Chloride ions are the primary aggressive agents responsible for the corrosion of reinforced concrete structures and, consequently, the reduction of their service life, which entails high repair costs. These ions penetrate the concrete through its porous network and depassivate the steel reinforcement, even in small quantities. The adoption of specific binders modifies the cementitious matrix, potentially hindering the progression of these ions. As a chloride detection technique, X-ray fluorescence (XRF) can be employed, which, in addition to identifying the elements present in a sample, allows the creation of intensity distribution maps. Thus, this study aimed to evaluate how the XRF technique can contribute to understanding chloride penetration and to identify which cement types most effectively hinder their advancement. To accelerate chloride ion migration, two methods were employed: ASTM C1202 and NT Build 492. Eight different types of cement were analyzed, and the results indicated high resistance to chloride penetration in cements containing slag and pozzolan, while cements with filler exhibited lower resistance.
1 January 2025 in REM - International Engineering Journal
The extraction of sand from riverbeds through dredging is a common practice in construction and has given rise to significant environmental repercussions. Sand removal contributes to heightened turbidity and alterations in watercourses, reshaping the original channels due to equipment utilization, and disrupting their flow. In response to these challenges, crushed stone dust emerges as a sustainable alternative material for partially or entirely replacing natural sand in concrete production. This study aimed to evaluate the mechanical properties and workability of concrete with a characteristic compressive strength of 25 MPa, employing total replacement (100% crushed stone dust) and partial replacement (50% crushed stone dust and 50% sand). The materials utilized encompassed crushed stone, natural sand, Portland cement CP II F - 32, crushed stone dust, and a superplasticizer additive. The results indicated no significant difference in compressive strength (P < 0.05), with values of 36.85 MPa and 30.31 MPa for total and partial replacement, respectively, comparable to the reference concrete (33.47 MPa). In terms of tensile strength by split tensile testing, concrete with total and partial replacement achieved 3.09 MPa and 3.23 MPa, respectively, while the reference mix recorded 3.31 MPa. Total replacement posed challenges to the workability of fresh concrete, necessitating a higher dosage of superplasticizer. In conclusion, crushed stone dust demonstrates its capacity to substitute natural sand, either entirely or partially, while upholding mechanical properties comparable to traditional concrete. However, careful consideration of the impact on concrete workability is essential when opting for total replacement of the fine aggregate.