RFID technology has been widely researched and used for structural health applications because of its compact, wireless, and scalable nature. This technology is divided into chipped and chipless sensors. Chipped sensors are costly due to their chipped tags, have narrowband operations, and contribute to shortcomings in detection capability. Chipless tags provide real-time monitoring of cracks in harsh environments like high-temperature areas and high electromagnetic interference areas. This paper presents a design of a novel chipless hybrid circular-hexagon sensor that uses the frequency signature-based method for metal crack detection and characterization using wideband frequency. This sensor is small in size (16 mm × 16 mm × 1.4 mm) and easily mountable in hard-to-reach areas. It is a low-cost, passive chipless sensor that can wirelessly monitor the cracks in metallic structures. The radar cross-section of the chipless tag shows a shift in the resonant frequency of the tag under crack and no crack conditions. Key contributions of this work are that through simulations and experimental investigation, the tag is shown to be able to detect mm-scale cracks, validating the concept and correlating the presence and size of the cracks based on the shift in resonant frequencies in which a pair of Vivaldi antennas are used as a transmitter and receiver to connect to the VNA. The designed small sensor tag is tested in a benchtop setup with no prior calibration, imitating the real-time environment conditions for crack detection.
Sustainable health monitoring of infants is crucial to detect the changes in health conditions and diagnose the life threatening occurrences, at an early stage. Since infants are unable to provide feedback about discomfort or arising health complaints, it is a challenge for physicians to diagnose the medical conditions in infants effectively with less obtrusive methods. Wireless non invasive techniques are beneficial to monitor real time physiological changes in the babies and also are comfortable. In this paper, a battery-free wireless temperature sensor circuit is incorporated as a part of the pacifier, using the additive manufacturing. A temperature sensor, antenna and wireless circuit are integrated into the pacifier, to monitor the real time temperature changes of the baby over a long period of time.
1 January 2026 in IEEE Open Journal of Instrumentation and Measurement