Background: The utilization of lymphocyte transformation testing (LTT) has increased for diagnosing metal sensitivity associated with total knee arthroplasty (TKA), but its validity for the diagnosis of TKA failure due to an immune reaction has not been established. In this study, we sought to characterize the relationship of a positive LTT result to histopathologic findings and clinical and functional outcomes. Methods: This was a retrospective study of 27 well-fixed, aseptic, primary TKA cases in which the patient had persistent pain and/or stiffness and underwent revision due to a suspected metal allergy to nickel, as determined on the basis of positive LTT. Revision procedures were performed by a single experienced arthroplasty surgeon. Periprosthetic tissue samples obtained at the time of revision surgery were scored using the aseptic lymphocyte-dominated vasculitis-associated lesion (ALVAL) scoring system. Results: Eight patients were categorized as mildly reactive; 8 patients, moderately reactive; and 11 patients, highly reactive to nickel by LTT. The predominant findings on routine histopathologic analysis were fibrosis and varying degrees of lymphocytic infiltration in 17 (63%) of the 27 cases. The average ALVAL score of the cohort was 3.1 ± 1.9, of a maximum score of 10. Average Knee Society Score (KSS) values improved post-revision, as did range of motion (all p < 0.01). Neither LTT stimulation index as a continuous variable nor as a categorical variable (mildly reactive, moderately reactive, highly reactive) was correlated with ALVAL score, pre-revision function (as assessed by KSS-clinical, KSS-functional, and range of motion), or change in function at the most recent follow-up (0.015 < r < 0.30, 0.13 < p < 0.95). In addition, the ALVAL score did not correlate significantly with either pre-revision or post-revision KSS or range of motion (0.061 < r < 0.365, 0.09 < p < 0.88). Conclusions: On the basis of this analysis, including histopathologic assessment, LTT results alone were insufficient for the diagnosis of TKA failure due to an immune reaction. A positive LTT may not indicate that an immune reaction is the cause of pain and stiffness post-TKA. The role of LTT in assessing TKA failure from an immune reaction needs further investigation. Diagnostic criteria for such TKA failure need to be established. Level of Evidence: Diagnostic Level IV. See Instructions for Authors for a complete description of levels of evidence.
Antibiotic-tolerant bacterial biofilms are notorious in causing PJI. Antibiotic loaded calcium sulfate bead (CSB) bone void fillers and PMMA cement and powdered vancomycin (VP) have been used to achieve high local antibiotic concentrations; however, the effect of drainage on concentration is poorly understood. We designed an in vitro flow reactor which provides post-surgical drainage rates after knee revision surgery to determine antibiotic concentration profiles. Tobramycin and vancomycin concentrations were determined using LCMS, zones of inhibition confirmed potency and the area under the concentration–time curve (AUC) at various time points was used to compare applications. Concentrations of antibiotcs from the PMMA and CSB initially increased then decreased before increasing after 2 to 3 h, correlating with decreased drainage, demonstrating that concentration was controlled by both release and flow rates. VP achieved the greatest AUC after 2 h, but rapidly dropped below inhibitory levels. CSB combined with PMMA achieved the greatest AUC after 2 h. The combination of PMMA and CSB may present an effective combination for killing biofilm bacteria; however, cytotoxicity and appropriate antibiotic stewardship should be considered. The model may be useful in comparing antibiotic concentration profiles when varying fluid exchange is important. However, further studies are required to assess its utility for predicting clinical efficacy.
17 May 2022 in Journal of Bone and Joint Infection
Introduction: Local antimicrobial delivery via calcium sulfate (CaSO4) beads is used as an adjunctive treatment for periprosthetic joint infection. There is limited clinical information describing the performance of antimicrobial-loaded CaSO4 (ALCS) in large-scale applications. We developed a simulated large joint model to study properties of eluting ALCS. Methods: The in vitro testing platform was an adapted standardized model for tribological testing of prosthetic total hips and total knees (ASTM F732). The model was 70 mL total fluid volume, 25 % bovine serum, and 75 % phosphate-buffered saline, using ISO standard 14242-1 for human synovial fluid simulation. Four brands of CaSO4 were evaluated. Each 10 mL of CaSO4 was loaded with 1.2 grams (g) of tobramycin and 1 g of vancomycin powders. A 35 mL bead volume, equaling 175 beads, of each product was placed in incubated flasks. The test period was 6 weeks with scheduled interval fluid exchanges. Fluid samples were tested for antibiotic and calcium concentrations and pH. Results: Antibiotic elution showed an initial burst on Day 1, followed by a logarithmic reduction over 1 week. Tobramycin fully eluted within 2.5 weeks. Vancomycin showed sustained release over 6 weeks. Calcium ion concentrations were high, with gradual decrease after 3 weeks. All four CaSO4 products were inherently acidic. Fluid became more acidic with the addition of antibiotics primarily driven by vancomycin. Discussion: Clinicians should be cognizant of tobramycin elution burst with ALCS in large loads. The main driver of acidic pH levels was vancomycin. We propose that joint complications may result from lowered fluid acidity, and we suggest clinical study of synovial pH.
Background: Implant-associated infections (IAIs) require aggressive debridement to eliminate microbial bioburden. The use of irrigants may improve microbial killing during debridement. This study compared the efficacy of surgical irrigants in vitro against Staphylococcus aureus alone and in combination with Candida albicans, in both planktonic and biofilm states. Methods: Full-strength Dakin’s solution, 0.35% povidone-iodine (PI), 10% PI, 3% hydrogen peroxide (HP), a 1:1 combination of 10% PI and 3% HP (PI + HP), Irrisept, XPERIENCE, Bactisure, and normal saline solution were tested. For planktonic testing, 1 × 106 colony-forming units (CFUs) of S. aureus and C. albicans were utilized, and biofilms were grown in these conditions on 0.8 × 10-mm titanium alloy Kirschner wires for 48 hours. Killing assays were performed using 5-minute dwell times. Success was defined by complete eradication of planktonic or biofilm CFUs. Results: PI + HP and Bactisure were the only irrigants to eradicate S. aureus in both planktonic and biofilm states. PI + HP was the only irrigant to eradicate polymicrobial S. aureus + C. albicans bioburden in both states. Conclusions: PI + HP and Bactisure were superior irrigants against S. aureus, eliminating it in planktonic and biofilm states. PI + HP was the only irrigant to eradicate polymicrobial S. aureus + C. albicans bioburden in both states. In vivo studies are needed to evaluate the clinical effectiveness. Clinical Relevance: Surgical irrigants have variable efficacy in eradicating microbes depending on their state of existence (planktonic versus biofilm). In this study, the most effective eradication of polymicrobial S. aureus + C. albicans bioburden was a 1:1 combination of 10% PI and 3% HP, which is of nominal cost.
Aims: Large acetabular bone defects encountered in revision total hip arthroplasty (THA) are challenging to restore. Metal constructs for structural support are combined with bone graft materials for restoration. Autograft is restricted due to limited volume, and allogenic grafts have downsides including cost, availability, and operative processing. Bone graft substitutes (BGS) are an attractive alternative if they can demonstrate positive remodelling. One potential product is a biphasic injectable mixture (Cerament) that combines a fast-resorbing material (calcium sulphate) with the highly osteoconductive material hydroxyapatite. This study reviews the application of this biomaterial in large acetabular defects. Methods: We performed a retrospective review at a single institution of patients undergoing revision THA by a single surgeon. We identified 49 consecutive patients with large acetabular defects where the biphasic BGS was applied, with no other products added to the BGS. After placement of metallic acetabular implants, the BGS was injected into the remaining bone defects surrounding the new implants. Patients were followed and monitored for functional outcome scores, implant fixation, radiological graft site remodelling, and revision failures. Results: Mean follow-up was 39.5 months (36 to 71), with a significant improvement in post-revision function compared to preoperative function. Graft site remodelling was rated radiologically as moderate in 31 hips (63%) and strong in 12 hips (24%). There were no cases of complete graft site dissolution. No acetabular loosening was identified. None of the patients developed clinically significant heterotopic ossification. There were twelve reoperations: six patients developed post-revision infections, three experienced dislocations, two sustained periprosthetic femur fractures, and one subject had femoral component aseptic loosening. Conclusion: Our series reports bone defect restoration with the sole use of a biphasic injectable BGS in the periacetabular region. We did not observe significant graft dissolution. We emphasize that successful graft site remodelling requires meticulous recipient site preparation. Cite this article: Bone Jt Open 2022;3(12):991–997.
10 November 2021 in Journal of Bone and Joint Infection
Chronic periprosthetic joint infection (PJI) is a devastating complication that requires an aggressive eradication protocol. Local antimicrobial delivery via dissolvable calcium sulfate (CaSO4) using small-sized beads (3–8 mm) has been utilized as an adjunctive treatment combined with implant exchange, radical debridement, and antimicrobial loaded acrylic spacers. The non-exothermic setting of CaSO4 theoretically allows for any antimicrobial agent to be used, so long as mixing methods provide a consistent fabrication within a reasonable set time. This study performed the first in vitro mixing study, in which various antimicrobial agents, used singularly and in combination, were mixed with a synthetic CaSO4 product to observe and document their interactions. The study was performed in a simulated operating room environment. We report a standard mix formula with set times, testing 22 different antimicrobial agents, combinations, and doses. For some antimicrobials and combinations, set times using the standard formula were either too fast or exceedingly slow. For these 14 antimicrobial agents and combinations, we were able to arrive at individualized mixing methods. We present all mixing formulas and set times. In all, we were able to establish mixing methods that incorporate all antimicrobial agents and combinations that we have seen utilized via surgeon-directed use.