Yao Li

Dr. Yao Li

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 May 2021 in IEEE Photonics Journal
Verified
Journal Article
Open access
TLTiming Li
Timing Li
YZYiqiang Zhao
Yiqiang Zhao
YLYao Li
Yao Li
Guoqing ZhouGuoqing Zhou
Guoqing Zhou
Non-uniformity is a common phenomenon in infrared imaging system, which seriously affects imaging quality. In view of the problems of existing non-uniformity correction of infrared images, such as loss of image details and blurred edge of image, an improved non-uniformity correction method of infrared images based on convolution neural network using long-short connections (LSC-CNN) is proposed. The proposed method designs a long-short connection residual network structure suitable for non-uniformity correction of infrared image.The network depth is increased to fully learn the noise by short connections, image sizes are adjusted to reduce the number of parameters, the long connection is used to solve the problem of image information loss caused by transposed convolution, and a multiply operation is carried out to enhance the contrast of corrected images. Besides, batch normalization is utilized to improve the training speed. The experimental results show that LSC-CNN has excellent performance in non-uniformity correction of infrared images whether qualitative evaluation or quantitative evaluation. LSC-CNN is especially effective in image detail preservation and image edge protection whose average PSNR exceeds 37.5 dB and the average SSIM is greater than 0.98.

26 August 2019 in IEEE Transactions on Circuits and Systems II: Express Briefs
Verified
Journal Article
Closed access
PWPeiyao Wang
Peiyao Wang
MYMao Ye
Mao Ye
XXXianzhao Xia
Xianzhao Xia
XZXiaoxiao Zheng
Xiaoxiao Zheng
YLYao Li
Yao Li
YZYiqiang Zhao
Yiqiang Zhao
To achieve the long range measurement capability and the accurate resolution in linear laser detection and ranging (LADAR) system, a 32-channel analog front end circuit featured with high gain, high bandwidth, and low noise characteristics is designed. The proposed three-stage analog front end (TS-AFE) includes a variable gain transimpedance amplifier, a differential voltage amplifier, and an analog equalizer. The first stage adopts the shunt-feedback topology to optimize the overall noise, the second stage helps to enlarge the input dynamic range further, and the last stage boosts the channel bandwidth. Furthermore, a 6-bit current digital-to-analog converter (DAC) is integrated in the equalizer to produce a built-in threshold voltage. The 32-channel TS-AFE chip is fabricated with 0.18-μm CMOS technology. The measurement results show that with the highest gain configuration, the circuit realizes 101.6 dB transimpedance gain, 190 MHz bandwidth, and 2.6 pA/sqrt(Hz) input noise current spectral density, respectively. The minimum detectable current achieves 0.4 μA with SNR = 10. The maximum output voltage swing is greater than 1000 mV, and the linear dynamic range reaches 64 dB. The power consumption per channel is as low as 37 mW from a single 3.3 V supply.

16 January 2024 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
Verified
Journal Article
Closed access
XZXiaoxiao Zheng
Xiaoxiao Zheng
MYMao Ye
Mao Ye
ZLZhiwei Li
Zhiwei Li
YLYao Li
Yao Li
QWQiuwei Wang
Qiuwei Wang
YZYiqiang Zhao
Yiqiang Zhao
This article presents a low noise and wide linear dynamic 20-channel analog front-end (AFE) array for frequency-modulated continuous-wave (FMCW) light detection and ranging (LiDAR) system. Each channel of the AFE array mainly consists of a shunt feedback transimpedance amplifier (SF-TIA) with a dc cancellation loop (DCL), a post amplifier, and an output buffer. The DCL is proposed to eliminate the dc current, comprising the dc current sunk to ground (dc-STG) and the dc current sourced from power supply (dc-SFP). In addition, the post amplifier, cascaded with an operational transconductance amplifier (OTA) and an SF-TIA, is proposed to decouple the relationship between gain and output common voltage, achieving both large gain and large output swing. Furthermore, the equalization technique is adopted to expand the bandwidth of the AFE array. The AFE array was implemented and fabricated in a 0.18- $\mu $ m CMOS technology. Measurement results show that the AFE array achieves the maximum transimpedance gain of 107 dB and eliminates the dc current between $-$ 150 and 250 $\mu $ A. With the maximum transimpedance gain, the measured bandwidth, the equivalent input-referred rms noise current, and the signal-to-crosstalk ratio (SCR) between adjacent channels are 165 MHz, 29.4 nArms, and $-$ 33.9 dB, respectively. The AFE array also achieves a linear dynamic range (DR) of 66 dB and the area of each channel is approximately equal to 0.16 $\times$ 1.3 mm $^{2}$ .

1 December 2021 in Microelectronics Journal
Verified
Journal Article
Closed access
YLYao Li
Yao Li
YZYiqiang Zhao
Yiqiang Zhao
YZYifei Zhao
Yifei Zhao
MYMao Ye
Mao Ye

27 August 2024 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
Verified
Journal Article
Closed access
YLYao Li
Yao Li
JGJunfeng Geng
Junfeng Geng
MYMao Ye
Mao Ye
JHJiaji He
Jiaji He
XZXiaoxiao Zheng
Xiaoxiao Zheng
YZYiqiang Zhao
Yiqiang Zhao
This article presents a novel readout circuit for the resistive tactile sensor array. Based on the 2-D scanning mechanism, a crosstalk suppression technique is proposed by combining the correlated double sampling (CDS) and zero potential method (ZPM). The output of the same sensor under different bias conditions is captured twice and amplified by a channel-parallel fully differential gain stage, performing analogous subtraction. To achieve nonuniformity compensation, the current injected into the readout channel is adjusted by the channel-parallel digital-to-analog converter (DAC). A successive approximation register (SAR) analog-to-digital converter (ADC) performs quantization, and the chip can be used as a serial peripheral interface (SPI) slave to update register values for gain configuration, power consumption control, and nonuniformity compensation The 180-nm CMOS prototype chip occupies an area of 4.8 $\text{mm}^{2}$ and consumes 285 $\mu$ W. In order to validate the design, a tactile sensing system is built, using the readout circuit along with a 10 $\times$ 10 flexible sensor array. With the techniques proposed in this article, the readout error of the sensors in array is less than 0.3.

30 October 2019 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
Verified
Journal Article
Closed access
MYMao Ye
Mao Ye
XZXiaoxiao Zheng
Xiaoxiao Zheng
YLYao Li
Yao Li
YZYiqiang Zhao
Yiqiang Zhao
This brief presents a low-complexity hybrid readout architecture that can extract both timing and amplitude information of the return pulse concurrently for a light detection and ranging radar (Lidar) receiver. To reconstruct the short return pulse, the core circuit of one sampling and storage array with an embedded time-to-digital converter (SSA-TDC) is proposed. Instead of relying on the conventional power-hungry high-speed ADC, it selectively samples the interested return pulse with high speed and stores the voltages for later quantization in the long idle interval. In the preceding stage of the SSA-TDC, the analog front-end circuit cascaded of a narrow-bandwidth transimpedance amplifier, a voltage amplifier, and an equalizer circuit is included. The prototype chip of the eight readout channels is designed and fabricated with the 0.18-μm CMOS process. The active circuit occupies an area of 1200 μm × 2100 μm, and the power consumption of one single channel is 45 mW with 3.3-V supply. The proposed SSA-TDC has achieved a dynamic error of 180 ps in the experimental study.