Large-diameter buried steel pipes (BSPs) have been widely utilized in water diversion and hydropower fields. This paper presents a comprehensive numerical investigation on the interaction between the large-diameter pipe and soil under three typical working conditions, to capture the structural mechanical behaviors of pipe deformation, soil displacement, and soil pressure. Furthermore, a parametric analysis of pipe diameter is conducted, along with the sensitivity study of soil parameters based on the orthogonal test method. The results show that the water weight increases the pipe deformation significantly by 14%, while the high internal water pressure decreases the deformation greatly with the maximum effect of 39%. The pattern of soil pressure at the top of the pipe changes from parabola to double-hump as the pipe diameter varies from 0.5 m to 5.0 m. The pipe deformation and soil pressure keep increasing with the pipe diameter, but the safety margin for prism load decreases gradually. Pipe deformation and soil pressure are very sensitive to the elastic modulus and Poisson’s ratio of backfill. Friction coefficients of soil-soil (trench sidewall) and pipe-soil have great influences on the soil pressure, while the bedding material and backfill cohesion have small effects on it.
Buried flexible pipes are essential for infrastructure, yet current soil pressure models often overlook internal pressure. This study employs theoretical analysis and finite element methods to examine the soil pressure under internal pressure. An innovative soil pressure model is proposed, and the corresponding calculation formulas are derived. The results show that soil pressure generally exhibits a parabolic distribution under internal pressure, which is less affected by pipe diameter and diameter-to-thickness ratio but significantly influenced by burial depth. Moreover, the peak soil pressure is higher than that predicted by the prism or Marston models. A parabola model for soil pressure is proposed, characterizing the distribution in a parabolic form, with the peak pressure calculated as 1.2 times the prism load. For good accuracy and adaptability of large-diameter pipes, parabola and basin models are used together according to the relative size of pipe diameter and burial depth. Compared to uniform soil pressure, the parabola model reduces the deformation coefficient by approximately 26%, while the basin model reduces it by about 7%. Furthermore, a comprehensive comparison of pipe deformation from various methods shows that the proposed model aligns more closely with the finite element results in both trend and magnitude.
High-performance fiber-reinforced concrete (HPFRC) offers exceptional strength, ductility, and durability, making it highly promising for electric power pipe jacking applications. However, limited research exists on the mechanical properties of HPFRC pipes, especially regarding reinforcement schemes. This study bridges this gap by using a combination of three-point testing, analytical calculations, and numerical simulations to investigate the mechanical behavior and performance of HPFRC pipes under various reinforcement configurations. The results show that the load–displacement curve of HPFRC pipes initially follows a linear elastic relationship, but as the load exceeds 200 kN/m, displacement increases and cracks form, with failure occurring at 410 kN/m. HPFRC pipes demonstrate significantly enhanced load-bearing and crack resistance capabilities, with reduced reinforcement and wall thickness compared to traditional materials, maintaining high load-bearing capacity even after damage. The three analysis methods generally align in terms of load-bearing and failure processes, though the analytical method reveals limitations in accurately predicting crack widths. The study also reveals that reinforcement schemes significantly affect the pipes’ structural performance, with double layer and inner layer reinforcement providing superior damage resistance. This study contributes new insights into HPFRC pipe performance and provides a basis for optimizing reinforcement designs in pipe jacking projects.
Buried parallel pipelines are increasingly common, and unlike single-line systems, adjacent pipelines exhibit mutual interactions. This study investigated their behavior under symmetric and asymmetric conditions, considering empty pipeline, water filling, and normal working, as well as the effects of diameter-to-thickness ratio, spacing, and burial depth. The results indicate that the pipeline–soil interaction differs significantly from single pipelines and is highly dependent on working conditions. Under symmetric conditions, vertical and horizontal deformations differ by 3.0–4.3 mm; contact pressure is nearly circular under empty pipeline and water filling conditions, but elliptical under normal working condition; tangential force follows a cloverleaf pattern; and soil pressure at the pipeline top and vertical soil support lose axial symmetry, with unequal horizontal resistance on either side. Under asymmetric operations, the largest differences occur under the water filling—normal working condition, with the soil pressure at the top of the #1 pipeline being 36.7% lower than that of the #2 pipeline. Moreover, smaller diameter-to-thickness ratios reduce sensitivity to working conditions, while greater burial depth linearly increases deformation and soil pressure, amplifying inter-pipeline differences. Pipeline spacing has only limited effects. These findings reveal the mechanical properties of parallel pipelines under various operating scenarios, providing a reference for the design of multi-pipeline systems.
27 July 2025 in International Journal of Steel Structures
Large-diameter buried steel pipes (BSPs) play critical roles in water transport for major water diversion and hydropower projects. Due to poor pipe-soil composite system properties and installation conditions, they are prone to excessive deformation, resulting in safety hazards. This paper takes a BSP project subjected to excessive deformation as an example. A simplified numerical model is first established to analyze the structural performance, including the stress and plasticity, and the relationship between the stress and deformation of the pipe. Furthermore, a jacking method to rehabilitate the pipe-soil composite system is conducted to explore its influences on pipe deformation, stress, and plasticity. The results show that considerable bending stresses occur in the pipe and that sections of the midspan and stiffening ring are in the pure bending state and eccentric bending state, respectively. Areas of high stress and plasticity center at the crown, springline, and invert of the pipe, and steel pipes with ring deformation of 8.9% can be continued to be used, as the full yielding of the pipe walls occurs at the ring deformation of 15.8%. The jacking method is an effective solution for the rehabilitation of BSPs subjected to large deformation and can reduce pipe deformation significantly while increasing the stress at the pipe crown and the pipe plasticity only slightly.