Lin Tian

Dr. Lin Tian

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 August 2021 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
LTLin Tian
Lin Tian
XWXinke Wu
Xinke Wu
CJCongrang Jiang
Congrang Jiang
Jinxu YangJinxu Yang
Jinxu Yang
In this article, the four-switch buck–boost (FSBB) converter is a preferred choice for the dc–dc applications where the step-up and step-down are needed. In order to reduce the inductor size and improve the efficiency, the zero-voltage switch (ZVS) control schemes with four segments inductor current for FSBB have been investigated in numerous publications. Among these ZVS control schemes, the optimized control variable stored as the huge look-up table data achieved minimum root-mean-square (RMS) inductor current, and the complex real-time calculation is avoided. However, for the purpose of matching the wide input and output voltage ranges, an external flash is needed for storing the look-up table data; And the large time consumption for invoking the data hazard the dynamic performance significantly. To reduce the storage device cost and meet the demand of transient, a simplified real-time control algorithm is proposed by dividing the operation into the defined Discontinuous Conduction Mode (DCM) and Continuous Conduction Mode (CCM) operation featuring the minimum RMS inductor current and ZVS operation during the whole voltage range without complex calculation and mode transient. Finally, a 300 W dc–dc prototype is built to verify the theoretical analysis and proposed control scheme with a low-cost real-time digital controller.

18 July 2023 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
FMFaheem Muhammad
Faheem Muhammad
XWXinke Wu
Xinke Wu
Jinxu YangJinxu Yang
Jinxu Yang
LTLin Tian
Lin Tian
TLTianji Liu
Tianji Liu
A resonant four-switch inverting buck-boost converter is a good choice for DC/DC applications that require an inverting voltage solution. A soft switching control scheme with four segments of resonance current has been examined using duty ratio and phase shift as control variables. As a result, the RMS value of the resonance current is low compared to DCM, which is directly proportional to the conduction loss. This control scheme allows the converter to regulate its output voltages more efficiently with soft switching operations. Thus, it contributes to an increment in efficiency improvement and board size reduction. At the same time, a simple close-loop is designed to meet the requirement of a wide voltage range with the corresponding simplified real-time PI control algorithm. For the verification of the proposed control scheme, a resonant four-switch inverting buck-boost DC/DC converter is designed and experimentally tested, which has recorded over 98.5% peak efficiency at a 1:1 inverting case (-48Vdc to 48Vdc). The converter's wide operating range is from -48Vdc to 28ni Vdc ∼ 60Vdc output voltage with a power density of 500W/in3.

13 January 2025 in Electronics
Verified
Journal Article
Open access
PDF file
Jinxu YangJinxu Yang
Jinxu Yang
LTLin Tian
Lin Tian
XWXinke Wu
Xinke Wu
In traditional inductor design with planar windings, the magnetic field distribution may not be well-organized, leading to significant winding loss, particularly at high switching frequencies. This study explores the relationship between current distribution and magnetic field distribution in the winding region. Unlike conventional magnetic flux distribution, which directs a large portion of the magnetic field vertically through the windings in the winding region, this work introduces a structure that maintains most of the magnetic flux parallel to the foil windings through the application of quasi-distributed air gaps. This paper presents a design methodology for a high-frequency foil winding inductor with high flux variation. Building on this concept, a high-power density, low loss inductor with foil windings is designed based on the four-switch buck-boost (FSBB) converter. Experimental results demonstrate that the proposed inductor design significantly reduces winding loss in inductors with planar windings.

25 June 2025 in Electronics
Verified
Journal Article
Open access
PDF file
LTLin Tian
Lin Tian
HLHui Liu
Hui Liu
YZYan Zhang
Yan Zhang
XWXinke Wu
Xinke Wu
The four-switch buck–boost (FSBB) converter, which possesses both step-up and step-down capabilities, is highly suitable for applications where input and output voltages have overlapping ranges. Correspondingly, the current shaping control (CSC) strategy is investigated for the FSBB converter, which shapes a quadrilateral inductor current waveform featuring the minimum RMS value to improve efficiency and power density. However, the small-signal model for the CSC algorithm has not yet been established, and the traditional and common modeling method requires considering multiple duty cycles and phase shifts of the FSBB converter, whose calculation is complex and inconvenient to use. For the special case of the CSC strategy using cycle-by-cycle current detection, an additional constraint of the averaged volt-second on the inductor can be regarded as zero, making the inductor current no longer a variable of the state-space, which eliminates the pole generated by the inductor and reduces the order of the small-signal model. Thus, this paper greatly simplifies the computation and design of the compensator by using the constraint condition mentioned above. This one-pole first-order model is simplified, maintains enough accuracy in the low-frequency domain, and can be corrected using only a simple PI controller. Finally, a prototype of the 300 W FSBB converter under the digital CSC algorithm was built to validate the precision and dynamic performance of the proposed first-order small-signal model.