Electrospinning technique has excellent advantages such as tunable functionality, thin fibers with large surface areas, ease of processing and good physical properties. Electrospinning provides wide usage area with these advantages in biomedical applications. Polylactic acid (PLA) is a biodegradable and biocompatible polymer, so it can be used in various biomedical applications. PLA can be easily electrospun from solution by using different kinds of conventional solvents. Electrospun PLA based nanofibers are used in many biomedical applications such as drug delivery, scaffold for tissue engineering, dressings for wound healing, dental applications etc. This review focuses on electrospun PLA based nanofibers used in biomedical applications in recent years. Future perspectives of electrospun PLA based fibers are also discussed in the last part.
In this study, graphene nanoplatelets were applied to polyester fabrics using the knife‐coating method at different concentrations (50, 100, and 150 g/kg). SEM, DSC, and TGA/DTG analyses were performed. The influence of graphene coating on hydrophobicity and surface roughness was examined by water contact angle (WCA) measurement and root mean square roughness, respectively. Abrasion resistance and tear strength tests were also performed. The effect of graphene used as a filler on the flammability of polyester fabric was evaluated for the first time according to the BS 5852 standard. No significant weight loss (only in the range of 0.4%–1.5%) was observed in the graphene‐coated samples even after 100,000 cycles. While the WCA value was 0 for the uncoated fabric, the blind coating and maximum graphene‐coated sample measured 86° and 95°, respectively. The coating process reduced the roughness of the base fabric, and the decrease continued with the increasing graphene ratio. The tear strength values that were 45.5 N in the warp and 53.6 N in the weft direction in the blind coating, increased to 52.2 and 59.1 N, respectively, at the maximum graphene concentration. Graphene coating enhanced thermal stability, increased hydrophobicity, and improved flame retardancy in the test using a smoldering cigarette.
Herein, composite films were produced by incorporating different amounts (1, 3, 5, and 7%) of barium titanate nanoparticles into the thermoplastic polyurethane matrix using a solution casting method. This study examined the impact of the presence and concentration of a barium titanate additive on morphologic properties, mechanical performance, thermal stability, solar behavior, and wettability of produced film samples. The films were characterized by Fourier transform infrared spectroscopy, differential scanning calorimetry, thermal gravimetric analysis, scanning electron microscope, ultraviolet-visible near-infrared spectrophotometer, water contact angle, and tensile strength measurements. In the present study, the mass loss of samples containing 7% barium titanate was 24% lower than that of the pure polyurethane reference. The increase of barium titanate rate added to polyurethane enhanced the solar reflectance property of the films, including the near-infrared region. As a prominent result, the transmittance value decreased significantly compared to the reference in the ultraviolet region, and it dropped to 3% for the highest additive concentration. The contact angle values of polyurethane films increased by 11–40% depending on the barium titanate addition ratio. The nano additive also positively affected the mechanical performance of the reference polyurethane film by slightly increasing the tensile strength values.
Essential oils are natural insect repellents, which can be microencapsulated and protected by wall materials to provide prolonged protection against insects. The protection and release of these repellents depend on various parameters, including morphology and production conditions. Herein, twenty-seven gum arabic/citronella essential oil (GA/CEO) spray-dried microcapsules were produced by using three wall-to-core ratios (3:1, 4:1, 6:1), three inlet temperatures (120, 150, 180 °C), and three feed rates (1, 2.5, 5 mL/min). The morphology, particle size, encapsulation efficiency, and release rates were evaluated. The insect repellent activity of microcapsules (0.25, 0.5, and 1 g) against Drosophila melanogaster flies was tested. A systematic process optimization was carried out by evaluating the effects of both emulsion concentration and process parameters on the release rates. Microcapsules with smooth surfaces and homogeneous particle sizes were produced. Encapsulation efficiency reached 90% by increasing the inlet temperature and feed rate. Slower release rates (approximately 40%) were achieved with higher concentrations of the wall material and temperatures, generally. Optimal process conditions were determined as a wall-to-core ratio of 4:1, temperatures exceeding 150 °C, and feed rates above 2.5 mL/min. The highest repellent activity achieved was 95%, indicating effectiveness of GA/CEO microcapsules as insect repellent materials.
In this study, a cryogel/nanofiber hybrid material was developed using a new lotus-leaf-inspired strategy. The lotus effect was generated via beaded poly(ε-caprolactone) (PCL) nanofibers produced from the 9 wt% PCL solution with low viscosity and high surface tension via electrospinning. A poly(hydroxyethyl methacrylate) (PHEMA) cryogel layer was constructed through polymerization onto the beaded PCL nanofibrous mat. The thickness of the PHEMA cryogel/beaded PCL nanofiber hybrid material was 3.19 ± 0.07 mm. Morphological characterization studies of the hybrid material were conducted by scanning electron microscopy (SEM). The mean diameter of the beaded PCL nanofibers was 97.22 ± 21.18 nm. The lotus effect created by the beaded PCL nanofibers was investigated by water contact angle (WCA) measurements. The WCA of beadless and beaded PCL nanofibers was 93.42° ± 1.4° and 117.97° ± 5.04°, respectively. The PHEMA cryogel layer was chemically characterized via Fourier transform infrared spectroscopy (FTIR) analysis and the specific groups belonging to 2-hydroxyethyl methacrylate (HEMA) was observed. The porosity of the PHEMA cryogel layer was determined via mercury porosimetry. The total porosity of the PHEMA cryogel was 64.42%, and the pore sizes were in the range of 5–200 µm. Swelling kinetics of the PHEMA cryogel/beaded PCL nanofiber hybrid material were also investigated and compared to those of PHEMA cryogel and beaded PCL nanofibers. The maximum swelling ratio of the hybrid material was 509.69% and reached after 180 min. The developed PHEMA cryogel/beaded PCL nanofiber hybrid material met the criteria required for layered structures and biomedical applications whereby its eligible stability, morphology, porosity, and swelling capacity. Consequently, the lotus-leaf-inspired strategy was successful in constructing the cryogel/nanofiber hybrid materials.
Koruyucu tekstiller modern insan hayatının önemli bir parçası haline gelmiştir. Değişen iklim koşulları ve yaygınlaşan bulaşıcı hastalıklar, insanların koruyucu tekstillere olan ihtiyacını arttırmaktadır. Sivrisinekler, pek çok zararlı organizmayı insanlara taşıyan bu nedenle de hastalıklara ve ölümlere sebep olan böceklerdir. Toplum sağlığı açısından önemli bir tehdit kaynağı oldukları için sivrisineklerden korunma yöntemleri büyük önem arz etmektedir. Sivrisineklere karşı en etkili korunma yöntemi ise, tekstil malzemeleri ile kişisel korunmanın sağlanmasıdır. Sivrisinek kovucu maddelerin çeşitli yöntemlerle, konvansiyonel ve özellikle nanolifli tekstil yüzeylerine dâhil edilmesiyle hem yüksek oranda hem de uzun süre koruyuculuk sağlayan ürünler elde etmek mümkündür. Sivrisinek kovucu maddeler içerisinde doğal yağlar, insan sağlığı ve çevresel etkenler nedeniyle önem kazanmaktadır. Ancak bu maddeler uçucu yapıda oldukları için kalıcılıkları sınırlıdır. Bu nedenle, sivrisinek kovucu maddenin kontrollü salımına ve uzun süreli etkili olmasına olanak sağlayan mikrokapsülasyon teknikleri ön plana çıkmıştır. Bu makalede, sivrisineklerden koruma sağlayan tekstil malzemelerinin üretimi ve etkinliği üzerine yapılan çalışmalar incelenerek detaylı bir şekilde sunulmuştur. Ayrıca; sivrisinek kovucu maddelerin ve tekstil yapılarına entegrasyonunun, koruyuculuk ve toplum/çevre sağlığı üzerindeki etkileri tartışılmıştır.