Weidong Wang

Dr. Weidong Wang

orcid

Research Focus & Metrics

Academic Career Length

22Years (2005-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 March 2022 in Sensors
Verified
Journal Article
Open access
PDF file
ZZZhiping Zeng
Zhiping Zeng
XHXudong Huang
Xudong Huang
ZLZhuang Li
Zhuang Li
WWWeidong Wang
Weidong Wang
ZSZixiao Shi
Zixiao Shi
ASAbdulmumin Ahmed Ahmed Shuaibu
Abdulmumin Ahmed Ahmed Shuaibu
Objective: The cast-in-place steel spring floating slab track (SSFST) is difficult to maintain and repair, while the mechanical strength of the end of the traditional prefabricated SSFST is poor. In order to overcome the above shortcomings, a shear-hinge-combined prefabricated SSFST was developed, and an indoor test was carried out to analyze its vibration-damping effect. Methods: A combined shear hinge SSFST connection model with two length sizes was established. The dynamic response amplitude and frequency response characteristics of the foundation (ground) under different isolator installations and fatigue loads were studied, and the vibration-damping performance of two sizes of combined shear hinge SSFST was evaluated. Results: The vibration-damping effect of the steel spring vibration isolator mainly acts in the middle and low-frequency bands of 16–400 Hz, and the vibration near 10 Hz will be aggravated after the vibration isolator is installed. The vibration index and variation law of the two sizes of SSFST are similar, and the vibration response of 4.8 m SSFST is slightly less than 3.6 m SSFST. There is almost no change in each index when the load is 5 million times, and there is a certain range of change when the load is 10 million times, but the overall change is small. Conclusions: The combined shear hinge prefabricated SSFST can have an excellent isolation effect on vibration and can still maintain good vibration-damping ability within 10 million fatigue loads (about 5 years); 4.8 m SSFST should be laid in straight sections with higher train speeds, while 3.6 m SSFST should be applied in curved sections to ensure smooth lines.

10 March 2022 in Materials
Verified
Journal Article
Open access
PDF file
ZZZhiping Zeng
Zhiping Zeng
YXYancai Xiao
Yancai Xiao
WWWeidong Wang
Weidong Wang
ZHZhibin Huang
Zhibin Huang
WWWei Wei
Wei Wei
SHSaidi Boumedienne Houdou
Saidi Boumedienne Houdou
To fill the blank in the research on the dynamic performance of track structure under long-term service, the dynamic response study of China Railway Track System Ⅲ type slab ballastless track (CRTSIII SBT) under the action of fatigue for 30 million times and the parting between track slab and self-compacting concrete (SCC) was carried out. By establishing the finite element model of the CRTSIII SBT structure and taking the stiffness change of isolation layer and fastener under fatigue state and the parting during service as the research objects, combined with the full-scale model test, the dynamic response amplitude and vibration law of track structure was analyzed based on the finite element model of axle falling test method. The results show the following: (1) Under the fatigue load, the acceleration of rail and base increases obviously, the longitudinal tensile stress of SCC surface decreases, the longitudinal tensile stress of base surface increases, and the vertical stress of each layer of track structure increases as well. (2) Under the action of the parting, the dynamic response of each structural layer increases, and the change of acceleration and stress of each layer under the action point of axle falling is the most obvious. (3) The fatigue load will weaken the vibration damping performance of the track, and the parting will continue to develop under the action of the falling axle, resulting in partial or total failure of the SCC layer. Both of them will aggravate the dynamic response of the track structure and affect driving safety, which should be paid attention to during maintenance.

20 January 2022 in Materials
Verified
Journal Article
Open access
PDF file
ZZZhiping Zeng
Zhiping Zeng
GPGuangzhao Peng
Guangzhao Peng
WWWeidong Wang
Weidong Wang
XHXiangdong Huang
Xiangdong Huang
SSShiwen Shen
Shiwen Shen
MYMengxuan Ye
Mengxuan Ye
The CRTS I type double-block ballastless track (CRTS I TDBBT) has the advantages of convenient construction and low cost, but it has low crack resistance and the temperature field distribution of the railway on the bridge is uneven and frequently changes, so it is necessary to study the mechanical properties of the CRTS I TDBBT under the load of a temperature field. The temperature field model of the CRTS I TDBBT on the bridge is established by finite element software, the real-time temperature field of the track bed slab is brought into the coupled model as a load, and the variation laws of the temperature stress of the CRTS I TDBBT under different schemes are compared. The temperature gradient in the CRTS I TDBBT track bed slab has the largest fluctuation range, and the positive and negative temperature gradient range can reach 93.34 °C. For the temperature longitudinal stress around the sleeper block of the track bed slab, the edge is the largest; the temperature longitudinal stress is reduced by at most 5.27% after the anti-cracking diagonal bars are added. When the expansion joint is added, the temperature stress can be reduced by up to 80.29%. The fluctuation range of the temperature gradient of the track bed is basically consistent with the fluctuation range of the local air temperature. The huge temperature difference leads to the occurrence of cracks in the track structure, and cracks are more likely to occur at the corners of the sleeper block. The addition of both anti-crack diagonal bars and expansion joints has an anti-crack effect, but the effect of adding expansion joints is better.

13 December 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
ZZZhiping Zeng
Zhiping Zeng
YXYancai Xiao
Yancai Xiao
WWWeidong Wang
Weidong Wang
XHXudong Huang
Xudong Huang
XDXiang-Gang Du
Xiang-Gang Du
JWJun-Dong Wang
Jun-Dong Wang
Background: In order to study the applicability of Low Vibration Track (LVT) in heavy-haul railway tunnels, this paper carried out research on the dynamic effects of LVT heavy-haul railway wheels and rails and provided a technical reference for the structural design of heavy-haul railway track structures. Methods: Based on system dynamics response sensitivity and vehicle-track coupling dynamics, the stability of the upper heavy-haul train, the track deformation tendency, and the dynamic response sensitivity of the vehicle-track system under the influence of random track irregularity and different track structure parameters were calculated, compared and analyzed. Results: Larger under-rail lateral and vertical structural stiffness can reduce the dynamic response of the rail system. The vertical and lateral stiffness under the block should be set within a reasonable range to achieve the purpose of reducing the dynamic response of the system, and beyond a certain range, the dynamic response of the rail system will increase significantly, which will affect the safety and stability of train operation. Conclusions: Considering the changes of track vehicle body stability coefficients, the change of deformation control coefficients, and the sensitivity indexes of dynamic performance coefficients to track structure stiffness change, the recommended values of the vertical stiffness under rail, the lateral stiffness under rail, the vertical stiffness under block, and the lateral stiffness under block are, respectively 160 kN/mm, 200 kN/mm, 100 kN/mm, and 200 kN/mm.

18 May 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
XHXudong Huang
Xudong Huang
ZZZhiping Zeng
Zhiping Zeng
ZLZhuang Li
Zhuang Li
WWWeidong Wang
Weidong Wang
YYYU YUAN
YU YUAN
HBHoudou Saidi Boumedienne
Houdou Saidi Boumedienne
Purpose: Steel-spring-floating slab tracks are widely used in subway lines. It is necessary to analyze and study the vibration damping and transmission characteristics of the steel-spring-floating slab track in various frequency bands under the action of train loads. Method: A steel-spring-floating slab track and ordinary monolithic track tunnel sites with similar line conditions on straight and curved segments were selected. The vibration signals of rail, track bed, and tunnel walls were collected and the analysis results of vibration damping and vibration transmission between the steel-spring-floating slab track and the ordinary monolithic track were compared. Results: The dynamic responses of the rail in the four working conditions are relatively close, and the acceleration of the steel-spring-floating slab track bed is significantly larger than that of the ordinary monolithic track. The vibration response generated in the curved segment is significantly greater, and each frequency band will generate more peak points, and the high-frequency vibration will be more severe. Conclusions: The steel-spring-floating slab track can significantly reduce the acceleration response of the tunnel wall; the bottom constraint of the steel-spring-floating slab track is less, and the vibration response of the track bed is more severe.

2 April 2025 in Materials
Verified
Journal Article
Open access
PDF file
MHMarui Han
Marui Han
ZZZhiping Zeng
Zhiping Zeng
QLQiuyi Li
Qiuyi Li
PLPeicheng Li
Peicheng Li
WWWei Wei
Wei Wei
ASAbdulmumin Ahmed Shuaibu
Abdulmumin Ahmed Shuaibu
CRTS III (China Railway Track System) slab track is a typical multi-layer composite structure. Door-shaped rebar is an important connecting component. Studying its service characteristics is crucial for disease prevention and control. To investigate the mechanical properties of door-shaped rebar under multi-factor coupling, a three-dimensional finite element model was developed and validated with full-scale tests. Then, considering the initial defects of self-compacting concrete (SCC), interlayer cracks and other damages, the mechanical properties of door-shaped rebar of a CRTS III slab track under temperature load were studied. The results show that under the action of an extreme temperature gradient, the maximum vertical displacement of the track slab occurs in the middle and corner positions of the slab with the positive temperature gradient, with displacement values of 0.87 mm and -0.99 mm respectively. Under positive and negative temperature gradients, the stress of the door-shaped rebar at the interface between the track slab and the SCC layer is 12.9 MPa and 16.5 MPa, respectively. When considering the conditions of the SCC slurry layer, the stress of the door-shaped rebar in the SCC layer under the action of a temperature gradient is generally in an increasing state. When there is a crack at the interface of the SCC layer, the stress of the door-shaped rebar unit in the crack area changes significantly, and the crack at the edge of track slab has the greatest impact on the stress of the door-shaped rebar under the positive temperature gradient, which is 157.9 MPa. The research results provide a theoretical basis for disease control.