Wang Jing

Dr. Wang Jing

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 November 2022 in IEEE Photonics Technology Letters
Verified
Journal Article
Closed access
WJWang Jing
Wang Jing
LZLeidang Zhou
Leidang Zhou
XLXing Lu
Xing Lu
LCLiang Chen
Liang Chen
ZCZimin Chen
Zimin Chen
XOXiaoping Ouyang
Xiaoping Ouyang
Gallium Oxide (Ga2O3), an emerging ultra-wide band gap semiconductor, has drawn great attention for application in radiation detection. In this letter, ultrafast X-ray detectors have been fabricated using a high resistivity unintentionally-doped (UID) $\varepsilon $ -Ga2O3 film grown on sapphire by metal-organic chemical vapor deposition (MOCVD). The detector featuring a lateral metal–semiconductor–metal (MSM) structure exhibited a low dark current < 2 nA at 100 V and its sensitivity was as high as 28.6 nC/Gy or ~ $1.0\,\,\times 10^{6}$ nC/( $\text {Gy}\cdot \text {cm}^{3}$ ) at 40 V and an X-ray dose rate of 0.383 Gy/s. A stable and repeatable transient response was observed for the detectors under switching X-ray illumination. Furthermore, the detector achieved a pulsed X-ray detection with 50 ns in full width and its time resolution was revealed to be ~7.1 ns. These results imply the great potential of the MOCVD-grown high-resistivity UID $\varepsilon $ -Ga2O3 film for ultrafast X-ray detection.

29 August 2024 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
WJWang Jing
Wang Jing
LCLiang Chen
Liang Chen
SBSong Bai
Song Bai
LZLeidang Zhou
Leidang Zhou
FWFangbao Wang
Fangbao Wang
XOXiao-ping Ouyang
Xiao-ping Ouyang
A two-terminal npn device based on 4H-SiC has been employed as a radiation detector for the first time. This device was designed as a vertical npn structure with a sensitive area of up to 1 cm2, and the thickness of the sensitive layer was about $30~\mu $ m. The detector exhibited a low dark current of $\sim ~0.12$ nA $\cdot $ cm $^{-{2}}$ with a fully depleted sensitive region at 200 V. The sensitivity of unit area of the detector achieved $36.67~\mu $ C $\cdot $ Gy $^{-{1}} \cdot $ cm $^{-{2}}$ ( $28.09~\mu $ A @ 0.766 Gy/s) to X-ray illumination (generated by bremsstrahlung with a tungsten target with tube voltage 30 kV) at 200 V, which was attributed to the amplification mechanism of the npn structure. Compared with the response characteristics of a SiC-PiN detector with the same sensitive volume, the gain of the two-terminal SiC npn detector was estimated to be 11.46 at 200 V. Specifically, the internal gain of the detector increased with the X-ray dose rate, where the X-ray photocurrent worked as the base current in the BJT devices. The internal gain also increased with the bias voltage due to the Early effect. Moreover, the two-terminal SiC npn detectors had a good switching response to X-rays and showed great potential in the applications of radiation detection.

24 December 2024 in Micromachines
Verified
Journal Article
Open access
PDF file
WJWang Jing
Wang Jing
LZLeidang Zhou
Leidang Zhou
LCLiang Chen
Liang Chen
SZSilong Zhang
Silong Zhang
FWF. Wang
F. Wang
XOXiao-ping Ouyang
Xiao-ping Ouyang
In this paper, a silicon carbide (SiC) phototransistor based on an open-base structure was fabricated and used as a radiation detector. In contrast to the exposed and thin sensitive region of traditional photo detectors, the sensitive region of the radiation detector was much thicker (30 μm), ensuring the high energy deposition of radiation particles. The response properties of the fabricated SiC npn radiation detector were characterized by high-energy X-ray illumination with a maximum X-ray photon energy of 30 keV. The SiC npn detector featured stable and clear response to the X-ray within 0.0766 Gy∙s−1 to 0.766 Gy∙s−1 below 300 V. Due to to the low leakage current of less than 1 nA and the fully depleted sensitive region, the bipolar-transistor-modeled SiC npn detector exhibited a clear common-emitter current gain of 5.85 at 200 V (under 0.383 Gy∙s−1), where the gain increased with bias voltage due to the Early effect and reached 7.55 at 300 V. In addition, the transient response of the SiC npn detector revealed a longer delay time than the SiC diode of the same size, which was associated with the larger effective capacitance of the npn structure. The npn detector with internal gain showed great potential in radiation detection.

10 February 2026 in IEEE Photonics Technology Letters
Verified
Journal Article
Closed access
LZLeidang Zhou
Leidang Zhou
ZCZhuo Chen
Zhuo Chen
LCLiang Chen
Liang Chen
SBSong Bai
Song Bai
HWHaozhe Wang
Haozhe Wang
XOXiao-ping Ouyang
Xiao-ping Ouyang
In this letter, the temperature-dependent X-ray response performance of a two-terminal 4H-SiC npn detector was investigated over the temperature range from 300 K to 500 K. The results indicated a notable reduction in the response current as the temperature increased. Specifically, the sensitivity ( $S$ ) dropped by 35.6% to 71.24%, the noise-equivalent dose rate (NED) increased by an order of magnitude, and the internal gain (Gain) decreased by 35.63% to 71.23% at various dose rates from 0.1915 Gy $\cdot $ s−1 to 1.532 Gy $\cdot $ s−1. Tests and analysis using a SiC PIN detector with a depletion region of the same thickness as that of the SiC npn detector revealed that the degradation observed in the SiC npn detector can be attributed to reduced charge collection efficiency related to mobility and lifetime of carriers within the thick depletion region. Additionally, TCAD simulations of the carrier mobility-lifetime product were conducted to illustrate the high-temperature effect on the charge collection efficiency in the $30~\mu $ m depletion region of the SiC npn detector, which is essential for the effective collection of high-energy X-ray photons. This work provided new insight into the feasibility of SiC npn detectors for high-temperature applications.

1 August 2026 in Journal of Instrumentation
Verified
Journal Article
Closed access
PDF file
YLYuting Li
Yuting Li
YZYanxia Zhang
Yanxia Zhang
TLTongding Luo
Tongding Luo
HLHaitao Li
Haitao Li
GTGeng Tian
Geng Tian
ZHZihao He
Zihao He
A high-threshold, fast-rise-time multi-channel synchronous pulse trigger source has been developed, based on analog-digital signal processing and high-speed semiconductor switching technology. Operating in external trigger mode, the system provides 15 V threshold level and an amplitude level of 15 V in critical signal chains through optimized circuit design and selective component sourcing. The study proposes and implements a hundreds-of-millisecond self-locking mechanism using a D flip-flop closed-loop circuit. This mechanism secures input signals through logical timing relationships, preventing multiple false triggers within short intervals and increasing system reliability. Furthermore, a multi-channel parallel buffer structure combined with a push-pull BJT-driven PMOS shaping circuit is designed to increase driving capability and reduce single-pulse rise time. The system ultimately delivers four synchronous pulse outputs via a distribution network, enabling multi-device synchronization. Experimental results show that the system achieves an external trigger threshold of 15 V and a self-locking duration of 201 ms. Under a 50 Ω load, it delivers pulse signals with an amplitude of 21.7 V, a pulse width of 101.09 ns, and a rise time of 1.52 ns. The peak-to-peak jitter ( T p-p ) of the triggering pulses is 0.33 ns, and the channel-to-channel temporal skew ( T p-p ) across the four output channels is 54 ps. These specifications indicate the system's capability to meet the demands for triggering in complex electromagnetic environments.