grains with an average diameter of approximately 10 nm, while the TiB2 layers form a very fine acicular nanocolumnar structure. With the increase in Ni layer thickness, the hardness of the multilayer films shows a decreasing trend, gradually decreasing from 27.3 GPa at a 4 nm Ni thickness to 19.3 GPa at 50 nm. In contrast, the fracture toughness increases gradually from 1.54 MPa·m1/2 to 2.73 MPa·m1/2. This enhancement in toughness is primarily attributed to a transition in the deformation and fracture mechanism. With the increase in Ni layer thickness, the crack propagation mode in the multilayer films gradually changes from the integral propagation penetrating the film layers to the crack deflection propagation within the layers. This transformation is the result of the combined effect of the stress state of each layer and the crack energy dissipation.

13 November 2025 in Coatings
Verified
Journal Article
Open access
PDF file
YWYing Wang
Ying Wang
逸蒋逸风 蒋
逸风 蒋
SYShuaishuai Yan
Shuaishuai Yan
HSHailong Shang
Hailong Shang
XQXiaoben Qi
Xiaoben Qi
NZNing Zhong
Ning Zhong
A series of Cu-Zr nanocrystalline alloy films with varying Zr contents were fabricated via magnetron co-sputtering technology. The effect of Zr content on the microstructure and mechanical properties of the alloy films was investigated, and the strengthening mechanism was revealed. Furthermore, the stability of nanocrystalline alloy films was studied through annealing experiments at different temperatures. The results show that part of the added Zr atoms are dissolved in the Cu lattice to form a solid solution structure of Zr in Cu, while the other part segregates at the grain boundaries. No second-phase compounds or simple substances are formed in the alloy films. The addition of Zr significantly refines the grain size of the alloy films. The hardness of the films exhibits a gradual increase with the elevation of Zr content. The results indicate that there are three main strengthening factors for the alloy films: grain refinement strengthening effect (∆HGB, accounting for exceeding 70%), solid solution strengthening effect (∆HSS, accounting for approximately 20%) and nanocrystalline solute atom pinning strengthening effect (∆HNC,SS, accounting for less than 10%). Among them, the strengthening effect of grain refinement assumes a predominant role. Regarding stability, Zr atoms segregate at the grain boundaries of the alloy films. The segregation becomes more significant as the annealing temperature rises. This segregation of Zr atoms at the grain boundaries can exert a pinning effect on the grain boundaries and impede their migration, thus significantly improving the structural stability of the alloy films.

12 December 2024 in Nanomaterials
Verified
Journal Article
Open access
PDF file
YWYing Wang
Ying Wang
HXHuanqing Xu
Huanqing Xu
YCYulan Chen
Yulan Chen
XQXiaoben Qi
Xiaoben Qi
NZNing Zhong
Ning Zhong
In this work, the Al-Mo nanocrystalline alloy films with Mo contents ranging from 0–10.5 at.% were prepared via magnetron co-sputtering technology. The composition and microstructure of alloy thin films were studied using XRD, TEM, and EDS. The mechanical behaviors were tested through nanoindentation. The weights of each strengthening factor were calculated and the strengthening mechanism of alloy thin films was revealed. The results indicate that a portion of Mo atoms exist in the Al lattice, forming a solid solution of Mo in Al. The other part of Mo atoms tends to segregate at the grain boundaries, and this segregation becomes more pronounced with an increase in Mo content. There are no compounds or second phases present in any alloy films. As the Mo element content increases, the grain size of the alloy films gradually decreases. The hardness of pure aluminum film is 2.2 GPa. The hardness increases with an increase in Mo content. When the Mo content is 10.5 at.%, The hardness of the film increases to a maximum value of 4.9 GPa. The fine grain (∆Hgb), solid solution (∆Hss), and nanocrystalline solute pinning (∆Hnc,ss) are the three main reasons for the increase in the hardness of alloy thin films. The contribution of ∆Hgb is the largest, accounting for over 60% of the total, while the contribution of ∆Hss accounts for about 30%, ranking second. The rest of the increase is due to ∆Hnc,ss.