Essential oils are natural insect repellents, which can be microencapsulated and protected by wall materials to provide prolonged protection against insects. The protection and release of these repellents depend on various parameters, including morphology and production conditions. Herein, twenty-seven gum arabic/citronella essential oil (GA/CEO) spray-dried microcapsules were produced by using three wall-to-core ratios (3:1, 4:1, 6:1), three inlet temperatures (120, 150, 180 °C), and three feed rates (1, 2.5, 5 mL/min). The morphology, particle size, encapsulation efficiency, and release rates were evaluated. The insect repellent activity of microcapsules (0.25, 0.5, and 1 g) against Drosophila melanogaster flies was tested. A systematic process optimization was carried out by evaluating the effects of both emulsion concentration and process parameters on the release rates. Microcapsules with smooth surfaces and homogeneous particle sizes were produced. Encapsulation efficiency reached 90% by increasing the inlet temperature and feed rate. Slower release rates (approximately 40%) were achieved with higher concentrations of the wall material and temperatures, generally. Optimal process conditions were determined as a wall-to-core ratio of 4:1, temperatures exceeding 150 °C, and feed rates above 2.5 mL/min. The highest repellent activity achieved was 95%, indicating effectiveness of GA/CEO microcapsules as insect repellent materials.
27 November 2024 in Journal of Molecular Structure
The chemical resistance of Poly-3,4-ethylenedioxythiophene (PEDOT) was tested in both organic and inorganic solvents including Chloroform, DMSO, Xylene, THF, sulfuric acid, sodium hydroxide and sodium chloride. PEDOT was synthesized via the vapor-phase polymerization and coated on PET/cotton, cotton and polyester textile substrates. Electrical resistances of the PEDOT were measured both before and after chemical treatments. The morphological changes after treatments were studied by scanning electron microscope (SEM). The PEDOT coated fabrics demonstrated excellent chemical-resistant property since its electrical resistance maintained on the order of magnitude of 100 ohm after treatment in almost all the solvents except NaOH with which a remarkable increasing of electrical resistance occurred due to disappearing PEDOT from the substrate indicating its potential to be a good solvent for PEDOT.
Koruyucu tekstiller modern insan hayatının önemli bir parçası haline gelmiştir. Değişen iklim koşulları ve yaygınlaşan bulaşıcı hastalıklar, insanların koruyucu tekstillere olan ihtiyacını arttırmaktadır. Sivrisinekler, pek çok zararlı organizmayı insanlara taşıyan bu nedenle de hastalıklara ve ölümlere sebep olan böceklerdir. Toplum sağlığı açısından önemli bir tehdit kaynağı oldukları için sivrisineklerden korunma yöntemleri büyük önem arz etmektedir. Sivrisineklere karşı en etkili korunma yöntemi ise, tekstil malzemeleri ile kişisel korunmanın sağlanmasıdır. Sivrisinek kovucu maddelerin çeşitli yöntemlerle, konvansiyonel ve özellikle nanolifli tekstil yüzeylerine dâhil edilmesiyle hem yüksek oranda hem de uzun süre koruyuculuk sağlayan ürünler elde etmek mümkündür. Sivrisinek kovucu maddeler içerisinde doğal yağlar, insan sağlığı ve çevresel etkenler nedeniyle önem kazanmaktadır. Ancak bu maddeler uçucu yapıda oldukları için kalıcılıkları sınırlıdır. Bu nedenle, sivrisinek kovucu maddenin kontrollü salımına ve uzun süreli etkili olmasına olanak sağlayan mikrokapsülasyon teknikleri ön plana çıkmıştır. Bu makalede, sivrisineklerden koruma sağlayan tekstil malzemelerinin üretimi ve etkinliği üzerine yapılan çalışmalar incelenerek detaylı bir şekilde sunulmuştur. Ayrıca; sivrisinek kovucu maddelerin ve tekstil yapılarına entegrasyonunun, koruyuculuk ve toplum/çevre sağlığı üzerindeki etkileri tartışılmıştır.
The rapid development of smart and wearable textiles has been driven by the need for smaller and lighter electronic circuits. To make textile surfaces conductive, various methods have been developed, with vapor-phase polymerization being a preferred method due to its smoothness, conductivity, and ease of application. This study investigates the effect of fundamental characteristics of textile fabrics, such as weave type and filament count, on electrical conductivity. Fabrics woven with different filament counts and weave types were coated with PEDOT polymer using vapor-phase polymerization. The results showed that the fabric woven with 150F288 yarns and a 3/1 twill weave exhibited lower electrical resistance, attributed to the microfibrous structure of the yarn and the twill's staggered structure. Despite increases in resistance values after performance tests, the electrical resistance values remained within a sufficient conductivity range. This research contributes to the understanding of how fabric characteristics affect the electrical conductivity of coated textiles, paving the way for the development of smart electronic textiles.