Copper (Cu) in steel production can be a residual element, causing challenges during steel processing, as well as an alloying element, improving corrosion resistance and providing hardenability by nanosized precipitates. For the transition toward a green economy, increased recycling rates in steel production and alternative energy carriers, such as hydrogen, are of vital importance. As hydrogen is known for its embrittling effect on high-strength steels, this work sought to explore possible mitigation strategies for hydrogen embrittlement (HE) with the help of Cu precipitates. Hydrogen trapping at Cu/Fe interfaces following the complex phase transformations in the Cu precipitation sequence from body-centered cubic (bcc) to the so-called 9R structure to face-centered cubic (fcc) was addressed by a series of systematic density functional theory calculations. In combination with thermodynamic calculations, the pressing question regarding which of the precipitate structures was most desirable for the tackling of HE was alluded to. We found that hydrogen trapping at the Cu/Fe interfaces increased from −0.05 to −0.18 eV following the precipitation sequence. Despite this relatively weak hydrogen trapping, which was in the range of dislocations, we showed through thermodynamic calculations that fcc Cu precipitates could still contribute to lowering the risk of triggering the hydrogen-enhanced localized plasticity (HELP) mechanism of HE.
16 April 2024 in BHM Berg- und Hüttenmännische Monatshefte
The analysis of thermal desorption spectra (TDS) and the calculation of hydrogen detrapping activation energies rely on Gaussian peak deconvolution and Choo-Lee plot regression since 1982. However, this method imposes important assumptions about the number and shape of the TDS peaks used for fitting. In this study, we propose the fingerprint method, an alternative approach that eliminates these long-standing constraints. By applying the fingerprint analysis to eight TDS spectra from three different Fe-C model alloys, we demonstrate its exceptional sensitivity and ability to resolve activation energy distributions – the material fingerprint – unattainable with traditional methods. We further showcase by manual and automated analysis how the such obtained fingerprints can be used to uniquely distinguish the TDS spectra of each alloy independent of the heating rate. Thus the fingerprint method also increases experimental efficiency by reducing the amount of necessary heating rates for TDS down to one.
The analysis of thermal desorption spectra (TDS) and the calculation of hydrogen detrapping activation energies rely on Gaussian peak deconvolution and Choo-Lee plot regression since 1982. However, this method imposes important assumptions about the number and shape of the TDS peaks used for fitting.In this study, we propose the fingerprint method, an alternative approach that eliminates these long-standing constraints. By applying the fingerprint analysis to eight TDS spectra from three different Fe-C model alloys, we demonstrate its exceptional sensitivity and ability to resolve activation energy distributions -- the material fingerprint -- unattainable with traditional methods. We further showcase by manual and automated analysis how the such obtained fingerprints can be used to uniquely distinguish the TDS spectra of each alloy independent of the heating rate. Thus the fingerprint method also increases experimental efficiency by reducing the amount of necessary heating rates for TDS down to one.
29 September 2026 in Materials Science and Engineering: A