Novel photoluminescent carbon dots (CDs) were synthesized through a facile hydrothermal method using Hibiscus tea extract as a natural carbon source and boric acid as a boron source. The optical and physicochemical properties of the as-synthesized nitrogen- and boron-doped CDs (NB-CDs) were characterized using UV–Visible (UV–Vis), photoluminescence (PL) spectroscopy, Fourier-transform infrared (FTIR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM). The as-synthesized NB-CDs showed spherical morphology of approximately 6.2 ± 0.5 nm with quantum yield (9.2%), high aqueous solubility, strong photo-stability, and excitation-dependent PL behavior. The obtained NB-CDs exhibited high stability over a wide pH range and high ionic strength. Additionally, NB-CDs exhibited PL enhancement response with excellent sensitivity toward multi-metal ions, including Ag⁺, Cd²⁺, and Cr³⁺ ions, with very low detection limits of 44.5, 164.4, and 54.6 nM, respectively, with a wide concentration range of 0–10 μM. Upon testing the cytotoxicity of the NB-CDs at a concentration of 20 μg/mL for 24 h, we found no obvious inhibition of cell viability. Therefore, the proposed sensor method can be successfully applied to detect Ag⁺, Cd²⁺, and Cr³⁺ ions in cell imaging as well as in real water environmental samples.

In this study, nanocomposites of AgNPs encapsulated in carboxymethyl chitosan (CMCS) with sulfobetaine methacrylate (SB) hydrogel (AgNPs/CMCS-SB) were synthesized. The UV-Vis spectra indicated the presence of AgNPs, with a broad peak at around 424 nm, while the AgNPs-loaded CMCS-SB nanocomposite exhibited absorption peaks at 445 nm. The size and dispersion of AgNPs varied with the concentration of the AgNO₃ solution, affecting swelling rates: 148.37 ± 15.63%, 172.26 ± 18.14%, and 159.17 ± 16.59% for 1.0 mM, 3.0 mM, and 5.0 mM AgNPs/CMCS-SB, respectively. Additionally, water absorption capacity increased with AgNPs content, peaking at 11.04 ± 0.54% for the 3.0 mM AgNPs/CMCS-SB nanocomposite. Silver release from the nanocomposite was influenced by AgNO₃ concentration, showing rapid initial release followed by a slower rate over time for the 3.0 mM AgNPs/CMCS-SB. XRD patterns affirmed the presence of AgNPs, showcasing characteristic peaks indicative of a face-centered cubic (fcc) structure. The FTIR spectra highlighted interactions between AgNPs and CMCS-SB, with noticeable shifts in characteristic bands. In addition, SEM and TEM images validated spherical AgNPs within the CMCS-SB hydrogel network, averaging approximately 70 and 30 nm in diameter, respectively. The nanocomposite exhibited significant antibacterial activity against S. aureus and E. coli, with inhibition rates of 98.9 ± 0.21% and 99.2 ± 0.14%, respectively, for the 3.0 mM AgNPs/CMCS-SB nanocomposite. Moreover, cytotoxicity assays showcased the efficacy of AgNPs/CMCS-SB against human colorectal cancer cells (HCT-116 cells), with the strongest cytotoxicity (61.7 ± 4.3%) at 100 μg/mL. These results suggest the synthesized AgNPs/CMCS-SB nanocomposites possess promising attributes for various biomedical applications, including antimicrobial and anticancer activities, positioning them as compelling candidates for further advancement in biomedicine.

In this work, a promising material of polyaniline (PANI) and two-dimensional molybdenum diselenides consisting of a PANI@2D-MoSe₂ binary composite was prepared by an electrochemical polymerization ethod. The as-prepared PANI@2D-MoSe₂, the polymer covered in the sheet-like structure of 2D-MoSe₂ surface morphologies, was observed through FE-SEM and HR-TEM studies. The SAED pattern of PANI@2D-MoSe₂ was observed to be in an octahedral phase. The octahedral crystalline phase was also confirmed based on the XRD pattern. In addition, EIS studies of the PANI@2D-MoSe₂ binary composite counter electrode (CE) revealed the highest electrical conductivity of 3.47 × 10⁻⁴ S/cm at room temperature. The DSSCs assembled the PANI@2D-MoSe₂ CE, which amounted to a 7.38% efficiency. Pristine PANI, 2D-MoSe₂, and Pt CEs exhibited efficiencies of 5.07%, 5.82%, and 6.61%. The PANI integrated with 2D (MoSe) combines influences of conductivity and stability for future energy conversion technologies.

Background/Objectives: Nitazoxanide (NTX) exhibits promising therapeutic potential; its effectiveness is constrained by its low oral bioavailability due to its poor water solubility and limited permeability. Methods: This study focused on developing a complex of NTX with β-cyclodextrins (β-CDs), specifically β-CD and hydroxypropyl-β-cyclodextrin (Hβ-CD), to enhance the solubility and antiviral activity of NTX. Results: The formation of the β-CD:NTX in an aqueous solution was verified using UV–visible spectroscopy, confirming a 1:1 inclusion complex. Characterization of the solid β-CD:NTX complexes was confirmed via FTIR, X-ray diffraction (XRD), scanning electron microscopy (SEM), and DSC-TGA analyses. Molecular docking studies revealed that the NTX thiazole ring with the nitro group was positioned within the β-CDs cavity, while the benzene ring remained outside. Phase solubility tests showed that β-CD:NTX complexes were formed with high stability constants, demonstrating a linear increase in NTX solubility as the β-CD concentration increased. Dissolution tests revealed rapid and nearly complete NTX release within 90 min for β-CD:NTX and Hβ-CD:NTX complexes. The β-CD:NTX complexes were tested for their antiviral activity against Herpes simplex virus (HSV-1) cultures. Results showed that the Hβ-CD:NTX complex had significantly higher antiviral efficacy than β-CD:NTX and free NTX alone. Moreover, cytotoxicity and cellular uptake studies on Vero cells indicated that the Hβ-CD:NTX complex demonstrated lower cytotoxicity and had the highest IC₅₀ value, followed by β-CD:NTX and free NTX. Conclusions: These findings suggest that Hβ-CD:NTX inclusion complexes may serve as effective carriers for delivering NTX in HSV-1 treatments using Vero cell models.

Fluorinated organic molecules have become indispensable in modern chemistry, owing to the unique properties imparted by fluorine to other compounds, including enhanced metabolic stability, controlled lipophilicity, and improved bioavailability. The site-selective incorporation of fluorine atoms into organic frameworks is essential in pharmaceutical, agrochemical, and material science research. In recent years, catalytic fluorination has become an important methodology for the efficient and selective incorporation of fluorine atoms into complex molecular architectures. This review highlights advances in catalytic fluorination reactions over the past six years and describes the contributions of transition metal catalysts, photocatalysts, organocatalysts, and electrochemical systems that have enabled site-selective fluorination under a variety of conditions. Particular attention is given to the use of well-defined fluorinating agents, including Selectfluor, N-fluorobenzenesulfonimide (NFSI), AlkylFluor, Synfluor, and hypervalent iodine reagents. These reagents have been combined with diverse catalytic systems, such as AgNO₃, Rh(II), Mo-based complexes, Co(II)-salen, and various organocatalysts, including β,β-diaryl serine catalysts, isothiourea catalysts, and chiral phase-transfer catalysts. This review summarizes proposed mechanisms reported in the original studies and discusses examples of electrophilic, nucleophilic, radical, photoredox, and electrochemical fluorination pathways. Recent developments in stereoselective and more sustainable protocols are also examined. By consolidating these strategies, this article provides an up-to-date perspective on catalytic fluorination and its impact on synthetic organic chemistry.