Pure titanium (Ti) and its alloys are the gold standard for dental implants because a stable titanium dioxide passive film provides excellent corrosion resistance in physiological environments. In this study, we aimed to examine electrochemical interactions between Ti and cobalt–chromium–molybdenum alloy (CoCrMo), and between a novel Ti–magnesium composite (BIACOM TiMg) and CoCrMo, when immersed in everyday solutions representing beverage or oral hygiene exposure. Test solutions included Coca-Cola®, lemon juice, Elmex® fluoride gel, Listerine® Cool Mint, and Sensodyne® fluoride paste. Immersion experiments paired Ti sticks with CoCrMo sticks and, separately, BIACOM TiMg with CoCrMo sticks, with three measurements per configuration. When galvanically coupled with CoCrMo, immersion in Coca-Cola produced galvanic potential differences of ~983 mV for the BIACOM TiMg-CoCrMo couple and 830 mV for the commercially pure grade 4 (CP4) Ti-CoCrMo couple, indicating significant electrochemical instability. Both materials showed significant potential increases in Elmex fluoride gel. Listerine Cool Mint and Sensodyne fluoride exposure produced electrochemical interactions exceeding 200 mV. Significant differences in corrosion stability were observed between CP4 Ti and BIACOM TiMg. These findings indicate that material pairing and electrolyte environment significantly influence galvanic behavior, with the Ti-Mg composite showing greater susceptibility than CP4 Ti, informing dental/biomedical material selection in oral environments.
This study aimed to evaluate the influence of different fluoride-containing toothpastes on fluoride uptake, surface roughness, and microhardness of six ion-releasing restorative dental materials, including glass hybrids (EQUIA Forte HT with and without coating), glass ionomer cements (Fuji IX), resin-modified GICs (Fuji II LC), alkasites (Cention Forte), and ion-releasing composites (Luminos UN and Activa). Specimens were prepared and subjected to a four-day brushing protocol using six toothpastes with varying fluoride formulations (NaF, SnF2, SMFP) and concentrations. Fluoride uptake was assessed by measuring fluoride release using an ion-selective electrode, while surface roughness and microhardness were assessed before and after brushing. Results revealed significant variations in fluoride uptake, with Fuji IX and EQUIA Forte HT showing the highest release, particularly when brushed with NaF-based toothpastes (Duraphat 5000 and 2800). Surface roughness increased post-brushing, with the greatest changes observed in Activa, while microhardness decreased across most materials, except for coated EQUIA Forte HT, which exhibited improved compactness. Resin-based composites, such as Luminos UN and Activa, demonstrated lower fluoride uptake and minimal changes in microhardness compared to GICs. The findings underscore the importance of material composition and toothpaste formulation in influencing fluoride dynamics, surface properties, and mechanical performance of restorative materials.
This study evaluated how the addition of 5 wt% bioactive glass and 15 wt% short glass fibers to EQUIA Forte HT affects the microhardness, micromorphology, and elemental composition of demineralized dentin. Class I cavities in 28 human third molars were demineralized with 37% phosphoric acid and restored with: (1) Filtek Universal composite, (2) EQUIA Forte HT, (3) EQUIA Forte HT + 5wt% BAG, or (4) EQUIA Forte HT + 15wt% short glass fibers. After 4 weeks of storage in phosphate-buffered saline at 37 °C, the teeth were cut in half, obtaining two samples from each tooth (n = 14). Vickers microhardness (HV0.1) was measured on demineralized dentin 50–100 μm apical to the restoration interface. Representative specimens (n = 2) were examined using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS). Data were analyzed with one-way ANOVA (α = 0.05). Unmodified EQUIA Forte HT showed the highest mean dentin microhardness recovery (25.06 ± 1.42 HV0.1), followed by composite (17.31 ± 0.66 HV0.1), BAG-modified (23.74 ± 1.37 HV0.1) and fiber-reinforced (22.15 ± 1.06 HV0.1) groups (p < 0.001, all pairwise comparisons p ≤ 0.039). Glass hybrids showed prominent Ca/P peaks; modified groups had elevated Si (BAG) and Al (fibers). SEM revealed smoother surfaces with fewer cracks in modified materials. Unmodified EQUIA Forte HT produced the highest short-term microhardness recovery, while BAG and fiber additions altered surface morphology and elemental composition but slightly reduced early hardness.
Pure titanium (Ti) and its alloys are the "gold standard" for dental implants due to their stable titanium dioxide passive film providing excellent corrosion resistance in physiological environments. This study examined electrochemical interactions between Ti and cobalt-chromium-molybdenum alloy (CoCrMo), and between a novel Ti-Magnesium composite (BIACOM TiMg) and CoCrMo, when immersed in everyday solutions representing beverage or oral hygiene exposure. Test solutions included Coca-Cola®, lemon juice, Elmex® fluoride gel, Listerine® Cool Mint, and Sensodyne® fluoride paste. The immersion experiment paired Ti sticks with CoCrMo sticks, then BIACOM TiMg composite with CoCrMo sticks, with three measurements per configuration. Coca-Cola immersion increased electrochemical potential to ~983 mV for BIACOM TiMg and ~830 mV for CP4 titanium. Significant potential increases occurred in Elmex fluoride gel for both materials. Listerine Cool Mint and Sensodyne Fluoride exposures showed electrochemical interactions exceeding 200 mV. Marked differences in corrosion stability between CP4 titanium and BIACOM TiMg composite were confirmed. Findings indicate that material pairing and electrolyte environment significantly influence galvanic and corrosion behavior, with Ti-Mg composite showing higher susceptibility than CP4 titanium under tested conditions, impacting dental/biomedical material selection in oral environments.