The main component of the hydrogen production system is the electrolyzer (EL), which is used to convert electrical energy and water into hydrogen and oxygen. The power converter supplies the EL, and the controller is used to ensure the global stability and safety of the overall system. This review aims to investigate and analyze each one of these components: Proton Exchange Membrane Electrolyzer (PEM EL) electrical modeling, DC/DC power converters, and control approaches. To achieve this desired result, a review of the literature survey and an investigation of the PEM EL electrical modeling of the empirical and semi-empirical, including the static and dynamic models, are carried out. In addition, other sub-models used to predict the temperature, gas flow rates (H₂ and O₂), hydrogen pressure, and energy efficiency for PEM EL are covered. DC/DC power converters suitable for PEM EL are discussed in terms of efficiency, current ripple, voltage ratio, and their ability to operate in the case of power switch failure. This review involves analysis and investigation of PEM EL control strategies and approaches previously used to achieve control objectives, robustness, and reliability in studying the DC/DC converter-PEM electrolyzer system. The paper also highlights the online parameter identification of the PEM electrolyzer model and adaptive control issues. Finally, a discussion of the results is developed to emphasize the strengths, weaknesses, and imperfections of the literature on this subject as well as proposing ideas and challenges for future work.

This paper compares the performance of different control techniques applied to a high-performance brushless DC (BLDC) motor. The first controller is a classical proportional integral (PI) controller. In contrast, the second one is based on adaptive neuro-fuzzy inference systems (proportional integral-adaptive neuro-fuzzy inference system (PI-ANFIS) and particle swarm optimization-proportional integral-adaptive neuro-fuzzy inference system (PSO-PI-ANFIS)). The control objective is to regulate the rotor speed to its desired reference value in the presence of load torque disturbance and parameter variations. The proposed controller uses a dSPACE platform (MicroLabBox controller board). The experimental prototype comprises a PEMFC system (the Nexa Ballard FC power generator: 1.2 kW, 52 A) and a brushless DC motor BLDC of 1 kW 1000 rpm. The PSO-PI-ANFIS controller presents better performance than the PI-ANFIS and classical PI controllers due to its ability to optimize the PI-ANFIS controller’s parameters using the particle swarm optimization (PSO) algorithm. This optimization results in improved tracking accuracy and reduced overshoot and settling time.

Integrating electric vehicles (EVs) into the transportation ecosystem is crucial for environmental protection. With the increasing demand for sustainable mobility solutions, wireless power transfer (WPT) systems present a promising method to facilitate the adoption of EVs while reducing carbon footprints. This paper presents a control strategy for the primary side of a WPT charger utilizing a genetic algorithm (GA) combined with a feedforward artificial neural network (ANN). The aim is to optimize charging in constant current (CC) mode and enhance energy transmission efficiency. The proposed approach employs a GA to control the WPT charger, enabling real-time adaptation of charging parameters. The ANN estimates the system’s efficiency, ensuring optimal performance during the charging process. The developed control strategy significantly improved energy transfer efficiency and system stability. Simulation results demonstrate the effectiveness of this new approach, achieving an efficiency of 89.32% in challenging situations of loss of communication with the vehicle. To validate the design procedure, an experimental prototype was constructed, operating at an operational frequency of 85 kHz. Experimental results confirm the proposed design methodology.