Air filters are crucial components of building ventilation systems. Compared to conventional air filter media like glass fibers and melt-blown fibers, electrospinning membranes are more efficient for capturing various pollutants due to the smaller pores present on the structure. In this paper, activated carbon filters were prepared with eco-friendly polylactic acid (PLA) and microcrystalline cellulose (MCC) using electrospinning to obtain a high-quality factor (QF) fibrous mat for aerosol particle matter (PM) filtration and volatile organic compounds (VOCs) adsorption. Several configurations of the final membranes were investigated and tested for fiber morphology and air filtration performance. Filtering efficiency and adsorption properties were evaluated in a real-scale room by measuring the particle penetration of the newly synthesized and commercial filters against neutralized aerosol particles (3% NaCl aqueous solution) and VOCs (methyl ethyl ketone). The calculated depolluting efficiencies were up to 98% in terms of PM and 55% for VOCs abatement, respectively. Our results indicate that the proposed hybrid membranes represent promising materials for highly efficient and sustainable air filters for home application systems.
The problem of water pollution by various xenobiotics has gained a lot of interest due to their persistence, bioaccumulation potential, and toxic effects on ecosystems and humans. Electrochemical sensors offer a rapid, sensitive, and cost-effective method for on-site monitoring. In this research, an electrochemical sensor for xenobiotics based on a biochar–alumina composite is developed. The biochar–alumina composites were obtained by the air-limited pyrolysis of oak sawdust in the presence of alumina. Two types of alumina were mixed with oak sawdust in three ratios and subjected to thermal treatment. The resulting composites were characterized by SEM, N2 adsorption isotherm, XRD, and electrochemical characterization. The detection of the herbicide pendimethalin and the antibiotic ciprofloxacin was investigated, and the composite with the optimal biochar/alumina ratio was selected for each of the xenobiotics studied. A linear current response was obtained for pendimethalin in the concentration range 0.7 μM to 70.0 μM with an LOD of 0.5 μM. A linear current response was obtained for ciprofloxacin in the concentration range 1.6 μM to 55.4 μM with an LOD of 0.63 μM. A comparison of the characterization results with the electroanalytical performance implied the importance of the hydrophobic/hydrophilic nature of the electrode surface for detecting the analyte under investigation.
Mixed cotton–polyester textile waste remains difficult to recycle because processes that recover synthetic polymers often leave the cotton fraction underused, while cellulose extraction methods may compromise the polyester component. This study investigates whether cotton in such blends can be converted into high-quality microcrystalline cellulose while retaining the potential value of the recovered polyester fraction. Cotton waste and cotton–polyester blends were treated using aqueous sulfuric acid at different conditions: from 15 to 20% acid concentration and from 70 to 80 °C for five to ten hours. The recovered microcrystalline cellulose was characterised and compared to commercial microcrystalline cellulose, while the polyester fraction was assessed using tensile testing. Enzymatic hydrolysis and a dimethyl sulfoxide co-solvent approach were evaluated as alternatives. The aqueous acid process yielded 82 to 97% microcrystalline cellulose from cotton waste and up to 51% from blended waste. The recovered cellulose showed around 10% higher crystallinity than commercial material and a similar particle size distribution, although morphology depended on the feedstock. The polyester fraction showed only minor reductions in tensile performance. The novelty of this study lies in the demonstration of a simple, ionic-liquid-free, single-reagent route that valorises both material streams from cotton–polyester textile waste.