An overview of the most recent developments and improvements to the low-loss TriPleX Si 3 N 4 waveguide technology is presented in this paper. The TriPleX platform provides a suite of waveguide geometries (box, double stripe, symmetric single stripe, and asymmetric double stripe) that can be combined to design complex functional circuits, but more important are manufactured in a single monolithic process flow to create a compact photonic integrated circuit. All functionalities of the integrated circuit are constructed using standard basic building blocks, namely straight and bent waveguides, splitters/combiners and couplers, spot size converters, and phase tuning elements. The basic functionalities that have been realized are: ring resonators and Mach-Zehnder interferometer filters, tunable delay elements, and waveguide switches. Combination of these basic functionalities evolves into more complex functions such as higher order filters, beamforming networks, and fully programmable architectures. Introduction of the active InP chip platform in a combination with the TriPleX will introduce light generation, modulation, and detection to the low-loss platform. This hybrid integration strategy enables fabrication of tunable lasers, fully integrated filters, and optical beamforming networks.
Hybrid integrated semiconductor laser sources offering extremely narrow spectral linewidth, as well as compatibility for embedding into integrated photonic circuits, are of high importance for a wide range of applications. We present an overview on our recently developed hybrid-integrated diode lasers with feedback from low-loss silicon nitride (Si N in SiO ) circuits, to provide sub-100-Hz-level intrinsic linewidths, up to 120 nm spectral coverage around a 1.55 m wavelength, and an output power above 100 mW. We show dual-wavelength operation, dual-gain operation, laser frequency comb generation, and present work towards realizing a visible-light hybrid integrated diode laser.
We demonstrate a broadband and continuously tunable 1×4 optical beamforming network (OBFN), based on the hybrid integration of indium phosphide (InP) components in the silicon nitride (Si 3 N 4 ) platform. The photonic integrated circuit (PIC) comprises a hybrid InP-Si 3 N 4 external cavity laser, a pair of InP phase modulators, a Si 3 N 4 optical single-sideband full carrier (SSBFC) filter followed by four tunable optical true time delay lines (OTTDLs), and four InP photodetectors. Each OTTDL consists of eight cascaded thermo-optical micro-ring resonators (MRRs) that impose tunable true time delay on the propagating optical signals. The OBFN-PIC is designed to facilitate the steering of a microwave signal with carrier frequency up to 40 GHz over a continuous set of beam angles. We evaluate the performance of the OBFN-PIC to handle and process microwave signals, measuring the link gain, the noise figure (NF), and the spurious-free dynamic range (SFDR) parameters. Moreover, we assess its beamforming capabilities assuming that the OBFN-PIC is part of a wireless system operating in the downlink direction and feeds a multi-element antenna array. Using microwave signals at 5 and 10 GHz with quadrature amplitude modulation (QAM) formats at 500 Mbaud, we evaluate the performance of the OBFN-PIC under various configurations. We show that error-free performance can be achieved at both operating frequencies and for all the investigated beam angles ranging from 45° to 135°, thus validating its potential for high-quality beamforming performance.
Photonics-based techniques spearhead the generation of high-frequency signals in the millimeter-and Terahertz wave, crucial for ultrabroadband mobile wireless link development. Photonic integration is enabling to provide the photonic approach with added advantages of energy-efficiency, flexibility and scalability, in addition to signal quality. We present an optical heterodyne system based on a novel dual laser module containing two InP-Si 3 N 4 hybrid lasers with intracavity wavelength selective optical filters with output optical power per laser of up to 15 dBm (31 mW), wide wavelength tuning of about 60 nm, and narrow optical linewidth below 100 kHz. To the best of our knowledge, we present for the first time the continuous-wave generation of RF frequencies over a wide tuning range from C-band (4 GHz – 8-GHz) to W-band (75 GHz – 110 GHz) achieving record low RF electrical linewidth around 108 kHz and long-term drift < 12 MHz with two free-running lasers. This is the best beat-note linewidth obtained with such an integrated source in a free-runnning regime and with a wide tuning range ever reported.
We present a novel photonic beamformer for a fully integrated transmit phased array antenna, together with an automatic procedure for tuning the delays in this system. Such an automatic tuning procedure is required because the large number of actuators makes manual tuning practically impossible. The antenna system is designed for the purpose of broadband aircraft-satellite communication in the Ku-band to provide satellite Internet connections on board the aircraft. The goal of the beamformer is to automatically steer the transmit antenna electronically in the direction of the satellite. This is done using a mix of phase shifters and tunable optical delay lines, which are all integrated on a chip and laid out in a tree structure. The Ku-band has a bandwidth of 0.5 GHz. We show how an optical delay line is automatically configured over this bandwidth, providing a delay of approximately 0.4 ns. The tuning algorithm calculates the best actuator voltages based on past measurements. This is the first time that such an automatic tuning scheme is used on a photonic beamformer for this type of transmit phased array antenna. We show that the proposed method is able to provide accurate beamforming (< 11.25° phase error over the whole bandwidth) for two different delay settings.
We for the first time, the optical injection locking (OIL) to a frequency comb of a hybrid $\text{{InP-Si}}_{3}\text{{N}}_{4}$ dual laser source for high-purity mm-wave generation through optical heterodyning. Key performance parameters of the comb line demultiplexing functionality provided by this source under OIL – such as adjacent-comb-line side mode suppression ratio (SMSR) and locking range – are reported. It is also shown that the amount of free-running drift exhibited by the hybrid lasers (which should be as little as possible to keep them within the locking range) can be minimized by reducing the amount of bias level applied to the heater-based phase actuators present in such lasers. According to the measured drift, locking range and SMSR, these lasers have potential to achieve continuous locking with SMSR levels of more than 45 dB at comb line separations higher than 9 GHz. Successful carrier generation at 93 GHz is demonstrated by locking the two lasers to an optical frequency comb achieving an ultra-stable International Telecommunication Union (ITU)-compliant signal. Both real-time and DSP-aided data transmissions are demonstrated at this frequency achieving data rates of 12.5 and 28 Gbit/s, respectively.