Maria Emanuela Errico

Dr. Maria Emanuela Errico

National Research Council of Italy, Institute for Polymers Composites and Biomaterials (IPCB-CNR), Via Campi Flegrei 34, 80078 Pozzuoli (NA), Italy

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 June 2020 in Polymers
Verified
Journal Article
Open access
PDF file
MGMarco Guerritore
Marco Guerritore
Rachele CastaldoRachele Castaldo
Rachele Castaldo
Brigida SilvestriBrigida Silvestri
Brigida Silvestri
RARoberto Avolio
Roberto Avolio
MCMariacristina Cocca
Mariacristina Cocca
Veronica AmbrogiVeronica Ambrogi
Veronica Ambrogi
The development of new styrene-based hyper-crosslinked nanocomposites (HCLN) containing mesoporous silica nanoparticles (MSN) is reported here as a new strategy to obtain functional high surface area materials with an enhanced hydrophilic character. The HCLN composition, morphology and porous structure were analyzed using a multi-technique approach. The HCLN displayed a high surface area (above 1600 m2/g) and higher microporosity than the corresponding hyper-crosslinked neat resin. The enhanced adsorption properties of the HCLN towards polar organic dyes was demonstrated through the adsorption of a reactive dye, Remazol Brilliant Blue R (RB). In particular, the HCLN containing 5phr MSN showed the highest adsorption capacity of RB.

1 October 2019 in Polymers
Verified
Journal Article
Open access
PDF file
Rachele CastaldoRachele Castaldo
Rachele Castaldo
Francesca De FalcoFrancesca De Falco
Francesca De Falco
RARoberto Avolio
Roberto Avolio
EBEmilie Bossanne
Emilie Bossanne
FFFelipe Cicaroni Fernandes
Felipe Cicaroni Fernandes
Maurizio  AvellaMaurizio Avella
Maurizio Avella
Different classes of wastes, namely wooden wastes, plastic fractions from automotive shredded residues, and glass fiber reinforced composite wastes obtained from dismantled wind turbines blades were analyzed in view of their possible recycling. Wooden wastes included municipal bulky wastes, construction and demolition wastes, and furniture wastes. The applied characterization protocol, based on Fourier transform infrared (FTIR) spectroscopy in attenuated total reflection (ATR) mode, scanning electron microscopy coupled with energy dispersive X-ray spectroscopy (SEM/EDX), and thermogravimetric analysis (TG) coupled with FTIR spectrometry for the investigation of the evolved gases, revealed that the selected classes of wastes are very complex and heterogeneous materials, containing different impurities that can represent serious obstacles toward their reuse/recycling. Critical parameters were analyzed and discussed, and recommendations were reported for a safe and sustainable recycling of these classes of materials.

19 February 2022 in Polymers
Verified
Journal Article
Open access
PDF file
IBIrene Bonadies
Irene Bonadies
RCRoberta Capuano
Roberta Capuano
RARoberto Avolio
Roberto Avolio
Rachele CastaldoRachele Castaldo
Rachele Castaldo
MCMariacristina Cocca
Mariacristina Cocca
Maria Emanuela ErricoMaria Emanuela Errico
Maria Emanuela Errico
The sustainable management of multilayer paper/plastic waste is a technological challenge due to its composite nature. In this paper, a mechanical recycling approach for multilayer cartons (MC) is reported, illustrating the realization of thermoplastic composites based on recycled polyethylene and an amount of milled MC ranging from 20 to 90 wt%. The effect of composition of the composites on the morphology and on thermal, mechanical, and water absorption behavior was investigated and rationalized, demonstrating that above 80 wt% of MC, the fibrous nature of the filler dominates the overall properties of the materials. A maleated polyethylene was also used as a coupling agent and its effectiveness in improving mechanical parameters of composites up to 60 wt% of MC was highlighted.

1 August 2025 in Polymers
Verified
Journal Article
Open access
PDF file
RCRoberta Capuano
Roberta Capuano
RARoberto Avolio
Roberto Avolio
Rachele CastaldoRachele Castaldo
Rachele Castaldo
MCMariacristina Cocca
Mariacristina Cocca
FOFederico Olivieri
Federico Olivieri
Maria Emanuela ErricoMaria Emanuela Errico
Maria Emanuela Errico
In this study, multicomponent PLA-based biocomposites were developed. In particular, both native fibrous cellulose and cellulose with modified morphology obtained through ball milling treatments were incorporated into the polyester matrix in combination with an oligomeric plasticizer, specifically a lactic acid oligomer (OLA). The resulting materials were analyzed in terms of their morphology, thermal and mechanical properties over time, water vapor permeability, and degradation under soil burial conditions in comparison to neat PLA and unplasticized PLA/cellulose composites. The cellulose phase significantly affected the mechanical properties and enhanced their long-term stability, addressing a common limitation of PLA/plasticizer blends. Additionally, water vapor permeability increased in all composites. Finally, the ternary systems exhibited a significantly higher degradation rate in soil burial conditions compared to PLA, evidenced by larger weight loss and reduction in the molecular weight of the PLA phase. The degradation rate was notably influenced by the morphology of the cellulose phase.

24 June 2026 in Polymers
Verified
Journal Article
Open access
PDF file
FOFederico Olivieri
Federico Olivieri
SSStefano Scognamiglio
Stefano Scognamiglio
RARoberto Avolio
Roberto Avolio
Rachele CastaldoRachele Castaldo
Rachele Castaldo
MCMariacristina Cocca
Mariacristina Cocca
Maria Emanuela ErricoMaria Emanuela Errico
Maria Emanuela Errico
The increasing accumulation of glass-fiber-reinforced polymer (GFRP) waste poses significant environmental challenges, calling for effective and scalable recycling strategies. In this work, a solvent-assisted cold mixing process was employed to incorporate very high amounts of GFRP (up to 75 wt%) into recycled expanded polystyrene (ePS). The composites were deeply characterized, with particular attention to the role of particle size distribution and filler content. The results demonstrated that GFRP granulometry played a key role in determining composite performance. Intermediate particle sizes (0.25 mm) provided the best balance between dispersion, interfacial interaction, and mechanical properties, whereas excessively fine fractions introduced defects and reduced impact resistance (from 0.7 to 2.0 kJ/m2 going from dust to 0.25 mm at 75 wt%). Notably, the solvent-assisted approach has been widely recognized as an effective strategy to ensure homogeneous dispersion even at high filler contents, allowing subsequent melt processing without re-agglomeration. Recycled composites retained most of their chemical and mechanical properties after reprocessing, with only moderate performance losses mainly related to fiber fragmentation. Overall, this study demonstrates an effective and sustainable route for the simultaneous valorization of ePS and GFRP waste, enabling the production of highly loaded composites with preserved functionality and improved resource efficiency.

2 May 2026 in Microplastics
Verified
Journal Article
Open access
PDF file
ILImmacolata Liotta
Immacolata Liotta
RARoberto Avolio
Roberto Avolio
Rachele CastaldoRachele Castaldo
Rachele Castaldo
FOFederico Olivieri
Federico Olivieri
Gennaro GentileGennaro Gentile
Gennaro Gentile
MCMariacristina Cocca
Mariacristina Cocca
Plastic waste is estimated to represent 40–80% of the total amount of marine litter, with polyethylene (PE) and polypropylene (PP) being the most abundant polymeric components. The recovery and recycling of marine plastic debris are therefore essential to mitigate environmental pollution and limit the generation of secondary microplastics. In this work, a mechanical recycling strategy was investigated for the valorization of a polyethylene-rich plastic fraction (PE-rf) recovered from the marine environment, characterized by high heterogeneity and persistent inorganic contamination. Different pre-treatment routes, including cryogenic grinding and planetary ball milling, as well as blending approaches with recycled polyethylene and compatibilizing additives, were explored. The effects of composition and processing on the thermal, mechanical, and morphological properties of the resulting materials were systematically analyzed. The results show that intense mechanical homogenization and chemical compatibilization are not sufficient to overcome the intrinsic limitations imposed by contamination and compositional variability. As a proof of concept, selected formulations were processed into filaments and tested in fused filament fabrication, demonstrating basic 3D printability.