The main direction proposed by the community of experts in the field of laser-driven ion acceleration is to improve particle beam features (maximum energy, charge, emittance, divergence, monochromaticity, shot-to-shot stability) in order to demonstrate reliable and compact approaches to be used for multidisciplinary applications, thus, in principle, reducing the overall cost of a laser-based facility compared to a conventional accelerator one and, at the same time, demonstrating innovative and more effective sample irradiation geometries. The mission of the laser-driven ion target area at ELI-Beamlines (Extreme Light Infrastructure) in Dolní Břežany, Czech Republic, called ELI Multidisciplinary Applications of laser-Ion Acceleration (ELIMAIA) , is to provide stable, fully characterized and tuneable beams of particles accelerated by Petawatt-class lasers and to offer them to the user community for multidisciplinary applications. The ELIMAIA beamline has been designed and developed at the Institute of Physics of the Academy of Science of the Czech Republic (IoP-ASCR) in Prague and at the National Laboratories of Southern Italy of the National Institute for Nuclear Physics (LNS-INFN) in Catania (Italy). An international scientific network particularly interested in future applications of laser driven ions for hadrontherapy, ELI MEDical applications (ELIMED), has been established around the implementation of the ELIMAIA experimental system. The basic technology used for ELIMAIA research and development, along with envisioned parameters of such user beamline will be described and discussed.
We report on the technological commissioning of the Laser–Plasma Ion Accelerator section of the ELIMAIA user beamline at the ELI Beamlines facility in the Czech Republic. The high-peak, high-average power L3-HAPLS laser system was used with an energy of ~10 J and pulse duration of ~30 fs on target, both in single-pulse and high repetition-rate (~0.5 Hz) mode. The laser pulse was tightly focused to reach ultrahigh intensity on target (~1021 W/cm2) and sustain such laser–plasma interaction regime during high repetition-rate operations. The laser beam, ion beam, and laser–plasma emission were monitored on a shot-to-shot basis, and online data analysis at 0.5 Hz was demonstrated through the full set of used diagnostics (e.g., far and near field, laser temporal diagnostics, X- and gamma-ray detectors, Thomson Parabola ion spectrometer, time-of-flight ion detectors, plasma imaging, etc.). The capability and reliability of the ELIMAIA Ion Accelerator was successfully demonstrated at a repetition rate of 0.5 Hz for several hundreds of consecutive laser shots.
Laser wake field acceleration (LWFA) is an efficient method to accelerate electron beams to high energy. This is a benefit in research infrastructures where a multidisciplinary environment can benefit from the different secondary sources enabled, having the opportunity to extend the range of applications that is accessible and to develop new ideas for fundamental studies. The ELI Beamline project is oriented to deliver such beams to the scientific community both for applied and fundamental research. The driver laser is a Ti:Sa diode-pumped system , running at a maximum performance of 10 Hz, 30 J, and 30 fs. The possibilities to setup experiments using different focal lengths parabolas, as well as the possibility to counter-propagate a second laser beam intrinsically synchronized, are considered in the electron acceleration program. Here, we review the laser-driven electron acceleration experimental platform under implementation at ELI Beamlines, the HELL (High-energy Electrons by Laser Light) experimental platform .
The TERESA (TEstbed for high REpetition-rate Sources of Accelerated particles) target area, recently commissioned with the L3-HAPLS laser at Extreme Light Infrastructure (ELI)-Beamlines, is presented. Its key technological sections (vacuum and control systems, laser parameters and laser beam transport up to the target) are described, along with an overview of the available plasma diagnostics and targetry, tested at relativistic laser intensities. Perspectives of the TERESA laser–plasma experimental area at ELI-Beamlines are briefly discussed.
The idea of using a gas-mixture comprising atoms with a high mass number in order to increase proton energies in laser induced plasma acceleration at critical density is investigated by means of 2D PIC (Particle-In-Cell) simulations. Comparing and discussing the case of a pure hydrogen plasma and that of a plasma containing higher mass number species with a small percentage of hydrogen, we demonstrate that the mixture enhances the energies of the accelerated protons. We also show that using a gas-mixture introduces the possibility of using the densities ratio in order to change the relative acceleration of the species.
10 December 2012 in Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment