This study reviewed 98 references on the Life Cycle Assessment (LCA) of the conversion of agricultural waste into biofertilizers. Feedstocks were manure (39%), organic/food/wood waste (30%), and crop waste (26%). Biofertilizers were digestate, compost, biochar, and pellets, and full-scale application was prevalent. Approximately 64% of references cited anaerobic digestion (AD) and composting, often combined. Thermochemical and mechanical processes were less (24%) involved, mostly incineration and gasification (10% each) and pyrolysis (4%), with few cases of pelletization. Approximately 30% of references coupled LCA with an economic analysis tool. All references considered the Life Cycle Impact Assessment (LCIA) categories Global Warming Potential (GWP), Ozone Depletion Potential, Eutrophication, and Acidification. In overall AD, compared to other technologies, displayed the largest average impacts, particularly when the chosen functional unit (FU) involved manure. Composting provided lower average impacts compared to AD, and FU referring to organic/food waste largely topped manure. Thermochemical processes exhibited the smallest average impacts, compared to AD and composting, particularly when the FU was related to food/organic waste. In conclusion, further research is needed to explore technologies (particularly thermochemical and mechanical) applied at full-scale in different contexts and to the assessment of economic and social sustainability, identified as main knowledge gaps.
This study evaluated the impact of biochar on the growth of strawberry plants, combining visual and proximal sensing monitoring. The plants were rooted in soil enriched with biochar, derived from pyrolysis of soft wood at 550 °C and applied in two doses (2 and 15 g/L), and after physical activation with CO2 at 900 °C; there was also a treatment with no biochar (unaltered). Visual monitoring was based on data logging twice per week of plants’ height and number of flowers and ripe fruits. Proximal sensing monitoring involved a system including a low-cost multispectral camera and a Raspberry Pi 4. The camera acquired nadiral images hourly in three spectral bands (550, 660, and 850 nm), allowing calculation of the normalized difference vegetation index (NDVI). After three months, control plants reached a height of 12.3 ± 0.4 cm, while those treated with biochar and activated biochar grew to 18.03 ± 1.0 cm and 17.93 ± 1.2 cm, respectively. NDVI values were 0.15 ± 0.11 for control plants, increasing to 0.26 ± 0.03 (+78%) with biochar and to 0.28 ± 0.03 (+90%) with activated biochar. In conclusion, biochar application was beneficial for strawberry plants’ growth according to both visual and proximal-sensed measures. Further research is needed to optimize the integration of visual and proximal sensing monitoring, also enhancing the measured parameters.
Italy is a global top wine producer, with emphasis on high-quality wines. This study investigates the Carbon Footprint (CF), Water Footprint (WF), and Ecological Footprint (EF) of twelve red wine producers in Piedmont, Northern Italy. The analysis was based on a 0.75 L wine bottle as functional unit (FU). Twelve producers were interviewed and given questionnaires, which made it possible to gather primary data for the environmental evaluation that described vineyard and agricultural operations and wine production. The average CF was 0.88 ± 0.3 kg with 44% of CF associated with the glass bottle, 20% to the diesel fuel fed to the agricultural machines, 32% to electricity consumption, and 4% to other contributions. The average WF was 881 ± 252.4 L, with 98% Green WF due to evapotranspiration, and 2% Blue and Grey WF. The average EF was 81.3 ± 57.2 global ha, 73% ascribed to the vineyard area and 27% to CO2 assimilation. The obtained CF and WF values align with existing literature, while no comparison is possible for the EF data, which are previously unknown. To reduce the environmental impacts of wine production, actions like using recycled glass bottles, electric agricultural machines and renewable energy can help. However, high-quality wine production in Piedmont is deeply rooted in tradition and mostly managed by small producers. Further research should investigate the social acceptance of such actions, and policies supporting economic incentives could be key enablers.
This study develops an integrated circular economy assessment framework for valorizing orange peel waste (OPW), applied to a biocomposite production process for additive manufacturing and comparatively evaluated against anaerobic digestion, incineration, and animal feed pathways. The methodology combines three sequential steps: (i) a Holistic Diagnosis (HD), supported by Systemic Design and META-SWOT/C-DE analyses, to map material and energy flows, stakeholder relations, and territorial dynamics; (ii) a cradle-to-gate Life-Cycle Assessment (LCA) to quantify environmental impacts of pelletized biocomposite production; and (iii) a Multi-Criteria Decision Analysis (MCDA) integrated with circular economy indicators based on the 9R framework to compare alternative OPW valorization options. Results demonstrate that agricultural waste valorization requires a systemic and multidisciplinary approach, where technological efficiency is integrated with environmental and contextual dimensions. The analysis highlights key leverage points—such as multi-stream waste valorization and renewable energy integration—while identifying structural constraints related to seasonality, biopolymer costs, and scalability. Environmental findings confirm that substituting virgin materials with agri-food residues reduces impacts, particularly by avoiding disposal and lowering resource depletion. Sensitivity analyses further underline the importance of low-carbon electricity mixes and increased OPW incorporation to support decarbonization and long-term circular transition pathways in agro-industrial systems.