The aim of this study was to analyze the impact of the categories of bus downtime caused by the necessity of their repair on the availability indicator. A retrospective study covering 12 years of bus operation was carried using the selected municipal transport company as an example. The share of the selected categories of downtime in the total time of vehicle downtime was analyzed. The Spearman’s rank correlation coefficient was used for the analysis. The research covered seven makes and types of buses and six categories of downtime. A ranking of the downtime categories was developed according to the criterion of the statistical dispersion of stoppage time as a measure of their unpredictability. It was shown that categorized unavailability was strongly dependent on the rank of downtime and loosely dependent on the age of buses. In practical applications, the test results may be useful in improving the fleet maintenance processes, selecting the make of new buses or development of models for safety margin availability.

Contemporary research on electric buses focuses mainly on the following issues: energy efficiency, range and transport costs, and traction battery technology. However, little research has been conducted on operational reliability. This article presents a comparative assessment of the reliability of electric buses in relation to combustion engine buses. The research was conducted under real conditions in the city of Lublin, Poland. The reliability functions of buses and their structural components were determined based on the Weibull distribution. It was shown that electric buses have a shorter distance between failures than combustion engine buses of analogous capacity. The statistical significance of the differences in reliability between electric and combustion engine buses was verified. The suitability of the Weibull model as a model of bus reliability in comparative studies was verified. The results of the research can be used to monitor current sustainable public transport development programs and to improve bus diagnostic and maintenance systems in transport companies.

When a trolleybus travels through insulated sections of the overhead contact line, it experiences momentary power interruptions, which adversely affect the vehicle’s on-board auxiliary subassemblies. To reduce these negative effects, one can harness energy recovered via regenerative braking. A model power supply circuit diagram for structural systems of the trolleybus is proposed. Simulation tests were carried out to develop a method for analyzing power supply to trolleybus auxiliary devices and verify it in a real-life example. The results allow determination of the limit power that can be generated by the trolleybus drive system to feed auxiliary devices during interruptions in power supply from the overhead contact line. The possibility of powering the on-board auxiliary equipment of a trolleybus using energy from recuperation with a traction motor is presented.

This study deals with the assessment of the progress of the electromobility programme with regard to the technical availability of public transport buses. The aim of this study was to conduct a comparative assessment of the availability of electric buses in relation to diesel buses (of analogous capacity). The study was carried out in real operating conditions using the example of Lublin city. Over a period of 33 months, the availability of electric buses and diesel buses was tested in a sample of 18 vehicles for each type of bus. Availability indices were compared using the method of variance analysis. It was found that electric buses had a higher level of availability and no trend during the study period. The applied research method can be used in operational practice to monitor the risks associated with vehicle failure rates and the continuity of fleet operations.

The subject of this study was a distribution substation that feeds 14 fast DC chargers (80 kW) located at the bus depot in Lublin, Poland. The voltage variations were determined to be within the PN-EN 50160 standard limit values (±10% Un). There were several events registered when 4th, 6th, 8th, and 10th voltage harmonics were above the PN-EN 50160 limit during the charging of the electric buses. The obtained maximum 10 min average values of the total voltage harmonic distortion (THD) were 3.36%, 2.27%, and 2.89% for the first, second, and third phase, respectively, i.e., below the limit value of 8% required by PN-EN 50160. Due to the exceedance of the 6th voltage harmonic, the PN-EN 50160 requirements were not met.

The article analyses the performance characteristics and operating costs of the three types of trolley-buses equipped with alternative energy sources, which are used by the MPK (Municipal Transport Company) in Lublin. The selected applications are adapted for driving off traction in emergency...