Hemocompatible nanoparticles with reactive oxygen species (ROS) scavenging properties for titanium implant surface coatings may eliminate implant failure related to inflammation and bacterial invasion. Cerium (Ce) is a rare earth element, that belongs to the lanthanide group. It exists in two oxidation states, Ce⁺³ and Ce⁺⁴, which contribute to antioxidant, catalytic, antibacterial, and ROS-scavenging properties. The purpose of the present study was to synthesize ceria nanoparticles and to evaluate their hemocompatibility and ROS scavenging properties. The synthesis of Ce-NPs was performed via the sol-gel method, and five different ratios of cerium precursors to gelatin were evaluated. Their characterization was achieved through FTIR, XRD, SEM, and TEM. Hemocompatibility and ROS analysis were evaluated at different concentrations with human erythrocytes. The morphology and size distribution were certified by TEM and the cubic CeO₂ fluorite structure was identified by selected area electron diffraction and high-resolution TEM. The particle size of the lowest Ce concentration presented a mean diameter of 10 nm. At concentrations of <500 μg/mL, no hemolytic effect was observed. At the highest concentrations, no hemolytic behavior was recorded for samples with the highest Ce precursor, which also presented ROS scavenging properties (10–50% reduction in ROS). These properties make those CeO₂ NPs unique candidates as nanofillers or nanocoatings with antibacterial properties.

The microstructure of aluminum thin films, including the grain morphology and surface roughness, are key parameters for improving the thermal or electrical properties and optical reflectance of films. The first step in optimizing these parameters is a thorough understanding of the grain growth mechanisms and film structure. To investigate these issues, thin aluminum films with thicknesses ranging from 25 to 280 nm were coated on SiO_x/Si substrates at ambient temperature under high-vacuum conditions and a low argon pressure of 3 × 10⁻³ mbar (0.3 Pa) using the radio frequency magnetron sputtering method. Quantitative analyses of the surface roughness and nanograin characteristics were conducted using atomic force microscopy (AFM), transmission electron microscopy (TEM), and X-ray diffraction. Changes in specular reflectance were measured using ultraviolet–visible and near-infrared spectroscopy. The low roughness values obtained from the AFM images resulted in high film reflectivity, even for thicker films. TEM and AFM results indicate monomodal, randomly oriented grain growth without a distinct columnar or spherical morphology. Using TEM cross-sectional images and the dependence of the grain size on the film thickness, we propose a grain growth mechanism based on the diffusion mobility of aluminum atoms through grain boundaries.

: In the GaAs/In _x (Al,Ga)_1–x As core/shell nanowire (CSNW) geometry, narrow cores exhibit significant bandgap reduction and enhanced electron mobility because of their ability to sustain extreme tensile elastic strain. In such an elastic state, the coherency limits and the resulting physical properties of the nanowires are governed by the strain field distribution and plastic relaxation mechanisms. Using atomic-resolution transmission electron microscopy, we determined the three-dimensional strain field, critical misfit, and plastic relaxation relative to the indium content of the shell, while maintaining constant core–shell dimensions. The strain was mapped experimentally in both coherent and plastically relaxed nanowires with a core radius of 10 nm and thick shells and was compared to atomistic and continuum calculations. Our findings reveal that, while axial strains remain uniform, elastic relaxation induces radial and tangential strain gradients. This is attributed to the strain concentration at the sharp interfaces, which persisted even after plastic relaxation. For the pertinent growth conditions, the maximum sustained elastic strain in the cores was observed for the GaAs/In_0.5Al_0.5As nanowires. The plastic relaxation of nanowires with shells of high indium content involved Frank partials delimiting horizontal intrinsic stacking faults (SFs), misfit dislocations gliding on inclined close-packed planes, and stair-rod dislocations along SF junction lines attributed to nanowire bending. Ab initio calculations showed that the heterojunction remained type I even for the highest elastic strain, despite the existence of strain gradients at the core–shell interface. Our results elucidate the elastoplastic behaviour of CSNWs with narrow cores, offering new perspectives on growth strategies to further push their coherency limits.

Superhydrophobic materials have clear potential for mitigating rain/humidity-induced damage to cultural heritage. In the present study, the wetting properties of Paraloid B72 were tailored to achieve superhydrophobicity by incorporating modified calcium carbonate (CaCO₃) nanoparticles (NPs). B72 is a well-established conservation product while CaCO₃ is chemically compatible with calcareous materials commonly found in cultural heritage buildings and objects. Initially, the wettabilities of CaCO₃ NPs, functionalised with caproic (C6), caprylic (C8), lauric (C12), myristic (C14), palmitic (C16), and stearic (C18) acid, were evaluated by measuring water contact angles (CAs) on NP pellets. For NPs with short hydrocarbon chains, CA increased with chain length, from 66.3° for CaCO₃-C6 to 118.0° for CaCO₃-C12 NPs. For NPs with longer chains, CA remained stable and around 118°. Based on these results, CaCO₃-C12 NPs were selected for further investigation and subjected to transmission electron microscopy analysis, which revealed chain-like agglomerates of aggregated nanocrystallites (5–10 nm) forming 40–150 nm polycrystalline NPs. Scanning transmission electron microscopy combined with elemental mapping revealed a homogeneous distribution of Ca, C, and O within the NPs. Next, CaCO₃-C12 NPs were dispersed in B72 solutions and sprayed onto limestone, which was employed as a model calcite-rich substrate. At optimal NP concentration, the resulting composite coating exhibited superhydrophobicity (CA > 150°), while it induced minimal colour alteration to limestone and effective resistance to capillary water absorption. The fluorine-free coating also demonstrated good durability against UV exposure, drop impact, salt attack, freeze–thaw cycles, tape peeling, drop pH variations, and thermal treatment.

The R(T) dependences of thin superconducting aluminum films deposited on leucosapphire and gallium arsenide substrates by electron beam sputtering and molecular beam epitaxy have been experimentally studied. Regardless of morphology, a noticeable increase in the critical temperature of the superconducting transition with a decrease in the film thickness is found. The effect is interpreted as a manifestation of the quantum size effect.

Magnetite (Fe₃O₄) nanoparticles are biocompatible, non-toxic, and easily functionalized. Coating them with mesoporous silica (mSiO₂) offers high surface area, pore volume, and tunable surface chemistry for drug loading. In this study, Fe₃O₄ magnetic nanoparticles were synthesized and coated with mSiO₂ shells enriched with calcium ions (Ca²⁺), aiming to enhance bioactivity for bone regeneration and tissue engineering. Different synthesis routes were tested to optimize shell formation Their characterization confirmed the presence of a crystalline Fe₃O₄ core with partial conversion to maghemite (Fe₂O₃) post-coating. The silica shell was mostly amorphous and the optimized samples exhibited mesoporous structure (type IVb). Calcium incorporation slightly altered the magnetic properties without significantly affecting core crystallinity or particle size (11.68–13.56 nm). VSM analysis displayed symmetric hysteresis loops and decreased saturation magnetization after coating and Ca²⁺ addition. TEM showed spherical morphology with some agglomeration. MTT assays confirmed overall non-toxicity, except for mild cytotoxicity at high concentrations in the Ca²⁺-enriched sample synthesized by a modified Stöber method. Their capacity to induce human periodontal ligament cell osteogenic differentiation, further supports the potential of Fe₃O₄/mSiO₂/Ca²⁺ core–shell nanoparticles as promising candidates for bone-related biomedical applications due to their favorable magnetic, structural, and biological properties.